Precipitation composition and wet deposition temporal pattern in Central Serbia for the period from 1998 to 2004

Bulk samples collected on a daily basis at three principal meteorological stations in central Serbia were analyzed on chloride (Cl(-)), nitrate [Formula: see text], sulfate [Formula: see text], sodium (Na(+)), ammonium [Formula: see text], potassium (K(+)), calcium (Ca(2+)), and magnesium (Mg(2+)) in addition to precipitation amount, pH and conductivity measurements over the period 1998-2004. The data were subjected to variety of analyses (linear regression, principal component analysis, time series analysis) to characterize precipitation chemistry in the study area. The most abundant ion was [Formula: see text] with annual volume weighted mean concentration of 242 microeq L(-1). Neutralization of precipitation acidity occurs both as a result of the dissolution of alkaline compounds containing Ca(2+), Mg(2+), and K(+) as well as the absorption of ammonia. The ratio of [Formula: see text] was above 5, which indicated that the combustion process of low-grade domestic lignite for electricity generation from coal-fired thermal power plants was the main source of pollution in the investigated area. A considerable mean annual bulk wet deposition of SO(4)-S determined by precipitation amount and concentrations of sulfate in the precipitation was calculated to be 12-35 kg ha(-1).     

Heavy metal concentration in fish tissues inhabiting waters of “Buško Blato” reservoar (Bosnia and Herzegovina)

Heavy metals concentration (mercury, lead, cadmium, arsenic, copper, zinc and chromium) in tissues (muscles, liver, kidney and gonads) of Dalmatian barbelgudgeon, the nase, the souffie and brown trout, inhabiting waters of Busko Blato reservoir in Bosnia and Herzegovina, has been determined by atomic absorption spectrophotometry. The meat of the tested fish sorts does not contain elevated concentration of most analyzed heavy metals with exception of lead (higher than MAC in Italy, Germany and Denmark) and mercury (in muscles of brown trout higher than MAC in most countries). The lowest level of all heavy metals is always detected in gonads, with higher values in fry compared to milt for copper, zinc, chromium and arsenic. The highest copper concentration is observed in the liver from the souffie which is suggested as a suitable biomonitor for copper intoxication. In muscles of all fish sorts, lead was always present in much higher concentration than cadmium, while in kidneys of most fish sorts, lead and cadmium concentrations were similar. We showed that bioaccumulation of some heavy metals in the fish sorts analyzed is tissue and sex dependent. Also, we concluded that the small water exchange in reversible shallow reservoir does not induce elevated concentration of heavy metals in fish tissues inhabiting Busko Blato.     

The relationship between whole effluent toxicity (WET) and chemical-based effluent quality assessment in Vojvodina (Serbia)

The relationship between whole effluent toxicity (WET) and chemical-based effluent quality assessment across a range of effluent types was examined for the first time in Serbia. WET was determined by Daphnia magna acute tests, while chemical-based toxicity was taken as theoretical for concentrations of priority chemicals and effluent quality assessment based on the valid Serbian regulations. A poor correlation was found between WET and chemical-based effluent quality assessment: positive toxicity tests were found, in general, in cases where samples satisfied the requirements of mandatory effluent monitoring. Statistically insignificant correlation between the predicted and observed toxicity indicated that the presence of priority substances accounted to the overall toxicity only to a certain degree, most probably due to a rather short list of priority pollutants regularly analysed in effluents. Current monitoring requirements neglect hazards that derive from potentially present toxicants and unpredictable toxicity of complex mixtures, which led to poor correlation between the WET and chemical-based results in this study.     

A complex investigation of the extent of pollution in sediments of the Sava River. Part 1: Selected elements

The Sava River is the biggest tributary to the Danube River. As a part of the 6th FW EU project, Sava River Basin: Sustainable Use, Management and Protection of Resources (SARIB), ecological status of sediments was investigated. In order to assess the geographical distribution in sediment contamination of the Sava River, inorganic and persistent organic pollutants were analyzed in sediments at 20 selected sampling sites along the Sava River from its spring to its outfall into the Danube River. For comparability of data to other river basins the sediment fraction below 63 μm was studied. Due to complexity of the work performed, the results are published separately (“Part I: Selected elements” and “Part II: Persistent organic pollutants”). In the present study, the extent of pollution was estimated by determination of the total element concentrations and by the identification of the most hazardous highly mobile element fractions and anthropogenic inputs of elements to sediments. To assess the mobile metal fraction extraction in 0.11 mol L^???1, acetic acid was performed (first step of the Community Bureau of Reference extraction procedure), while anthropogenic inputs of elements were estimated on the basis of normalization to aluminum (Al) concentration. According to the Water Framework Directive, the following elements were investigated in sediments: cadmium (Cd), lead (Pb), nickel (Ni), and mercury (Hg). Furthermore, copper (Cu), zinc (Zn), chromium (Cr), arsenic (As), and phosphorous (P) were determined. The analyses of sediments demonstrated slightly elevated values for Hg, Cr, and Ni in industrially exposed sites (concentrations up to 0.6, 380, and 210 mg kg^???1, respectively). However, the latter two elements exist in sparingly soluble forms and therefore do not represent an environmental burden. P concentrations were found in elevated concentrations at agricultural areas and big cities (up to 1,000 mg kg^???1).     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Speciation of mercury in the strongly polluted sediments of the Deûle River (France)

