Determination of three cresol isomers in sewage sludge by solid-liquid extraction with low temperature purification and gas chromatography-mass spectrometry

Abstract

Cresols are chemical contaminants derivative from phenol which can be found in sewage sludge. However, little attention has been given to monitoring these compounds in environmental matrices in the literature. Thus, the objective of this study was to develop a simple method based on solid-liquid extraction with low temperature purification for determining three cresol isomers in sludge. The quantification of these compounds was performed by gas chromatography coupled to mass spectrometry with a previous derivatization step. After a detailed study, the cresol recovery was higher than 91%, with relative standard deviation lower than 12% and a limit of quantification of 20?μg kg^?1. Linearity was achieved between 10 and 90?μg L^?1 (R² > 0.98) with the standard solutions prepared in matrix extracts due to the trouble caused by the matrix effect. The proposed method was applied with success for monitoring cresols in sewage sludge samples coming from six different wastewater treatment plants. All samples showed contamination by cresols, mainly p-cresol with values between 32.3 and 516.9?μg kg^?1. The majority of the analyzed samples showed a total sum of the isomers higher than the maximum residue limit established by Brazilian legislation (160?μg kg^?1).     

Effects of Weathering on Mechanical,Antimicrobial Properties and Biodegradation Process of Silver Loaded TPE Compounds

The incorporation of antimicrobial metals such as silver is an alternative to protect the material against microbial attack. However, loaded polymer can lose its antimicrobial properties after some time of use, and the additive may even leak out into the environment becoming harmful to non-target organisms. This study aims to evaluate the mechanical properties and antimicrobial activity of silver containing thermoplastic elastomer (TPE) samples exposed to weathering and the influence of additive incorporation in material biodegradation in the soil. For this purpose, silver ions (Ag⁺_bentonite, Ag⁺_phosphate) and silver nanoparticles (AgNp_silica) based additives were blended in a formulation of SEBS, polypropylene and mineral oil. The test samples were exposed to natural ageing over nine months, and were then evaluated according to their mechanical properties, antimicrobial activity, and degree of crystallinity and surface characteristics. The biodegradation process before and after natural ageing was evaluated through the generation of carbon dioxide. The results show that the action of natural ageing reduced the mechanical properties of loaded and unloaded TPE, and modified the degree of crystallinity and the chemical characteristic of the TPE surface. The presence or type of additive did not influence material resistance after being exposed to weathering. A decrease in antimicrobial activity in samples after natural ageing was observed. At a variable level and according to the chemical content, generation of carbon dioxide from TPE samples was greater in aged samples than in unexposed ones.     

Local knowledge about dugout canoes reveals connections between forests and fisheries

Dugout canoes are traditional boat types made from a single tree trunk. This type of boat can reveal unique connections between forest and fisheries in coastal areas: their construction and the species used depend on the local ecological knowledge of artisans and the plant resources available and are also influenced by the type of fisheries in which the canoe will be used. Our objective was to analyze how dugout canoes are constructed, maintained, and currently used in the central coastal region of Santa Catarina, Brazil. The study emphasizes the interaction between the use of forest resources and artisanal fishing in this coastal environment. The data collected were based on interviews with 30 artisans and participant observation. Schizolobium parahyba (Vell.) Blake, Ocotea porosa (Nees & Mart.) Barroso, Ocotea Aubl../Nectandra Roll. Ex Rottb., and Aspidosperma Mart. & Zucc. are the main taxa used to construct the canoes. Many canoe sizes are used, and based on the boat type, the trunk diameters needed to construct them varies from 0.6 to 2.9 m and trunk heights from 4 to 10 m. Different types of canoe are used according to the type of fishing and especially to the environment conditions. The construction of canoes in the region has decreased due to difficulties in acquiring wood, changes in fishing activities, and reasons related to labor and apprenticeship, all causes related to modernization of the society and urban growth. The knowledge of plant species used can contribute to shape policies to improve forest management. The survival of cultural practices in artisanal fishing communities should be stimulated in sustainable development programs, and it involves maintaining ecological and technical knowledge related to fishing and the plant resources used to manufacture and maintain fishing equipment.     

