Wet weather impact on trihalomethane formation potential in tributaries to drinking water reservoirs

During rain storm events, land surface runoff and resuspension of bottom sediments cause an increase in Trihalomethane (THM) precursors in rivers. These precursors, when chlorinated at water treatment facilities will lead to the formation of THMs and hence impact drinking water resources. In order to evaluate the wet weather impact on the potential formation of THMs, river samples were collected before, during and after three rain storms ranging from 15.2 to 24.9 mm precipitation. The samples were tested for THM formation potential and other indicators including UV254 absorbance, turbidity and volatile suspended solid (VSS). Average levels of THMs increased from 61 μg/l during dry weather to 131 μg/l during wet weather, and then went back to 81 μg/l after rain ended. Wet weather values of THM are well above the maximum contaminant level (MCL) 80 μg/l, set by EPA for drinking water. THM indicators also exhibited similar trends. Average levels increased from 0.6 to 1.8 abs; 2.6 to 6 ntu; and 7.5 to 15 mg/l respectively for UV254, turbidity and VSS. A positive correlation was observed between THM formation and THM indicators. The t-test of significance (p-value) was less than 0.05 for all indicators, and R values ranged from 0.85 to 0.92 between THMs and the indicators, and 0.72 to 0.9 among indicators themselves.     

Soil contamination of heavy metals in the Katedan Industrial Development Area, Hyderabad, India

Studies on quantitative soil contamination due to heavy metals were carried out in Katedan Industrial Development Area (KIDA), south of Hyderabad, Andhra Pradesh, India under the Indo-Norwegian Institutional Cooperation Programme. The study area falls under a semi-arid type of climate and consists of granites and pegmatite of igneous origin belonging to the Archaean age. There are about 300 industries dealing with dyeing, edible oil production, battery manufacturing, metal plating, chemicals, etc. Most of the industries discharge their untreated effluents either on open land or into ditches. Solid waste from industries is randomly dumped along roads and open grounds. Soil samples were collected throughout the industrial area and from downstream residential areas and were analysed by X-ray Fluorescence Spectrometer for fourteen trace metals and ten major oxides. The analytical data shows very high concentrations of lead, chromium, nickel, zinc, arsenic and cadmium through out the industrial area. The random dumping of hazardous waste in the industrial area could be the main cause of the soil contamination spreading by rainwater and wind. In the residential areas the local dumping is expected to be the main source as it is difficult to foresee that rain and wind can transport the contaminants from the industrial area. If emission to air by the smokestacks is significant, this may contribute to considerable spreading of contaminants like As, Cd and Pb throughout the area. A comparison of the results with the Canadian Soil Quality Guidelines (SQGL) show that most of the industrial area is heavily contaminated by As, Pb and Zn and local areas by Cr, Cu and Ni. The residential area is also contaminated by As and some small areas by Cr, Cu, Pb and Zn. The Cd contamination is detected over large area but it is not exceeding the SQGL value. Natural background values of As and Cr exceed the SQGL values and contribute significantly to the contamination in the residential area. However, the availability is considerably less than anthropogenic contaminants and must therefore be assessed differently. The pre- and post-monsoon sampling over two hydrological cycles in 2002 and 2003 indicate that the As, Cd and Pb contaminants are more mobile and may expect to reach the groundwater. The other contaminants seem to be much more stable. The contamination is especially serious in the industrial area as it is housing a large permanent residing population. The study not only aims at determining the natural background levels of trace elements as a guide for future pollution monitoring but also focuses on the pollution vulnerability of the watershed. A plan of action for remediation is recommended.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Prediction models of CO, SPM and SO2 concentrations in the Campo de Gibraltar Region, Spain: a multiple comparison strategy

