A socioeconomic and natural vulnerability index for oil spills in an Amazonian harbor: A case study using GIS and remote sensing

The coastal zone of the Brazilian state of Maranhão is an area characterized by a large variety of human activities and services, in particular in the Itaqui-Bacanga port complex (IBC). The IBC is an area prone to oil spills resulting from the processes of transportation, storage, and tank cleaning. The present study aimed to map the different physical environments adjacent to this complex and the socioeconomic profile of the local population that would be most vulnerable to this type of disaster. Vulnerability studies are essential as one of the first step in the development of an integrated coastal zone management. The variables analyzed in this study included geomorphological units, and the income, education, and dependence on fishing of the local population. The estimate of the vulnerability index was based on the relationships between these variables, which were used to generate a vulnerability map using GIS and the interpretation of high-resolution remote sensing, showing the areas of highest priority for intervention in the case of oil spills. The analysis of the natural and socioeconomic environments indicated that the areas of highest vulnerability correspond to the mangroves and the Vila Nova and Alto da Esperança neighborhoods, respectively. These neighborhoods have a direct relationship with fishing, and low levels of both income and education. By contrast, the lowest vulnerability was attributed to the coastal plateau and the central Anjo da Guarda neighborhood, which is occupied by residents with relatively high income and education, who do not depend on fishing.     

Lightning protection scenarios of communication tower sites; human hazards and equipment damage

This paper provides comprehensive analysis on the lightning protection scenarios in 48 communication and broadcasting towers situated in similar isokeraunic contours in Sri Lanka at 79°–81° East and 5°–10° North. The investigation has been conducted to study the hazardous environment created on the tower and in the neighbourhood in the event of a lightning strike to the tower. The results show that a direct strike to an antenna structure in a metallic tower is rare irrespective of the presence of an air-termination or a down conductor. However, side flashing or arcing to antenna structures is highly possible once the air-termination and/or down conductor is installed and attempts are made to insulate the system from the tower. The outcome also shows that equipotential bonding of the grounding system, a distributed grounding network including a ring conductor and a suitable system of surge protective devices play a much vital role in lightning protection of equipment and safety of people compared to the effects of simply achieving a low grounding resistance. However, in the absence of such integrated, distributed and equipotentialized grounding system, a high value of ground resistance will sharply increase the possibility of accidents and damage. Considering the observations of the investigations into account we have designed a concrete embedded grounding system for tower sites at problematic locations. Finally, the scenarios for safety management at telecommunication tower sites have been discussed.     

Application and sensitivity testing of a eutrophication assessment method on coastal systems in the United States and European Union

The Assessment of Estuarine Trophic Status (ASSETS) screening model has been extended to allow its application to both estuarine and coastal systems. The model, which combines elements of pressure, state and response, was tested on four systems: Maryland Coastal Bays and Long Island Sound in the United States and The Firth of Clyde (Scotland) and Tagus Estuary (Portugal) in the European Union. The overall scores were: Maryland Coastal Bays: Bad; Firth of Clyde: Poor; Tagus Estuary: Good. Long Island Sound was modelled along a timeline, using 1991 data (score: Bad) and 2002 data (score: Moderate). The improvement registered for Long Island Sound is a consequence of the reduction in nutrient loading, and the ASSETS score changed accordingly. The two main areas where developments are needed are (a) In the definition of type-specific ranges for eutrophication parameters, due to the recognition that natural or pristine conditions may vary widely, and the use of a uniform set of thresholds artificially penalizes some systems and potentially leads to misclassification; (b) In the definition and quantification of measures which will result in an improved state through a change in pressures, as well as in the definition of appropriate metrics through which response may be assessed. One possibility is the use of detailed research models where different response scenarios potentially produce changes in pressure and state. These outputs may be used to drive screening models and analyze the suitability of candidate metrics for evaluating management options.     

Evaluation of compliance with national legislation on emissions in Portugal

More than 13 years after publication of the first air quality laws in Portugal and more than 10 years after the publication of the respective emission limits, it seems appropriate to analyze the degree of compliance by the Portuguese manufacturing industry. Using the data from emission measurements made regularly by the Instituto de Soldadura e Qualidade, the only officially accredited laboratory according to standard ISO 17025, I analyzed a set of approximately 400 sources in terms of compliance with the emission limits regarding total suspended particulates, sulfur dioxide, nitrogen oxides, and volatile organic compounds. I evaluated compliance through a nondimensional parameter and plotted it versus the emission flow rate to derive conclusions: the results indicate that emission limits are generally met regarding sulfur dioxide and nitrogen oxides but not for the other pollutants considered in this study. However, noncompliance occurs mainly for very low emission flow rates, which suggests some alterations in the emission limits, which are being revised at the moment. These alterations will include the exemption of measurements in minor sources.     

