Relating characteristics of global biodiversity targets to reported progress

To inform governmental discussions on the nature of a revised Strategic Plan for Biodiversity of the Convention on Biological Diversity (CBD), we reviewed the relevant literature and assessed the framing of the 20 Aichi Biodiversity Targets in the current strategic plan. We asked international experts from nongovernmental organizations, academia, government agencies, international organizations, research institutes, and the CBD to score the Aichi Targets and their constituent elements against a set of specific, measurable, ambitious, realistic, unambiguous, scalable, and comprehensive criteria (SMART based, excluding time bound because all targets are bound to 2015 or 2020). We then investigated the relationship between these expert scores and reported progress toward the target elements by using the findings from 2 global progress assessments (Global Biodiversity Outlook and the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services). We analyzed the data with ordinal logistic regressions. We found significant positive relationships (p < 0.05) between progress and the extent to which the target elements were perceived to be measurable, realistic, unambiguous, and scalable. There was some evidence of a relationship between progress and specificity of the target elements, but no relationship between progress and ambition. We are the first to show associations between progress and the extent to which the Aichi Targets meet certain SMART criteria. As negotiations around the post-2020 biodiversity framework proceed, decision makers should strive to ensure that new or revised targets are effectively structured and clearly worded to allow the translation of targets into actionable policies that can be successfully implemented nationally, regionally, and globally.     

Underestimation of phosphorus fraction change in the supernatant after phosphorus adsorption onto iron oxides and iron oxide–natural organic matter complexes

The phosphorus(P) fraction distribution and formation mechanism in the supernatant after P adsorption onto iron oxides and iron oxide-humic acid(HA) complexes were analyzed using the ultrafiltration method in this study.With an initial P concentration of 20 mg/L(I =0.01 mol/L and pH = 7),it was shown that the colloid(1 kDa-0.45 μm) component of P accounted for 10.6%,11.6%,6.5%,and 4.0%of remaining total P concentration in the supernatant after P adsorption onto ferrihydrite(FH),goethite(GE),ferrihydrite-humic acid complex(FH-HA),goethite-humic acid complex(GE-HA),respectively.The 1 kDa component of P was still the predominant fraction in the supernatant,and underestimated colloidal P accounted for 2.2%,55.1%,45.5%,and 38.7%of P adsorption onto the solid surface of FH,FH-HA,GE and GE-HA,respectively.Thus,the colloid P could not be neglected.Notably,it could be interpreted that Fe~(3+) hydrolysis from the adsorbents followed by the formation of colloidal hydrous ferric oxide aggregates was the main mechanism for the formation of the colloid P in the supernatant.And colloidal adsorbent particles co-existing in the supernatant were another important reason for it.Additionally,dissolve organic matter dissolved from iron oxide-HA complexes could occupy large adsorption sites of colloidal iron causing less colloid P in the supernatant.Ultimately,we believe that the findings can provide a new way to deeply interpret the geochemical cycling of P,even when considering other contaminants such as organic pollutants,heavy metal ions,and arsenate at the sediment/soil-water interface in the real environment.     

Enhancement of conservation knowledge through increased access to botanical information

Herbarium specimens are increasingly recognized as an important resource for conservation science and virtual herbaria are making specimens freely available to a wider range of users than ever before. Few virtual herbaria are designed with conservation use as a primary driver. Exceptionally, Brazil's Reflora Virtual Herbarium (RVH) was created to increase knowledge and conservation of the Brazilian flora. The RVH is closely integrated with the Flora of Brazil 2020 platform on which Brazil's new national Flora is under construction. Both resources are accessible via the Reflora home page and thousands of users move seamlessly between these Reflora resources. To understand how the Reflora resources are currently used and their impact on conservation science, we conducted a literature review and an online survey. We searched for publications of studies in which Reflora resources were used and publications resulting from Brazilian researchers who were part of Reflora's research and mobility program. The survey contained multiple choice questions and questions that required a written response. We targeted Reflora webpage visitors with the survey to capture a wider range of Reflora users than the literature review. Reflora resources were used for a variety of conservation-relevant purposes. Half the 806 scientific publications in which Reflora was cited and 81% of the 1069 survey respondents accessing Reflora resources mentioned conservation-relevant research outputs. Most conservation-relevant uses of the Reflora resources in scientific publications were research rather than implementation focused. The survey of Reflora users showed conservation uses and impacts of virtual herbaria were more numerous and diverse than the uses captured in the literature review. Virtual herbaria are vital resources for conservation science, but they must document use and impacts more comprehensively to ensure sustainability.     

Historical trends of trace metals in a sediment core from a contaminated tidal salt marsh in San Francisco Bay

Sedimentation of metals preserves historical records of contaminant input from local and regional sources, and measurement of metals in sediment cores can provide information for reconstruction of historical changes in regional water and sediment quality. Sediment core was collected from Stege Marsh located in central San Francisco Bay (California, USA) to investigate the historical input of trace metals. Aluminum-normalized enrichment factors indicate that inputs from anthropogenic sources were predominant over natural input for Ag, Cu, Pb, and Zn. Among these, lead was the most anthropogenically impacted metal with enrichment factors ranging from 32 to 108. Depth profiles and coefficients of variation show that As, Cd, and Se were also influenced by anthropogenic input. The levels of these anthropogenically impacted metals decline gradually towards the surface due to regulation of the use of leaded gasoline, municipal and industrial wastewater discharge control, and closure of point sources on the upland of Stege Marsh. Although trace metal contamination is expected to be continuously declining, the rates of decline have slowed down. For lead, it is estimated to take 44, 82, and 153 years to decrease to probable effects level (112 μg/g), the San Francisco Bay ambient surface sediment level (43.2 μg/g), and the local baseline levels (5 μg/g), respectively. Some metals in surface sediments (0–6 cm) are still higher than sediment quality guidelines such as the probable effects level. To further facilitate the recovery of sediment quality, more efficient management plans need to be developed and implemented to control trace metals from non-point sources such as stormwater runoff.     