The 'Campo de Gibraltar' region is a very industrialized area where very few air pollution studies have been carried out. Up to date, no model has been developed in order to predict air pollutant levels in the different towns spread in the region. Carbon monoxide (CO), Sulphur dioxide (SO(2)) and suspended particulate matter (SPM) series have been investigated (years 1999-2000-2001). Multilayer perceptron models (MLPs) with backpropagation learning rule have been used. A resampling strategy with two-fold crossvalidation allowed the statistical comparison of the different models considered in this study. Artificial neural networks (ANN) models were compared with Persistence and ARIMA models and also with models based on standard Multiple Linear Regression (MLR) over test sets with data that had not been used in the training stage. The models based on ANNs showed better capability of generalization than those based on MLR. The designed procedure of random resampling permits an adequate and robust multiple comparison of the tested models. Principal component analysis (PCA) is used to reduce the dimensionality of data and to transform exogenous variables into significant and independent components. Short-term predictions were better than medium-term predictions in the case of CO and SO(2) series. Conversely, medium-term predictions were better in the case of SPM concentrations. The predictions are significantly promising (e.g., d (SPM 24-ahead) = 0.906, d (CO 1-ahead) = 0.891, d (SO2 1-ahead) = 0.851).     

How Do River Nitrate Concentrations Respond to Changes in Land-use? A Modelling Case Study of Headwaters in the River Derwent Catchment,North Yorkshire,UK

A combined semi-distributed hydrological model (CASCADE/QUESTOR) is used to evaluate the steady-state that may be achieved after changes in land-use or management and to explore what additional factors need to be considered in representing catchment processes. Two rural headwater catchments of the River Derwent (North Yorkshire, UK) were studied where significant change in land-use occurred in the 1990s and the early 2000s. Much larger increases in mean nitrate concentration (55%) were observed in the catchment with significant groundwater influence (Pickering Beck) compared with the surface water-dominated catchment (13% increase). The increases in Pickering Beck were considerably greater than could be explained by the model in terms of land-use change. Consequently, the study serves to focus attention on the long-term increases in nitrate concentration reported in major UK aquifers and the ongoing and chronic impact this trend is likely to be having on surface water concentrations. For river environments, where groundwater is a source, such trends will mask the impact of measures proposed to reduce the risk of nitrate leaching from agricultural land. Model estimates of within-channel losses account for 15–40% of nitrate entering rivers.     

A new method for municipal solid waste incinerator (MSWI) fly ash inertization, based on colloidal silica

Municipal solid waste incineration (MSWI) is a straightforward way to manage waste, however the disposal of process byproducts, mainly bottom and fly ash, is still a problem, because of their hazardous contents. Fly ash is a byproduct of many other processes that involve combustion to produce energy. In this paper we present and discuss a new method for MSWI fly ash inertization, mainly based on the use of colloidal silica as a stabilization agent for metals. In the patented procedure, fly ash of different provenance can be used to produce an inert and non-hazardous material, that can be reused. In fact to make the recovery process more efficient, landfilling should be totally avoided. For this reason, to enhance the possibility of reuse, a washing process, for salts recovery, is proposed as a final step of the inertization procedure. The obtained inert material is called COSMOS (COlloidal Silica Medium to Obtain Safe inert), and it is composed of calcium carbonate, calcium sulfate, silicon oxide and a wide quantity of non-soluble amorphous compounds. COSMOS does not contain any corrosive salts. This makes it extremely interesting for cement industry applications with several other advantages, and environmental benefits. The new proposed inertization procedure appears very promising, because it allows MSWI fly ash to be considered a valuable resource. Thanks to the obtained results, a demonstration project, in the frame of LIFE+, has been funded by the European Commission (LIFE+ 2008 project ENV/IT/000434, ).     

