A Comparison of Measured and Simulated Ozone Concentrations in the Rural Areas of the Eastern United States during Summer 1995

ABSTRACT

The recent regulatory actions toward a longer-term (i.e., 8-hr) average ozone standard have brought forth the potential for many rural areas in the eastern United States to be in noncompliance. However, since a majority of these rural areas have generally few sources of anthropogenic emissions, the measured ozone levels primarily reflect the effects of the transport of ozone and its precursor pollutants and natural emissions. While photochemical grid models have been applied to urban areas to develop ozone mitigation measures, these efforts have been limited to high ozone episode events only and do not adequately cover rural regions. In this study, we applied a photochemical modeling system, RAMS/UAM-V, to the eastern United States from June 1-August 31, 1995. The purpose of the study is to examine the predictive ability of the modeling system at rural monitoring stations that are part of the Clean Air Status Trends Network (CASTNet) and the Gaseous Pollutant Monitoring Program (GPMP).

The results show that the measured daily 1-hr ozone maxima and the seasonal average of the daily 1-hr ozone maxima are in better agreement with the predictions of the modeling system than those for the daily 8-hr ozone maxima. Also, the response of the modeling system in reproducing the measured range of ozone levels over the diurnal cycle is poor, suggesting the need for improvement in the treatment of the physical and chemical processes of the modeling system during the nighttime and morning hours if it is to be used to address the 8-hr ozone standard.     

Evaluation of bactericidal efficacy of silver ions on Escherichia coli for drinking water disinfection

Purpose

The purpose of this study is the development of a suitable process for the disinfection of drinking water by evaluating bactericidal efficacy of silver ions from silver electrodes.

Methods

A prototype of a silver ioniser with silver electrodes and control unit has been fabricated. Silver ions from silver electrodes in water samples were estimated with an atomic absorption spectrophotometer. A fresh culture of Escherichia coli (1.75?×?10³ c.f.u./ml) was exposed to 1, 2, 5, 10 and 20?ppb of silver ions in 100?ml of autoclaved tap water for 60?min. The effect of different pH and temperatures on bactericidal efficacy was observed at constant silver ion concentration (5?ppb) and contact time of 30?min.

Results

The maximum bactericidal activity (100%) was observed at 20?ppb of silver ion concentration indicating total disinfection after 20?min while minimum bactericidal activity (25%) was observed after 10?min at 01?ppb of silver ions. Likewise, 100% bactericidal activity was noticed with 2, 5 and 10?ppb of silver ions after 60, 50 and 40?min, respectively. Bactericidal activity at pH?5, 6, 7, 8 and 9 was observed at 79.9%, 79.8%, 80.5%, 100% and 100%, respectively, whereas it was 80.4%, 88.3%, 100%, 100% and 100% at 10°C, 20°C, 30°C, 40°C and 50°C, respectively.

Conclusion

The findings of this study revealed that very low concentrations of silver ions at pH?8?C9 and temperature >20°C have bactericidal efficacy for total disinfection of drinking water. Silver ionisation is suitable for water disinfection and an appropriate alternative to chlorination which forms carcinogenic disinfection by-products.     

Studies on the development and characterization of bioplastic film from the red seaweed (Kappaphycus alvarezii)

Environmental Science and Pollution Research - Seaweeds rich in polysaccharides are considered commercially important because of their wide range of industrial applications. In this study, the red...     

Gaining forests but losing ground: A GIS evaluation in a Himalayan watershed

GIS overlay techniques were used to provide a quantitative historic documentation of deforestation and land-use dynamics in the Middle Mountains of Nepal between 1947 and 1990. Deforestation was most critical in the 1960s, but active afforestation programs in the 1980s have reversed the process. In spite of these trends, the degradation problem is more complex. The GIS evaluation showed that 86% of the recently afforested land is now under pine plantations located primarily at lower elevations and moderately steep slopes. In contrast, rainfed agricultural expansion is most pronounced on acidic soils and steeper, upper elevation sites, suggesting marginalization of agriculture. Agricultural expansion coupled with major losses of grazing land to pine forests are the key processes pointing towards major animal feed deficits. An alternative animal feed source is suggested through GIS using a topographically based microclimatic classification to generate a tree-planting map where the optimum ecological conditions for selective native fodder tree species are identified.     

Effects of sheep and goat grazing on the species diversity in the alpine meadows of Western Himalaya

This paper deals with effects of sheep and goat grazing on plant species diversity, species richness and species composition in two important conservation areas of the Western Himalaya; the Valley of Flowers (VOF) National Park and the Great Himalayan National Park (GHNP). The VOF is a completely Protected Area as it is devoid of livestock grazing whereas, 20,000 sheep and goats annually graze in GHNP. Both the National Parks possess sub-alpine and alpine vegetation that is distributed in 13 major habitat types. Present investigations indicate that all the habitat types in VOF are higher in plant species diversity and richness compared to habitat types in GHNP. Similarly, all three eco-climatic zones in VOF are higher in species diversity and richness compared to GHNP. Species diversity also decreases with increasing altitude in both the National Parks. The findings of this study are discussed in the light of the management and conservation of alpine meadows of the Western Himalayas.     

