Cement for stabilisation of industrial residues containing heavy metals

A method aimed at decreasing the toxicity of heavy metals [namely, Zn(II) and Cr(III)] in real polluted residues by immobilisation has been developed. The residues were processed either with two cement-type stabilisers or lime. The cement-type stabilisers were Portland cement and Depocrete SM/2 at the self-generated pH (ca. 11) which afforded physical as well as chemical potential for the immobilisation of heavy metals. The other stabiliser, lime, reduced organic compounds, thus favouring the decrease of the chemical oxygen demand (COD) and endowing the residue with better mechanical properties for transport. After leaching the stabilised residues using the standard leaching test [Order 13/10/89, Boletín Oficial del Estado (BOE) 270 10/11/89], three ways for establishing the toxicity of the treated residues were used, namely: (1) the ecotoxicity test using Photobacterium phosphoreum (DIN 38 412); (2) determination of the concentration of heavy metals by atomic absorption spectrometry (AAS); (3) determination of the COD or oxygen required for complete chemical oxidation of a water sample. Portland cement (20%) blended with Depocrete SM/2 (3%) acted as an effective stabiliser for residues containing heavy metals as it increased the ecotoxicity index (EC50) by more than five times. Thus the heavy metal concentration in the leaching liquid was lowered to less than 0.1 mg l-1. The addition of 5% of lime afforded a residue easily transportable from the place of treatment to the landfill. The precision of the method was studied in terms of both repeatability and reproducibility. The values found with respect to EC50 and expressed as the relative standard deviation (RSD) were 1.6% and 5.1%, respectively.     

Comparative evaluation of procedures for the determination of PAH in low-volume samples

The aim of this investigation was to evaluate a simplified version of an HPLC method for the determination of PAH in suspended particles collected from small air volumes indoors, outdoors or in personal exposure measurements. The simplification consisted in: (a) collecting PAH by low-volume samplers; (b) extracting PAH ultrasonically; and (c) omitting separation of interfering substances before analysis by HPLC. The results show that the introduction of these modifications affords a considerable reduction in analysis time and solvent expenditure, without affecting the quality of measurement.     

PAH Levels and Profiles in the Suspended Particulate Matter in Zagreb through Four Seasons

This paper presents the analysis of polycyclic aromatic hydrocarbons (PAHs) measured in all four seasons in suspendedparticulate matter (SPM) collected with a high-volume sampler on one measuring site in the northern part of Zagreb. About 30 samples of SPM were analysed for each season, including workdays and weekends and there were no differences amongst them. The concentrations of all PAHs were highest in winter andlowest in summer. The spring PAH concentrations were lower thanthe autumn ones, as the spring had more sunny and warm days. Theprofiles of PAH/BaP at the measurement sites showed that the mainsource of PAHs in spring and summer was traffic while asubstantial amount of autumn and winter PAHs, besides traffic,came from heating.     

Survey of carbon monoxide concentrations in selected urban microenvironments

Carbon monoxide concentrations were measured in six shops situated in narrow busy streets of the city centre for ten days in winter and ten days in summer and correlated with the measurements simultaneaously performed at an outdoor background reference point. The correlation was significant for four out of six shops in winter, but not in summer. Day-to-day variations seemed to be influenced by gross contamination due to changing weather conditions whereas differences in concentration levels from site to site were strongly influenced by the proximity and density of traffic. The exposure of a pedestrian in winter was in good correlation with background outdoor levels and it was considerably lower than that of a car driver driving though the city.     

Study of personal exposure to airborne respirable particles and carbon monoxide

Simultaneous measurements of CO and respirable particles (RP) at outdoor network stations and of personal exposure in a sample of twelve volunteers were carried out during the winter and summer season of 1980/81 in order to evaluate how well personal exposure can be assessed from outdoor network station data.The results have shown that personal exposure of our subjects to both CO and RP is in best correlation with exposure at home where subjects spend in the average nearly 70% of their time. While personal exposure to CO can hardly be related to outdoor CO levels, personal exposure to RP is in fair agreement with simultaneously measured outdoor concentrations in winter (but not in summer). A large intercept on WAE axis of the WAE/RP relationship indicates that a considerable part of personal exposure to RP should be attributed to particles which are not of indoor origin. This part does not follow the seasonal and day-to-day changes in outdoor RP concentration and causes a negative, but highly significant correlation between WAE/RP ratio and RP.     

Prevalence of Human Parainfluenza Viruses and Noroviruses Genomes on Office Fomites

The aim of this study was to evaluate the potential role of office fomites in respiratory (human parainfluenza virus 1—HPIV1, human parainfluenza virus 3—HPIV3) and enteric (norovirus GI—NoV GI, norovirus GII—NoV GII) viruses transmission by assessing the occurrence of these viruses on surfaces in office buildings. Between 2016 and 2017, a total of 130 surfaces from open-space and non-open-space rooms in office buildings located in one city were evaluated for HPIV1, HPIV3, NoV GI, and NoV GII viral RNA presence. Detection of viruses was performed by RT-qPCR method. Study revealed 27 positive samples, among them 59.3% were HPIV3-positive, 25.9% HPIV1-positive, and 14.8% NoV GII-positive. All tested surfaces were NoV GI-negative. Statistical analysis of obtained data showed that the surfaces of office equipment including computer keyboards and mice, telephones, and desktops were significantly more contaminated with respiratory viruses than the surfaces of building equipment elements such as door handles, light switches, or ventilation tracts (χ ² p = 0.006; Fisher’s Exact p = 0.004). All examined surfaces were significantly more contaminated with HPIVs than NoVs (χ ² p = 0.002; Fisher’s Exact p = 0.003). Office fomites in open-space rooms were more often contaminated with HPIVs than with NoVs (χ ² p = 0.016; Fisher’s Exact p = 0.013). The highest average concentration of HPIVs RNA copies was observed on telephones (1.66 × 10² copies/100 cm²), while NoVs on the light switches (1.40 × 10² copies/100 cm²). However, the Kruskal–Wallis test did not show statistically significant differences in concentration levels of viral RNA copies on surfaces between the all tested samples. This study unequivocally showed that individuals in office environment may have contact with both respiratory and enteric viral particles present on frequently touched surfaces.     

An analysis of university sustainability reports from the GRI database: an examination of influential variables

In the business context, many papers have examined whether certain variables can affect sustainability disclosure practices. However, research on universities has mainly been addressed to explore the extent of sustainability information reported with little focus on determining the factors that may affect it. This paper analyzes the influence exerted by some variables concerning the extent of information reported in the university sustainability reports included in this study. To accomplish this task, data were collected using a content analysis of the university sustainability reports extracted from the GRI sustainability disclosure database. The findings reveal that sustainability disclosure practices by universities are explained by different factors, among which are institutionalization, geographical region, external assurance and leadership. Such results are supported jointly by the underpinnings of the institutional and legitimacy theories in response to coercive and mimetic pressures and by the need to improve reputation in society.