Protection from steam at high pressures: development of a test device and protocol.

Extensive use of pressurized steam in the oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed and evaluated. Several factors were considered while designing the test device to simulate work site conditions. Fabrics were exposed to steam at 2 distances (50 and 100 mm) and 2 pressures (207 and 69 kPa). Theoretical considerations included heat and mass transfer, and fabric structure and performance properties. The test device and procedure differentiated well among both fabrics and exposure conditions. For all fabrics, maximum heat transfer was observed at highest steam pressure and shortest distance. Laminated and coated fabrics performed better than a fabric without such treatments.     

AN ANTIDEGRADATION POLICY FOR PRESERVING SURFACE WATER QUALITY IN FLORIDA1

ABSTRACT: As part of its overall system for protecting aquatic systems from unnecessary degradation, the State of Florida provides special protection for water bodies of unusual importance. Such water bodies are designated as “Outstanding Florida Waters” (OFW5). New discharges to OFWs are possible only if certain stringent criteria are met. A new point source direct discharge to an OFW is usually not allowed if it would cause any lowering of ambient water quality. A new indirect discharge (upstream from an OFW boundary) may be allowed only if it would not significantly degrade the OFW. To date, the advantages of the OFW system have clearly outweighed the disadvantages, and OFW designations are helping to protect Florida's most valuable waters from additional degradation. Florida's system could be a useful model for other jurisdictions wanting to provide special protection to special water bodies.     

Mechanical properties and microstructure of cement mortars incorporating Cd-zeolitized fly ash

Journal of Material Cycles and Waste Management - A solid enriched with NaA zeolite was synthesized from a coal fly ash, and the so-obtained zeolitized material was used as ion exchanger for...     

Chicken manure biochar as liming and nutrient source for acid Appalachian soil

Acid weathered soils often require lime and fertilizer application to overcome nutrient deficiencies and metal toxicity to increase soil productivity. Slow-pyrolysis chicken manure biochars, produced at 350 and 700°C with and without subsequent steam activation, were evaluated in an incubation study as soil amendments for a representative acid and highly weathered soil from Appalachia. Biochars were mixed at 5, 10, 20, and 40 g kg into a Gilpin soil (fine-loamy, mixed, active, mesic Typic Hapludult) and incubated in a climate-controlled chamber for 8 wk, along with a nonamended control and soil amended with agronomic dolomitic lime (AgLime). At the end of the incubation, soil pH, nutrient availability (by Mehlich-3 and ammonium bicarbonate diethylene triamine pentaacetic acid [AB-DTPA] extractions), and soil leachate composition were evaluated. Biochar effect on soil pH was process- and rate-dependent. Biochar increased soil pH from 4.8 to 6.6 at the high application rate (40 g kg), but was less effective than AgLime. Biochar produced at 350°C without activation had the least effect on soil pH. Biochar increased soil Mehlich-3 extractable micro- and macronutrients. On the basis of unit element applied, increase in pyrolysis temperature and biochar activation decreased availability of K, P, and S compared to nonactivated biochar produced at 350°C. Activated biochars reduced AB-DTPA extractable Al and Cd more than AgLime. Biochar did not increase NO in leachate, but increased dissolved organic carbon, total N and P, PO, SO, and K at high application rate (40 g kg). Risks of elevated levels of dissolved P may limit chicken manure biochar application rate. Applied at low rates, these biochars provide added nutritional value with low adverse impact on leachate composition.     

Spatial variability of sediment ecotoxicity in a large storm water detention basin

Detention basins are valuable facilities for urban storm water management, from both the standpoint of flood control and the trapping of pollutants. Studies performed on storm water have shown that suspended solids often constitute the main vector of pollutants (heavy metals, polycyclic aromatic hydrocarbon (PAH), etc.). In order to characterise the ecotoxicity of urban sediments from storm water detention basins, the sediments accumulated over a 6-year period were sampled at five different points through the surface of a large detention basin localised in the east of Lyon, France. A specific ecotoxicological test battery was implemented on the solid phase (raw sediment) and the liquid phase (interstitial water of sediments). The results of the study validated the method formulated for the ecotoxicological characterization of urban sediments. They show that the ecotoxicological effect of the sediments over the basin is heterogeneous and greater in areas often flooded. They also show the relationship between, on one hand, the physical and chemical characteristics of the sediments and, on the other hand, their ecotoxicity. Lastly, they contribute to a better understanding of the dynamics of the pollution close to the bottom of detention basins, which can be useful for improving their design. The results of this research raise particularly the issue of using oil separators on the surface of detention basins.     