Assessing reliable indicators to sewage pollution in coastal soft-bottom communities

Physicochemical characteristics of sediment and benthic communities were studied in the proximity of seven sewage outfalls with differences in flow and wastewater treatment in the Western Mediterranean Sea. Redox potential was the only abiotic parameter which showed a pattern related with distance to outfalls, whereas granulometry, percentage of organic matter, metal concentrations or pH did not show changes related with outfall presence. Benthic community analysis proved to be the most suitable monitoring tool. The results showed that the highest impacted stations corresponded with those closest to outfall with the highest flow and only pre-treatment, whilst a decrease of this tendency was detected in the locations where secondary treatment takes place. Meta-analysis showed a decrease of amphipods and tanaids abundance as well as redox potential, as the indicators with the clearest response to sewage presence.     

Pollution by organochlorine pesticides in Navachiste-Macapule,Sinaloa, Mexico

The lagoon system of Navachiste-Macapule is located in northern Mexico, in the state of Sinaloa, with an area of 24,000 ha. The main economic activity in the area is agriculture, and the lagoon lies next to the irrigation district ID-063 which covers 116,615 ha. The purpose of this study is to evaluate the levels of pollution generated by organochlorine pesticides (OC) in the surface sediments of the lagoon and in the agricultural drains of the ID-063 that are supposedly transported into the system as a result of agricultural activities and runoff from adjacent land. For this, between 2006 and 2007, 45 surface sediment samples were collected (warm dry, rainy and cold dry) from 15 sampling sites, during the three climatic seasons. Of these, eight were located inside the lagoon in marine conditions (salinity >31 PSU) and seven in the agricultural drains of the ID-063 in freshwater conditions (salinity <5 PSU). The average concentration of the OC in the sediments was 44.75 ng g^− 1, among which the group of the alicyclic compounds presented the greatest concentrations. The average value of the total organic carbon (TOC) in the sediments of the system was 0.90%. The sediments collected inside the lagoon had an average OC concentration of 18.97 ng g^− 1, and the predominant type of sediment was fine to very fine sand. The average OC concentration in the sediments collected in the agricultural drains was 75.69 ng g^− 1, where fine sediments (silt) were predominant. The presence of methoxychlor, endrin and heptachlor suggested that these compounds were continuously used in the system, even though their use is forbidden in Mexico.     

Impact of water quality on bacterioplankton assemblage along Cértima River Basin (central western Portugal) assessed by PCR–DGGE and multivariate analysis

The information on bacterial community composition (BCC) in Portuguese water bodies is very scarce. Cértima River (central western Portugal) is known to have high levels of pollution, namely organic. In the present work, the BCC from a set of 16 water samples collected from Cértima River Basin and its main tributaries was characterized using 16S rDNA–denaturing gradient gel electrophoresis, a culture-independent molecular approach. Molecular data were related to environmental parameters through multivariate analysis to investigate potential impact of water pollution along the river. Principal component analysis using environmental data showed a water quality gradient from more pristine waters (at the mountain tributaries) to waters with increasingly eutrophic potential (such as Fermentelos Lake). This gradient was mainly defined by factors such as organic and inorganic nutrient sources, electrical conductivity, hydrogen carbonate concentration, and pH. Molecular results showed variations in BCC along Cértima River Basin but in the main river section, a Bacteroidetes phylotype (Flavobacterium sp.) proved to be dominant throughout the river course. Multivariate analysis suggests that spatial variation of BCC along the Cértima River Basin depended mainly on parameters such as Chl a, total suspended solid (TSS), total organic carbon, electrical conductivity, and HCO _boxclose^-_{3}^{-} levels. Bacteroidetes phylotypes were all related to higher electrical conductivity and HCO₃^-_{3}^{-} levels although some of these were also correlated with high SO₄^2-_{4}^{2-} and others with high soluble reactive phosphorus, nitrate, TN, and Kjeld-N levels. The Gammaproteobacteria occurrence was correlated with high SO₄^2-_{4}^{2-} levels. One of the Betaproteobacteria phylotypes showed to correlate with low redox potential (E_h) and high temperature, pH, TSS, and Chl a levels while another one showed a negative correlation with Chl a values.