The De?le River in Northern France experienced serious contamination from the metallurgical industry, especially from the smelter Metaleurop prior to 2003. In 2002 the surface sediments were collected from the bed of the river around 10 km above and 10 km below the smelter. Total mercury (HgT) and methylmercury (MeHg) concentrations exceeded the background value of 0.1 mg kg(-1). The average concentrations were 19.67 ± 1.02 mg kg(-1) and 10.88 ± 1.08 μg kg(-1), respectively. In 2003 the sediment core samples were collected at two different sites near the factory for survey depth profiles of Hg contamination. The concentrations of HgT and MeHg in sediment cores varied from 10.47 to 259.44 mg kg(-1) and from 3.24 to 82.61 μg kg(-1), respectively. The concentration of total mercury was significantly correlated with the methylmercury concentration in the sediment below a depth of 23.5 cm (R(2) = 0.81, p < 0.01). This may suggest that the production of MeHg is directly related to the HgT concentration. Nevertheless the MeHg/HgT ratio in the upper part of the sediment core was higher than that in the lower part. This suggests that HgT and MeHg may have been co-deposited together. However, the methylmercury production takes place in the surface sediment by microorganisms. The strong correlation observed between MeHg and acid volatile sulfides (AVS) suggests that MeHg variability is associated with the bacterial activity (presence of AVS).     

Chemical dynamics of the Sava riverine system

Presented here is a study of the geochemical dynamics of the entire River Sava watershed, a major tributary of the River Danube which has not previously been investigated. The sampling was performed at 33 selected locations along the main channel of the stream and at its largest tributaries during three sampling seasons (fall 2005, spring 2006 and fall 2006), going from headwater locations to the mouth near the confluence with the Danube. Almost 80% of the solutes are derived from carbonate mineral weathering and represent over 50% of specific HCO(3)(-) flux normalized to unit basin area at the mouth of the Danube. Statistical analysis indicates that agricultural and industrial sources contribute significantly to increased Na(+), K(+), Cl(-), SO(4)(2-) and NO(3)(-) concentrations in tributary waters. Different processes control the water chemistry along the course of the Sava's drainage-the upper reaches are largely regulated by contributions from carbonate mineral weathering, the middle reaches are influenced by agricultural activity and biological processes related to eutrophication, while the lower reaches tend to have more pronounced parameters related to the industrial processing along with leakages from municipal sanitary systems of these higher population density areas.     

Edaphic factors affecting the vertical distribution of radionuclides in the different soil types of Belgrade, Serbia

The specific activities of natural radionuclides ((40)K, (226)Ra and (232)Th) and Chernobyl-derived (137)Cs were measured in soil profiles representing typical soil types of Belgrade (Serbia): chernozems, fluvisols, humic gleysols, eutric cambisols, vertisols and gleyic fluvisols. The influence of soil properties and content of stable elements on radionuclide distribution down the soil profiles (at 5 cm intervals up to 50 cm depth) was analysed. Correlation analysis identified associations of (40)K, (226)Ra and (137)Cs with fine-grained soil fractions. Significant positive correlations were found between (137)Cs specific activity and both organic matter content and cation exchange capacity. Saturated hydraulic conductivity and specific electrical conductivity were also positively correlated with the specific activity of (137)Cs. The strong positive correlations between (226)Ra and (232)Th specific activities and Fe and Mn indicate an association with oxides of these elements in soil. The correlations observed between (40)K and Cr, Ni, Pb and Zn and also between (137)Cs and Cd, Cr, Pb and Zn could be attributed to their common affinity for clay minerals. These results provide insight into the main factors that affect radionuclide migration in the soil, which contributes to knowledge about radionuclide behaviour in the environment and factors governing their mobility within terrestrial ecosystems.     

The determination of the extractability of selected elements from agricultural soil

Concentrations of Ag, Al, Ba, Cd, Co, Cr, Cu, Fe, K, Mn, Na, Ni, Pb, Sr, and Zn—isolated by sequential extraction steps from apple orchard soil—were analyzed by inductively coupled plasma-atomic emission spectroscopy and compared to the total amount of metal in soil determined by XRF. The extractable amount of each metal was calculated by the extraction yields of the four steps. The LODs of the different elements in all extracts ware below 3 μg/L except for Ba (steps 1 and 2), Cu (step 1), Fe (all steps), K (steps 1–3), Mn (step 2), Na (steps 1–3), Ni (step 1), Pb (steps 1 and 4), and Zn (steps 1 and 2). The highest LOD (>10 μg/L) was found for Fe, K, and Na (step 1). The recovery of all metals after four sequential extraction steps was 90–112%. The repeatability (<1.1%), the intermediate precision (<5.3%), the day-to-day reproducibility (<6.2%), and the overall uncertainty of measurement (approximately 4–8.5%) for all analyzed metals supports the choice of the method used.     

Photocatalytic reduction of carbon dioxide over Cu/TiO<Subscript>2</Subscript> photocatalysts

The photocatalytic reduction of CO₂ with H₂O was investigated using Cu/TiO₂ photocatalysts in aqueous solution. For this purpose, Cu/TiO₂ photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N₂ physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO₂ decreased in the presence of Cu/TiO₂ in comparison to pure TiO₂, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H₂ production necessary for CO₂ reduction more difficult.