Hydrogen, carbon and sulphur isotope ratios in peat: the role of diagenessis and water regimes in reconstruction of past climates

We demonstrate that carbon, hydrogen and sulphur isotope ratios both, in the total peat (¹³C_tp=–25.52 to –28.27, D_tp=–78.67 and –109.24, ³⁴S=4.35 to 19.87), and in cellulose from the peat (¹³C_nc=–25.06 to –27.33 and D_nc=–92.43 to –118.02) are not affected by postdepositional changes. Therefore, the original isotope composition of plants are in general preserved in the peat and represent an archive of the past environmental variations. These can be supported by (i) good correlations between ¹³C_tp and ¹³C_nc, and between D_tp and D_nc, (ii) high horizontal homogeneity of ¹³C_tp and ¹³C_nc in the scale of one peat-bog – the same major factor(s) control(s) C isotopic ratios, (iii) no correlation between organic sulphur concentrations and ³⁴S value –³⁴S results from variations in the water level.This revised version was published online January 2005 with corrections to the title.     

Acrylamide-induced alterations in lungs of mice in relation to oxidative stress indicators

The aim of the experiment was to study the influence of acrylamide (ACR) on major antioxidants in the lungs of Swiss mice. The experiment was conducted on male mice that were 8 weeks old. The mice were exposed to ACR at a single dose of 26 µg per animal, which was administered orally. Mice were anesthetized 3, 24, and 48 h after the ACR gavage. Next, histopathological and biochemical analyses of GSH concentration and the activities of SOD, GPx, and CAT were performed in the lungs. Animals exposed to ACR showed demonstrated symptoms of inflammation in lungs, hypertrophy of bronchiolar epithelium, and hyperplasia of alveolar epithelium. GSH concentration was significantly decreased 3 h after ACR gavage, which was followed by a significant increase 48 h after ACR gavage. Similarly, SOD and GPx demonstrated decreased activities 3 h after exposure to ACR, followed by increased activities 48 h after exposure to ACR. CAT activity was significantly increased 24 and 48 h after exposure to ACR. We conclude that oral exposure of mice to ACR results in alterations of lung microstructure, accompanied by the symptoms of redox imbalance.     

Verification of the "first flush" phenomenon in mine water from coal mines in the Upper Silesian Coal Basin, Poland

Case studies of Grodziec and Siersza mines in the Upper Silesian Coal Basin confirm that mine water accumulating in and over-flowing from abandoned coal mines is subject to a "first flush" phenomenon. The accumulated products of sulphide oxidation are dissolved in the rising mine water and flushed out at concentrations several times those observed during mine operation. Following the first overflow, sulphate concentration and hydrogen ion activity decay exponentially. In the case of workings in Siersza, decay constants of -0.003 to -0.005 day(-1) are observed, corresponding to flushing times of 480 to 820 days, some 10-20 times the period required for the workings to flood. Quantities of leachable sulphur in the abandoned workings of 0.02-0.03% are adequate to explain the observed concentrations of sulphate in the first flush, and this figure is tentatively supported by laboratory analyses.     

Catalytic destruction of 1,2-dichlorobenzene on V2O5-WO3/Al2O3-TiO2 catalyst

Studies on the catalytic destruction of 1,2-dichlorobenzene were carried out on a specially constructed semi-technical equipment whose most important element was a catalytic reactor with a monolithic catalyst in the form of 150 x 150 x 100 mm cubes. A catalyst made from cordierite with an active layer composed of Al2O3 - 64 wt%, TiO2 - 26 wt%, V2O5 - 6.6 wt% and WO3 - 3.4 wt% was used. The reactor made it possible to carry out the process in the temperature range 150-350 degrees C, at variable catalyst loading and different velocities of gas flow through the reactor. The content of 1,2-dichlorobenzene in the air was analysed by a chromatographic method. A significant effect of catalyst loading and temperature on 1,2-dichlorobenzene destruction efficiency was observed and no effect of the linear flow velocity through the catalyst on o-dichlorobenzene destruction efficiency was reported. The applied vanadium-tungsten catalyst on a monolithic carrier made from TiO2/gamma-Al2O3 revealed very good activity that resulted in an over 80% efficiency of 1,2-dichlorobenzene destruction at the temperature around 250 degrees C at a very high catalyst loading reaching ca. 8200 h(-1). Additionally, in this study the kinetics of 1,2-dichlorobenzene decomposition was determined, specifying the order of reaction and dependence of the decomposition rate constant on temperature, using a simple power-rate law model.     

