Protection from steam at high pressures: development of a test device and protocol.

Extensive use of pressurized steam in the oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed and evaluated. Several factors were considered while designing the test device to simulate work site conditions. Fabrics were exposed to steam at 2 distances (50 and 100 mm) and 2 pressures (207 and 69 kPa). Theoretical considerations included heat and mass transfer, and fabric structure and performance properties. The test device and procedure differentiated well among both fabrics and exposure conditions. For all fabrics, maximum heat transfer was observed at highest steam pressure and shortest distance. Laminated and coated fabrics performed better than a fabric without such treatments.     

The issue of sustainability and disclosure. A case study of selective garbage collection by the Urban Cleaning Service of the city of Rio de Janeiro, Brazil - COMLURB

The Urban Cleaning Company of the City of Rio de Janeiro - COMLURB launched the Recycling Separation Center Project (Projeto Central de Separação de Recicláveis or CSR) in 2003. The objectives of the project were the adequate disposal of solid urban waste as well as the generation of employment and income. The COMLURB Project had economic, environmental and social facets, and the researchers sought to establish whether COMLURB had prepared reports that would enable evaluation of the investment made and the results obtained. In particular, the researchers sought to establish whether COMLURB financial statements set out the results of actions inherent to the CSR. We concluded from our analysis of the Project that the three elements of sustainability (social, environmental and economic), despite being fully present, were not adequately demonstrated. This study therefore proposes a model report with a view to enabling various information users to evaluate the results of the CSR Project.     

Adsorption behavior of α -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α -cypermethrin [R)-α -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (q_m) (303 μg/g); followed by GAC (186 μ g/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α -cypermethrin adsorption phenomena on GAC, while α -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α -cypermethrin from water.     

Promoting the use of environmental data collected by concerned citizens through information and communication technologies

Public participation within environmental monitoring may contribute to increasing the knowledge on the state of the environment at the same time it promotes citizens' involvement in environmental protection. However, the use of voluntary collected data is limited due to a lack of confidence in data collection procedures. Additionally, data quality is often unknown and the data are usually dispersed and non-structured. Information and communication technologies (ICT) may promote the use of voluntary collected data through the development of a collaborative system that incorporates tools and methodologies to facilitate data collection, access and validation. Furthermore, the use of ICT may promote public involvement within environmental monitoring, since it facilitates communication among all the stakeholders. This paper analyses the role of ICT in developing a system for environmental collaborative monitoring intending to promote the use of volunteer collected data. It starts by analysing the role of volunteers within environmental monitoring and continues analysing the potential of ICT to take advantage of the benefits of using data collected by citizens. A collaborative system that allows the public to express its knowledge on the state of the environment is described. Special emphasis is given to tools that explore non-traditional types of environmental data such as images, sounds and videos in association with spatial information. To illustrate the above mentioned concepts, a case study for beach quality monitoring developed within the Senses@Watch project, is described.     

137Cs in marine samples from the Brazilian southeastern coastal region

The present work presents the results of ¹³⁷Cs concentration in seawater, fish and sediments samples collect in 11 sampling points, crossing the Brazilian Southeastern coastal region, from Vitória (ES) to Santos (SP), on a routine basis from 1997 to 2002. This monitoring program was carried out by the Instituto de Radioproteção e Dosimetria (IRD/CNEN/MCT), in cooperation with the Instituto de Estudos do Mar Almirante Paulo Moreira (IEAPM/Brazilian Navy), aiming at determining artificial radionuclides in marine samples. Additionally to the ¹³⁷Cs results, ⁹⁰Sr concentrations in fish samples from 1998 to 2002 are also reported.The ¹³⁷Cs in seawater follows a lognormal distribution, with a geometric mean of 1.8 Bq m^-3 and a geometric standard deviation of 1.4 (n=54), decay corrected to June/2002. For ¹³⁷Cs levels in fish samples a geometric mean of 0.19 Bq kg⁻¹ and a geometric standard deviation of 2.9 (n=39), decay corrected to June/2002, with a range of 0.03 to 1.7 Bq kg⁻¹, were obtained. Based on the ¹³⁷Cs mean concentration in fish as well as in seawater, a transfer factor of 1 × 10² was calculated, which is quite in agreement with the recommended value found in the Safety Report Serie 19.     

Problems and constraints in Philippine municipal fisheries: The case of San Miguel Bay,Camarines Sur

The Philippine fisheries accounted for 3.7% of the gross national product at current prices. The sector employed about 990,872 persons. Of the divisions comprising the industry, municipal fisheries continued to contribute the largest share of fish production. However, the sector is beset with problems, many of which are best examplified by the case of San Miguel Bay (SMB). This paper presents the problems and constraints confronting SMB, a common property resource. This bay's open access condition has led to various problems, such as declining fishery resources, depressed socioeconomic conditions, illegal fishing, increasing population, and conflict among resource users. A poor marketing system, low level of fishing technology, fishermen's noncompliance and authorities' lax enforcement of rules and regulations, as well as lack of alternative sources of income further characterize the condition in SMB. Establishment of fishing rights, improvement of the marketing system, provision of alternative sources of income, and improvement of fishing technology were some of the solutions suggested. One major constraint, however, is financial, Comanagement complemented with other management tools has been proposed in addressing the problems in SMB.     

AN ANTIDEGRADATION POLICY FOR PRESERVING SURFACE WATER QUALITY IN FLORIDA1

ABSTRACT: As part of its overall system for protecting aquatic systems from unnecessary degradation, the State of Florida provides special protection for water bodies of unusual importance. Such water bodies are designated as “Outstanding Florida Waters” (OFW5). New discharges to OFWs are possible only if certain stringent criteria are met. A new point source direct discharge to an OFW is usually not allowed if it would cause any lowering of ambient water quality. A new indirect discharge (upstream from an OFW boundary) may be allowed only if it would not significantly degrade the OFW. To date, the advantages of the OFW system have clearly outweighed the disadvantages, and OFW designations are helping to protect Florida's most valuable waters from additional degradation. Florida's system could be a useful model for other jurisdictions wanting to provide special protection to special water bodies.