Biosorption of arsenic from aqueous solution using dye waste

The purpose of this study is to examine on removal of arsenic from water by biosorption through potential application of herbal dye wastes. Four different flower dye residues (after extraction of natural dye) viz. Hibiscus rosasinensis, Rosa rosa, Tagetes erecta, and Canna indica were utilized successfully for the removal of arsenic from aqueous solution. Batch studies were carried out for various parameters viz. pH, sorbent dose, contact time, initial metal ion concentration, and temperature. Data were utilized for isothermal, kinetic, and thermodynamic studies. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDAX), and Fourier transform infrared (FTIR) analyses of biomass were performed. The results showed that 1 g/100 ml for 5.0–5.5 h contact time at pH 6.0–7.5 with agitation rate 150 rpm provided 98, 96, 92, and 85 % maximum absorption of arsenic by R. rosa, H. rosasinensis, T. erecta, and C. indica, respectively, at initial concentration of 500 ppb. Data followed Langmuir isotherm showing sorption to be monolayer on heterogeneous surface of biosorbent. Negative values of ΔG° indicated spontaneous nature, whereas ΔH° indicates exothermic nature of system followed by pseudo-first-order adsorption kinetics. FTIR results showed apparent changes in functional group regions after metal chelation. SEM and EDAX analyses showed the changes in surface morphology of all test biosorbents. Herbal dye wastes, used as biosorbent, exhibited significant (85–98 %) removal of arsenic from aqueous solution. Hence, these biosorbents are cost-effective, easily available, eco-friendly, and comparatively more effective than other biosorbents already in use. These may be used to remove arsenic and other toxic metals from water.     

Bioefficacy of iprodione against two desapers, its compatibility with T. harzianum and residues on cabbage crop

Iprodione (3-(3,5-dichlorophenyl)-N-isopropyl-2,4-dioxoimidazolidine-1-carboxamide) bio-assayed against fungi Alternaria brassicicola and Sclerotinia sclerotiorum was found to be highly effective for inhibiting these desapers. Inhibition of A. brassicicola was 100% up to the dose of 75 ppm and for S. sclerotiorum there was 50% inhibition for the same concentration. Formulation of the pesticide was applied @ 500 and 1000 g. a.i./ha on the cabbage crop grown in the fields. Residues in the edible sample of cabbage were analyzed by gas choromatography for the fungicide and its metabolites. The dissipation of residues of the fungicide and its bio-efficacy against two fungi are presented. It dissipated from 3.72 to 0.072 microg/g on cabbage head by 15 days after treatment. The EC50 values of iprodione were found to be 11.5 ppm and 79.4 ppm for A. brassicicola and S. sclerotiorum, respectively. Half-life of iprodione was found to be 3 days for both cabbage head and leaves. The compatibility of the fungicide with a bio agent, T. harzianum was also studied and these two were not found to be compatible.     

An assessment of the sensitivity and reliability of the relative reduction factor approach in the development of 8-hr ozone attainment plans

The updated regulatory framework for demonstrating that future 8-hr ozone (O3) design values will be at or below the National Ambient Air Quality Standards (NAAQS) provides guidelines for the development of a State Implementation Plan (SIP) that includes methods based on photochemical modeling and analytical techniques. One of the suggested approaches is the relative reduction factor (RRF) for estimating the efficacy of emission reductions. In this study, the sensitivity of model-predicted responses towards emission reductions to the choice of meteorology and chemical mechanisms was examined. While the different modeling simulations generally were found to be in agreement on whether predicted future-year design values would be above or below the NAAQS for 8-hr O3 at a majority of the monitoring locations in the eastern United States, differences existed for a small percentage of monitors (approximately 6.4%). Another issue investigated was the ability of the attainment demonstration procedure to predict changes in monitored O3 design values. A retrospective analysis was performed by comparing predicted O3 design values from model simulations using emission estimates for 1996 and 2001 with monitored O3 design values for 2001. Results indicated that an average gross error of approximately 5 ppb was present between modeled and observed design values and that, at approximately 27% of all sites, model-predicted and observed design values disagreed as to whether the design value was above or below the NAAQS. Retrospective analyses such as the one presented in this study can provide valuable insights into the strengths and limitations of modeling and analysis techniques used to predict future design values over time periods of a decade or more for the purpose of developing SIPs. Furthermore, such analyses could provide avenues for improvement and added confidence in the use of the RRF approach for addressing attainment of the NAAQS.     

Evaluation of the presence-absence (P-A) test: A simplified bacteriological test for detecting coliforms in rural drinking water of India

One thousand three-hundred and ninety-four drinking water sources comprising ground water, surface water and piped supplies were tested in order to compare the presence-absence (P-A) test with standard MPN method to detect coliforms as indicators of water quality. Out of 1394 samples, 1074 (77.04%) and 1030 (74.88%) were positive by the MPN and P-A test, respectively. The P-A test detected 96% of the positives detected by the MPN test. The P-A test may be effectively used as a rapid screening method to detect coliform contamination in less polluted sources such as ground water and piped supplies.     

Potability of water sources in relation to metal and bacterial contamination in some northern and north-eastern districts of India

A total of 1094 water samples from 326 springs, 207 streams, 183 dug wells, 151 piped supplies, 90 tube wells, 75 hand pumps, 60 rivers and 2 lakes were collected from eight northern and six north-eastern districts of India. Samples were analysed to assess their potability by estimating the level of heavy metals and bacterial (coliform and faecal coliform) contaminations. Iron was found in a maximum number (53%) of water samples from hand pumps, followed by lead in 43% of the tube wells, chromium in 16% of dug wells, cadmium in 13% of streams and manganese in 7% of hand pumps above their maximum admissible concentrations (MACs). Maximum metal pollution has been observed in a considerable number of water samples from Doda, followed by Almora, Mirzapur and Bankura. Hand pump water samples exhibited maximum metal pollution followed by dug well, spring, stream and river water samples. Contamination of coliform and/or faecal coliform bacteria ranged between 41% and 67% of water samples from open water sources but it was also less, i.e. 6–15% of water samples from tube wells and hand pumps. In general, 42–85% of water samples from districts surveyed, except from Jammu (18%) and Mirzapur (27%), were found to be bacteriologically unsatisfactory. Since toxic metals and pathogenic bacteria pose a risk to public health, monitoring of drinking water sources is required.