Microstructures and electrochemical behaviors of the friction stir welding dissimilar weld

By using optical microscope, the microstructures of 5083/6082 friction stir welding (FSW) weld and parent materials were analyzed. Meanwhile, at ambient temperature and in 0.2 mol/L NaHS0₃ and 0.6 mol/L NaCl solutionby gravimetric test, potentiodynamic polarization curve test, electrochemical impedance spectra (EIS) and scanning electron microscope (SEM) observation, the electrochemical behavior of 5083/6082 friction stir welding weld and parent materials were comparatively investigated by gravimetric test, potentiodynamic polarization curve test, electrochemical impedance spectra (EIS) and scanning electron microscope (SEM) observation. The results indicated that at given processing parameters, the anti-corrosion property of the dissimilar weld was superior to those of the 5083 and 6082 parent materials.     

Expression of sulfur uptake assimilation-related genes in response to cadmium, bensulfuron-methyl and their co-contamination in rice roots

The responses of sulfur （S） uptake assimilation-related genes＇ expression in roots of two rice cultivars to cadmium （Cd）, bensulfuron-methyl （BSM） and their co-contamination （Cd＋BSM） were investigated by gene-chip microarray analysis and quantitative real-time PCR （QRT-PCR） technology. Treatments of Cd and Cd＋BSM induced expression of sulfate transporter and permease genes, and promoted sulfate uptake in rice roots. Cd＋BSM could alleviate Cd toxicity to cv. Fengmeizhan seedlings, probably due to Cd＋BSM promoting greater S absorption by seedlings. Cd and Cd＋BSM induced expression of sulfate assimilation-related genes, and thus activated the sulfur assimilation pathway. Cd and Cd＋BSM induced expression of phytochelatin synthase and metallothionein genes, and induced expression of glutathione S-transferases （GSTs）, glutathione synthase （GS） and S- containing antioxidation enzyme genes, which detoxified Cd2＋. It is suggested that （to cope with the toxicity of Cd, BSM and their co-contamination） the S uptake and assimilation pathway was activated in rice roots by increased expression of related genes, thus enhancing the supply of organic S for synthesis of Cd or BSM resistance-related substances.     

Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst

The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.     

饮用水源地的水华对人体健康风险评价

饮用水源地的水华现象近年来在世界各地不断爆发,给人类饮水安全造成极大的威胁。本文通过检测微囊藻毒素和三卤甲烷类物质,利用急性暴露安全阈值（浓度）计算模型,计算出了各自的急性暴露安全阅值,并对健康风险进行了评价。     

两种喹诺酮类抗生素对亚心形扁藻的毒性效应研究

研究了恩诺沙星和盐酸环丙沙星两种喹诺酮类抗生素对亚心形扁藻的毒理学效应。经多组不同浓度的两种抗生素处理后,分别对扁藻的96EC50、叶绿素和胞外聚合物（EPS）进行分析。结果表明,两种抗生素在低浓度时对扁藻生长具有促进作用,而在高浓度时体现抑制毒性作用。高浓度时,抗生素浓度越高对扁藻的生长、叶绿素和胞外聚合物抑制效果越明显,但当浓度达到一定高度后,抑制会达到其阈值。恩诺沙星和盐酸环丙沙星对扁藻的半生长抑制率分别为19.8 mg/L和28.7 mg/L。     

明矾石在水体微藻去除中的应用研究

以温州市某大学校区内富营养化水体为研究对象,采用本地明矾石对含藻水体进行混凝除藻、除浊实验研究,分别进行投加量、搅拌强度、搅拌时间、静置时间及pH值对微藻去除效率的影响研究,以获得处理工艺的最佳条件,为恢复河流水体生态自净功能提供理论基础.试验中对投加明矾石前后,水体中浊度、总磷、氨氮和总氮进行了测定,结果表明：明矾石最佳投加量为0.35 g/L,最佳搅拌方式为200 rpm搅拌4 min;最佳静置时间为25 min;在碱性或中性水体的处理效果尤佳.     

不同溶剂和反应温度对污泥热液化制取生物质油性质影响研究

选取4种溶剂(水、乙醇、正己烷、水-乙醇共溶济)作为污泥热液化制取生物质油的溶剂,分析溶剂种类和反应温度对热液化效果和生物质油性质的影响.结果表明:相同温度下,生物质油产率随溶剂种类变化趋势为:乙醇水-乙醇共溶剂正己烷水,最高产率为54.82%(乙醇溶剂,240℃).污泥有机物转化率随溶剂种类变化趋势为:水-乙醇共溶剂乙醇水正己烷,最高有机物转化率为96.40%(水-乙醇共溶剂,330℃).污泥经热液化处理后,碳、氢、氮、硫元素在生物质油中富集,氧含量下降,热值36 MJ·kg-1(乙醇、240℃除外).不同溶剂油成分差别较大,采用水或正己烷,产物主要是脂肪酸类、烷烃及部分酰胺和腈类,采用乙醇或水-乙醇共溶剂,产物主要是酯类、烷烃类.生物质油沸点集中分布在250~500℃,添加乙醇溶剂可显著提高生物质油轻组分含量.     

盾构隧道纵向地震响应简化动力有限元法分析(英文)

本文重点关注对盾构隧道的纵向地震响应分析方法的研究,提出了一种简化的动力有限元分析方法。这种方法采纳了响应位移法的一些基本思想,采用和响应位移法一样的环梁和土弹簧模型,但采用动力有限元法来评估地基地震动,而摒弃了响应位移法中采用的地基振动为谐波形式的假定。与响应位移法相比,简化动力有限元法能够提高地基震动的计算精度,从而提高结构响应的计算精度;而与三维连续模型相比,新方法的计算规模小得多,从而能够大幅提高计算效率。然后,本文分别采用相应位移法和新提出的简化动力有限元法,对武汉长江隧道盾构段隧道进行了纵向地震响应分析,并对这2种方法计算结果的差异进行了分析。     

聚硅酸氯化铝处理皂素废水的研究

制备了聚硅酸氯化铝(PASC)絮凝剂,并用其进行了皂素废水处理实验。考察了絮凝剂投加量、pH值、搅拌速度对COD和浊度去除率的影响。结果表明,当絮凝剂投加量为9～13.5 mg/L、pH值5～7、搅拌速度150～250 r/min时,COD和浊度去除效果较好。最佳工艺条件为：絮凝剂投加量11.25 mg/L、pH值6、搅拌速度200 r/min。此时,COD去除率为93.7％,浊度去除率为97.5％。PASC的絮凝性能明显优于PAC。     

固定化解脂耶氏酵母处理油脂废水研究

利用海藻酸钙包埋固定的解脂耶氏酵母(Yarrowia lipolytica)分别降解以色拉油为惟一碳源和以葡萄糖为惟一碳源的污水,结果表明,在最佳处理条件下,固定化细胞在50 h内,能较好地降解废水中浓度为2 000 mg/L的色拉油和浓度为2 000 mg/L 的COD,降解率都在80%以上;固定化细胞对色拉油、COD降解效率随着时间的延长而增加、随着底物浓度的增加而下降;与未固定菌株相比,固定化细胞有着更好的储存稳定性和可重复使用性,结果进一步提示固定化解脂耶氏酵母适于含油废水以及高COD含量的生活污水处理。