Agricultural solid waste for sorption of metal ions,part II: competitive assessment in multielemental solution and lake water

Sugarcane bagasse and hydroponic lettuce roots were used as biosorbents for the removal of Cu(II), Fe(II), Mn(II), and Zn(II) from multielemental solutions and lake water, in batch processes. These biomasses were studied in natura (lettuce roots, NLR, and sugarcane bagasse, NSB) and chemically modified with HNO₃ (lettuce roots, MLR, and sugarcane bagasse, MSB). The results showed higher adsorption efficiency for MSB and either NLR or MLR. The maximum adsorption capacities (q_max) in multielemental solution for Cu(II), Fe(II), Mn(II), and Zn(II) were 35.86, 31.42, 3.33, and 24.07 mg/g for NLR; 25.36, 27.95, 14.06, and 6.43 mg/g for MLR; 0.92, 3.94, 0.03, and 0.18 mg/g for NSB; and 54.11, 6.52, 16.7, and 1.26 mg/g for MSB, respectively. The kinetic studies with chemically modified biomasses indicated that sorption was achieved in the first 5 min and reached equilibrium around 30 min. Sorption of Cu(II), Fe(II), Mn(II), and Zn(II) in lake water by chemically modified biomasses was 24.31, 14.50, 8.03, and 8.21 mg/g by MLR, and 13.15, 10.50, 6.10, and 5.14 mg/g by MSB, respectively. These biosorbents are promising and low costs agricultural residues, and as for lettuce roots, these showed great potential even with no chemical modification.     

Integrated spatiotemporal trends using TRMM 3B42 data for the Upper São Francisco River basin,Brazil

Trend analysis is an important issue for the decision-making processes. Thus, trends of rainfall, consecutive dry days (CDD), and consecutive wet days (CWD) in the Upper São Francisco River basin, Brazil, using daily rainfall data from the Tropical Rainfall Measuring Mission (TRMM) for recent 18 years, were analyzed. Instead of analyzing the trend of one average time series for one specific confidence level, a spatiotemporal analysis over the entire area with 169 continuous time series is done by applying the nonparametric Mann-Kendall and Sen tests for simultaneously 13 confidence levels and a new integrated confidence classification is proposed. The results show that the rainfall has increased during the less rainy periods (from June to October) and has decreased in the rainy periods (from November to May), with the highest and lowest confidence levels, respectively. An analysis of CDD and CWD shows that the number of CDD has decreased, while the number of CWD has increased, which revealed that the dry periods are more frequently interrupted for the period studied.     

Elaeis guineensis-activated carbon for methylene blue removal: adsorption capacity and optimization using CCD-RSM

Environment, Development and Sustainability - The activated biochar is a carbonaceous material obtained from thermal degradation of biomass with high adsorption potential. On the other hand, the...     

Biological activities of the essential oil from the leaves of Lantana montevidensis (Spreng) Briq. in mice

Environment, Development and Sustainability - This work aimed to analyze the chemical composition and evaluate the anti-inflammatory and antinociceptive properties of the essential oil obtained...     

A proposed framework to assess upstream supply chain sustainability

There are few methods that are suitable for assessing the sustainability of companies and supply chains in an integrated way, taking into consideration the economic, social and environmental dimensions. This paper proposes a framework for assessing the sustainability of individual companies and their corresponding upstream supply chain. The framework consists of a set of steps to evaluate the sustainability of both the individual company and their upstream supply chain. The linear aggregation technique is suggested to combine the set of indicators from the economic, environmental and social dimensions of sustainability into a unique value, giving rise to a composite index for the company and corresponding supply chain. The proposed framework represents a contribution in the area of index construction and could be used as a valuable component of sustainability reporting and sustainability management practices. It also represents an important benchmarking tool, offering managers the possibility of identifying the supply chain partners that are best and worst performers in terms of sustainability while at the same time making it possible to improve company performance. Managers can adjust their company’s behaviour according to their sustainability index score and improve economic, social and environmental performance.     

Using the Framework for Integrated Sustainability Assessment (FISA) to expand the Multiregional Input–Output analysis to account for the three pillars of sustainability

Decision makers interested in promoting sustainable development must simultaneously consider the environmental, economic and social implications of any action. This article proposes the Framework for Integrated Sustainability Assessment (FISA), a methodological framework for conducting a sustainability impact assessment of any investment project. Based on a Multiregional Input–Output (MRIO) framework, FISA links the extended MRIO results with social risk data from the Social Hotspots Database (SHDB) in order to integrate the social with the environmental and economic pillars. Resulting impacts are simultaneously considered and reported by means of FISA charts, making it possible to assess the different impacts within the three sustainability pillars across countries involved in the whole supply chain of investment projects. This methodological framework can be applied not only to compare the sustainability impacts of two alternative projects, but also to derive specific recommendations aimed at minimizing the harmful social, environmental and economic effects along the whole project supply chain.