Metal mobilization in soil by two structurally defined polyphenols

Polyphenols including tannins comprise a large percentage of plant detritus such as leaf litter, and affect soil processes including metal dynamics. We tested the effects of tannins on soil metal mobilization by determining the binding stoichiometries of two model polyphenols to Al(III) and Fe(III) using micelle-mediated separation and inductively coupled plasma optical emission spectroscopy (ICP-OES). By fitting the data to the Langmuir model we found the higher molecular weight polyphenol (oenothein B) was able to bind more metal than the smaller polyphenol (epigallocatechin gallate, EGCg). For example, oenothein B bound 9.43 mol Fe mol^?1, while EGCg bound 4.41 mol of Fe mol^?1. Using the parameters from the binding model, we applied the Langmuir model for competitive binding to predict binding for mixtures of Al(III) and Fe(III). Using the parameters from the single metal experiments and information about polyphenol sorption to soils we built a model to predict metal mobilization from soils amended with polyphenols. We tested the model with three natural soils and found that it predicted mobilization of Fe and Al with r² = 0.92 and r² = 0.88, respectively. The amount of metal that was mobilized was directly proportional to the maximum amount of metal bound to the polyphenol. The secondary parameter in each model was the amount of weak organically chelated Fe or Al that was in the soil. This study provides the first compound-specific information about how natural polyphenols interact with metals in the environment. We propose a model that is applicable to developing phytochelation agents for metal detoxification, and we discuss how tannins may play a role in metal mobilization from soils.     

Emission and Performance Characteristics of a 2 Litre Toyota Diesel Van Operating on Esterified Waste Cooking Oil and Mineral Diesel Fuel

Exhaust emission and performance characteristics were evaluated in a Toyota van, powered by a 21 indirect injection (IDI) naturally aspirated diesel engine, operating on vegetable based waste cooking oil methyl ester (WCOME).Tests were performed on a chassis dynamometer and the data were compared with previous results conducted on the same vehicle using mineral diesel fuel. The data obtained includes smoke opacity, carbon monoxide (CO), carbon dioxide (CO₂), oxygen (O₂), nitrogen dioxide (NO₂), nitric oxide (NO), sulfur dioxide (SO₂) and brake power. Engine lubricating oil samples were also taken. Results from this study indicated a difference of approximately 9% in brake power between the two fuels. WCOME developed a significant lower smoke opacity level and reduced CO, CO₂, SO₂ emissions. However, O₂, NO₂ and NO levels were higher with the vegetable oil based fuel. Power values were comparable for both fuels. Lubricating oil analysis gave little change of viscosity and wear metal concentrations after 2887km were: Silicon 35ppm, Chromium 3.3ppm, Iron 33.8ppm, Copper 14.1ppm and lead 78.6ppm.     

Dignity and the right of internally displaced adolescents in Colombia to sexual and reproductive health

In Colombia, national policies and laws on the protection of vulnerable populations pay specific attention to the sexual and reproductive health needs and rights of internally displaced adolescents. This paper describes how a United Nations Population Fund (UNFPA)-supported programme (September 2000-August 2004) on the sexual and reproductive health of internally displaced adolescents contributed to restoring their dignity as a precursor to promoting their sexual and reproductive health rights. Different forms of the arts were used as basic techniques to discover their body and to provide sexual and reproductive health information and education. The arts were found to play a key role in restoring their dignity. Although dignity appeared to be a determinant of greater awareness of rights, it did not lead to increased empowerment with regard to rights. The availability of and access to sexual and reproductive health services remains a problem and displaced populations continue to have little or no power to hold their authorities accountable.     

Peak to Mean Pollutant Concentration Ratios for Various Terrain and Vegetation Cover

Many of the new particle sizing instruments utilize light scattering principles to detect and size aerosolparticles. The sensitivity of such nstruments is quite good, although extensive light shielding and focusingmethods must be used. A visible He-Ne gas laser cavity with its low gain is very sensitive to disturbances in its optical cavity and so may provide a new particle sizing approach.