Geographical location and key sensitivity issues of post-industrial regions in Europe

Primary objectives of our work were to spatially delineate post industrial areas of the EU-27 and indicate key environmental, social and economic sensitivity issues for these regions. The density of industrial sites within NUTS-x regions for EU-27 countries was assessed by using CORINE 2000 land cover layer. A development of postindustrial society in Europe represents a strong geographic diversity. There are distinct historical and current differences between regions which form major groups, comprising similar internal characteristics and definable trends in environmental and socioeconomic sense. Regions grouped into postindustrial clusters are fundamentally different from the European average, and are facing specific problems related to global market and political changes. Eastern postindustrial regions can be characterized as socially and economically weak, exhibiting high unemployment rate, low GDP, negative population growth and a strong environmental pressure, represented by a high density of dump sites. Most of the western EU postindustrial areas have been successfully recovered and moved into new economy as shown by most of the indicators. In urban postindustrial zones, however, emission sources of pollutants seem to continually be a major problem--not necessarily in terms of exceeding thresholds, but through a remarkable difference in the amount of pollutants produced relative to other regions.     

Geostatistical 3-dimensional integration of measurements of soil magnetic susceptibility

In soil magnetometry, two types of measurements are usually performed. The first type is measurements performed on the soil surface, frequently using an MS2D sensor. The second type includes measurements of magnetic susceptibility carried out in the soil profile, usually to a depth of about 30 cm. Up to now, such measurement results were analyzed separately. However, it is possible and advantageous to integrate these two types of measurements. The goal of the study was to integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. More specifically, the goal was to obtain 3-dimensional spatial distributions of magnetic susceptibility of the topsoil horizon. Results show that it is possible to effectively integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. Moreover, the 3-dimensional spatial distribution that is obtained shows the magnetic susceptibility of the top 20 cm of soil, which includes the soil horizons where most of the heavy metals are accumulated. The analysis of such a spatial distribution can be very helpful in delineating areas where the heightened magnetic susceptibility is a result of the influence of anthropogenic pollution from those areas where it results from lithogenic origin. It is possible to investigate where the volumes of soil with heightened magnetic susceptibility are located in the soil profile and in this way investigate which characteristic type of soil profile it is.     

Agricultural and non-agricultural directions of bio-based sewage sludge valorization by chemical conditioning

Environmental Science and Pollution Research - This literature review outlines the most important—agricultural and non-agricultural—types of sewage sludge management. The potential of...     

The application of bioassays as indicators of petroleum-contaminated soil remediation

Bioremediation has proven successful in numerous applications to petroleum contaminated soils. However, questions remain as to the efficiency of bioremediation in lowering long-term soil toxicity. In the present study, the bioassays Spirotox, Microtox, Ostracodtoxkit F, umu-test with S-9 activation, and plant assays were applied, and compared to evaluate bioremediation processes in heavily petroleum contaminated soils. Six higher plant species (Secale cereale L., Lactuca sativa L., Zea mays L., Lepidium sativum L., Triticum vulgare L., Brassica oleracea L.) were used for bioassay tests based on seed germination and root elongation. The ecotoxicological analyses were made in DMSO/H2O and DCM/DMSO soil extracts. Soils were tested from two biopiles at the Czechowice oil refinery, Poland, that have been subjected to different bioremediation applications. In biopile 1 the active or engineered bioremediation process lasted four years, while biopile 2 was treated passively or non-engineered for eight months. The test species demonstrated varying sensitivity to soils from both biopiles. The effects on test organisms exposed to biopile 2 soils were several times higher compared to those in biopile 1 soils, which correlated with the soil contaminants concentration. Soil hydrocarbon concentrations indeed decreased an average of 81% in biopile 1, whereas in biopile 2 TPH/TPOC concentrations only decreased by 30% after eight months of bioremediation. The bioassays were presented to be sensitive indicators of soil quality and can be used to evaluate the quality of bioremediated soil. The study encourages the need to combine the bioassays with chemical monitoring for evaluation of the bioremediation effectiveness and assessing of the contaminated/remediated soils.