Clean Air Corridors: A Geographic and

Meteorological factors, pollutant emissions, and geographic regions related to transport of low optical extinction coefficient air to Grand Canyon National Park were examined. Back trajectories were generated by two models, the Atmospheric Transport and Dispersion Model (ATAD) and an approach using the Nested Grid Model output for a Lagrangian particle transport model (NGM/ CAPITA). Meteorological information along the trajectories was analyzed for its relationship to visibility at the Grand Canyon. Case studies considered days with anomalously clean air from the southwest and dirty air from the northwest. Clean air was most frequently from the north and northwest, rarely from the south. Low emissions, high ventilation and washout by precipitation was associated with clean air. All clean days with transport from the Los Angeles area had upper-level low pressure over the region with high ventilation and usually abundant precipitation. The dirtiest days with transport from the northwest were affected by forest fires.     

“十四五”推动绿色消费和生活方式的政策研究

当前,中国消费规模持续快速扩张,居民消费已从温饱向小康转型升级,消费对中国经济增长的贡献率快速提升,成为驱动经济增长的重要引擎。前期研究表明,消费领域的绿色转型有助于引导和倒逼生产的绿色化,促进形成绿色生产生活方式,带动公众积极践行绿色理念,改善社会绿色转型的治理体系,将对中国整体绿色转型和高质量发展发挥决定性作用。在此基础上,本文研究提出了中国“十四五”时期推动绿色消费的总体目标、指标体系和重点领域,认为中国政府应将绿色消费放在更加突出的战略位置,通过“十四五”规划全面推动相关实践,按照供给侧与需求侧共同发力、激励约束并举、政府企业消费者共建共治共享的原则,构建绿色消费政策体系,并针对建筑、汽车、电力、物流等重点行业提出了具体的政策建议。     

Photochemical transformations of tetrabromobisphenol A and related phenols in water

A method was developed for studies of the phototransformation at UV irradiation of aqueous solutions of tetrabromobisphenol A (TBBPA), tribromobisphenol A (TriBBPA), tetrachlorobisphenol A (TCBPA), 2,4-dichlorophenol at various pHs as well as 2-chlorophenol, 2-bromophenol, 3,4-dichlorophenol and bisphenol A at pH 11. The absorbance spectra of the compounds and the emission spectra of the light-source were determined and used to calculate disappearance quantum yields of the photochemical reactions that were taking place. No major differences between the disappearance quantum yields of TBBPA and TCBPA were observed at pH 10, while the disappearance quantum yield of TriBBPA was approximately two times higher. The rate of decomposition of TBBPA was six times higher at pH 8 than at pH 6. Identification of the degradation products of TBBPA and TriBBPA, by GC-MS analysis and by comparison to synthesised reference compounds, indicated that TBBPA and TriBBPA decompose via different mechanisms. Three isopropylphenol derivatives; 4-isopropyl-2,6-dibromophenol, 4-isopropylene-2,6-dibromophenol and 4-(2-hydroxyisopropyl)-2,6-dibromophenol, were identified as major degradation products of TBBPA while the major degradation product of TriBBPA was tentatively identified as 2-(2,4-cyclopentadienyl)-2-(3,5-dibromo-4-hydroxyphenyl)propane.     

Geo-environmental hazards assessment of the north western Gulf of Suez,Egypt

The aim of the present study is to assess the present geo-environmental hazards, both flash flooding and seismic activity in the western part of Gulf of Suez. Assessment includes the analysis of satellite images, topographical, geological and other ancillary geological data using GIS technology. GIS data integration and analysis, including morphometric, local seismic activity and structural data analysis indicated that the area is under threat from two types of geo-hazards. Morphometric analysis strongly supported the high probability of flash flooding in different sites within the study area. The structural lineaments, extracted from an enhanced ETM+7 image, showed that the majority of seismic activity is related to segments of the fault system of the Gulf of Suez and the Gulf of Aqaba. The seismic activity hazard was taken into consideration through the identification of the sources of events. Seismic activity in the study area markedly increases from north to south. The distribution of the seismic activity pattern and data analysis for the study area clearly exhibits the urgent need for an assessment and rehabilitation program to mitigate geo-hazard along the existing structures.     

Artificial lightweight aggregates as utilization for future ashes - A case study

In the future, more electricity in the Netherlands will be produced using coal with co-combustion. Due to this, the generated annual ash volume will increase and the chemical composition will be influenced. One of the options for utilization if present markets are saturated and for use of fly ashes with different compositions, is as raw material for lightweight aggregates. This was selected as one of the best utilizations options regarding potential ash volume to be applied, environmental aspects and status of technology. Because of this, a study has been performed to assess the potential utilization of fly ash for the production of lightweight aggregate. Lightweight aggregate has been produced in a laboratory scale rotary kiln. The raw material consisted of class F fly ash with high free lime content. An addition of 8% clay was necessary to get green pellets with sufficient green strength. The basic properties of the produced lightweight aggregate and its behaviour in concrete have been investigated. The concrete has a good compressive strength and its leaching behaviour meets the most stringent requirements of Dutch environmental regulations. The carbon foot print of concrete will be negatively influenced if only the concrete itself is taken into account, but the reduction of the volume weight has advantages regarding design, transport emissions and isolation properties which may counteract this. In the Dutch situation the operational costs are higher than expected potential selling price for the LWA, which implies that the gate fee for the fly ash is negative.