Assessment of plastic lumber production in Brazil as a substitute for natural wood

Environment, Development and Sustainability - This review aimed to analyze plastic lumber manufacturing in Brazil, a country with a large amount of natural wood, and devise strategies to boost...     

Practices of energy use management and sustainable performance in Brazilian mineral industries

Energy is an essential asset for the existence of industrial activities, however, the absence of energy use management may lead to numerous environmental, economic, and social impacts. Thus, industries, which are major consumers of energy, play an essential role in seeking to preserve the energy system. This study aimed at analyzing the practices of energy use management and their relation to sustainable performance in the industries within the Brazilian mineral sector. The practices of energy use management were measured using the model proposed by Liu et al. (2012, Journal of Cleaner Production, 26, 79–89). After that, evidence of sustainable performance was identified based on performance indicators developed by the Global Reporting Initiative (2006, 2010, 2014). The study is characterized as quantitative, and it was conducted through a survey of industries linked to the Brazilian Mining Association. Through our results, we verified that the practices related to energy use management existent in the companies that we studied are subjected to periodic verification of the impacts caused by company activities on the environment, and that attention to energy use provides an incentive to daily practices of energy saving. On the other hand, the practices of energy use management are still little disseminated among these companies, as is certification to the International Organisation for Standardization's (ISO) Energy Management Systems framework, ISO 50001. In general, through the analyses that we performed, we can verify the existence of positive associations between the factors related to the practices of energy use management and to corporate sustainable performance.     

14C content in vegetation in the vicinities of Brazilian nuclear power reactors

(14)C specific activities were measured in grass samples collected around Brazilian nuclear power reactors. The specific activity values varied between 227 and 299 Bq/kg C. Except for two samples which showed (14)C specific activities 22% above background values, half of the samples showed background specific activities, and the other half had a (14)C excess of 1-18%. The highest specific activities were found close to the nuclear power plants and along the main wind directions (NE and NNE). The activity values were found to decrease with increasing distance from the reactors. The unexpectedly high (14)C excess values found in two samples were related to the local topography, which favors (14)C accumulation and limits the dispersion of the plume. The results indicate a clear (14)C anthropogenic signal within 5 km around the nuclear power plants which is most prominent along northeastwards, the prevailing wind direction.     

Characterisation of non-condensable sulphur containing gases from Kraft pulp mills

This paper describes work performed on the sampling and analysis of non-condensable gases (NCG) emitted from diffuse sources of a Portuguese Kraft pulp mill, which is the background information for a NCG collection, treatment and disposal system. The variability found in the composition of the gaseous compounds showed the existence of gaseous streams other than typical total reduced sulphur (TRS) compounds as usually described. From the measured TRS concentrations and the gas flow rate from each source it was possible to calculate the emission flow rate, E, of each source. These emission flow rates were then divided into three categories which are quite useful to identify significant sources and to choose abatement techniques. The methodology presented allows for a precise quantification of sources so that similar emissions can be grouped for treatment purposes. Sources with an emission flow rate bigger than 1 kg/h have a marked effect on the overall TRS emissions of the mill, as they are major contributors. It was also found that a new analytical procedure using Restek columns is more easy to use and overcomes operational problems noticed previously, namely a run time of 20-25 min instead of 50-60 min.     

Degradation of reactive dyes I. A comparative study of ozonation, enzymatic and photochemical processes

The environmental problems associated with textile activities are represented mainly by the extensive use of organic dyes. A great number of these compounds are recalcitrant and shown carcinogenic or mutagenic character. In this work three processes were studied for degradation of an anthraquinone dye (C.I. reactive blue-19). The ozonation process leads to complete decolorization with a very short reaction time; however, effective mineralization of the dye was not observed. The enzymatic process promotes quick decolorization of the dye; nevertheless, maximum decolorization degrees of about 30% are insignificant in relation to the decolorization degree achieved by the other processes. The best results were found for the photocatalytical process. The use of ZnO or TiO2 as photocatalysts, permits total decolorization and mineralization of the dye with reaction times of about 60 min.