Women and community water supply programmes: An analysis from a socio-cultural perspective

Community water supply programmes are seen as instrumental in achieving the goal of ‘safe’ water for all. Women, a principal target group of these programmes, are to be benefited with greater convenience, enhanced socio‐cultural opportunities and better health for themselves and their families, provided through improved water facilities. Water supply programmes largely consist of three essential components, namely: technology, people and institutions. Although such programmes are intended to benefit women members of local communities, scant attention is paid to the impacts of the socio‐cultural context of the community on these programmes. This article explores the influence of social and cultural intricacies on the implementation of community water supply programmes, and assesses their effectiveness. The article offers important lessons for the design and implementation of this type of programme. It concludes that the local socio‐cultural context sets the stage for programme implementation, being a dynamic factor that determines actual access to water sources, more so than mere physical availability, which is often used as a criterion for programme performance. The article stresses the urgent need to integrate socio‐cultural factors as a fourth dimension in designing community water supply programmes, and suggests practical measures for enhancing the effectiveness of such programmes.     

Solvent-free sampling with di-n-butylamine for monitoring of isocyanates in air

The solvent-free sampler for airborne isocyanates consisted of a polypropylene tube with an inner wall coated with a glass fibre filter, coupled in series with a 13 mm glass fibre filter. The filters were impregnated with reagent solution containing equimolar amounts of di-n-butylamine (DBA) and acetic acid. Air sampling was performed with an air flow of 0.2 l min(-1). The formed isocyanate-DBA derivatives were determined using liquid chromatography and tandem mass spectrometry. The sampler was investigated in regard to collection principle and extraction of the formed derivatives with good results. The possibility to store the sampler before sampling and to perform long-term sampling was demonstrated. Field extraction of the sampler was not necessary, as there was no difference between immediately extracted samples and stored ones (2 days). In comparative studies, the sampler was evaluated against a reference method, impinger-filter sampling with DBA as reagent. The ratios between the results obtained with the sampler and the reference in a test chamber at a relative humidity (RH) of 45% was in the range of 83-109% for isocyanates formed during thermal decomposition of PUR. At RH 95%, the range was 72-101% with the exception of isocyanic acid. In two field evaluations, the ratios for fast curing 2,4'- and 4,4'-methylene bisphenyl diisocyanate (MDI) was in the range 81-113% and for the 3-ring MDI the range was 54-70%. For the slower curing 1,6-hexamethylene diisocyanate (HDI) and HDI isocyanurate, the ratios were in the range 78-145%. In conclusion, the solvent-free sampler is a convenient alternative in most applications to the more cumbersome impinger-filter sampler.     

Monitoring and measurement of microalgae using the first derivative of absorbance and comparison with chlorophyll extraction method

Monitoring of microalgae in water supplies and industrial applications are becoming increasingly important, yet there are few options available that are simple and accurate, and can provide real-time information. The present work illustrates a new method to determine the concentration of microalgae in water and wastewater using spectrophotometry and the first derivative of absorbance. Chlorella vulgaris was used as an indicator microalga, spiked in water samples representing a range of water qualities (distilled water, surface water, and wastewater), and correlations among C. vulgaris concentrations, absorbance, and the first derivative of absorbance measurements were investigated. In addition, detection limits were established and sensitivity analyses were carried out to determine the lowest C. vulgaris concentrations that can be confidently measured in different water matrices. Finally, the study compared the performance and detection limits of the spectrophotometry-based methods with the well-accepted chlorophyll extraction method. A strong linear relationship (R²?>?0.97) was found between C. vulgaris concentration and absorbance at 695 nm. Using the first derivative of absorbance improved C. vulgaris detection limits by reducing the effects of the background noise and interferences from other substances. The detection limits established using the first derivative method were 0.47, 0.56, and 1.96 mg TVS/L in distilled water, surface water, and wastewater, respectively. In comparison, the detection limits of the chlorophyll extraction method were found to be 19.6, 38.6, and 48.3 mg TVS/L in the same water matrices. These results indicate that first derivative of absorbance can be successfully used for monitoring of microalgae in surface waters and environmental samples as well as in bioreactors used for microalgae cultivation in industrial applications.     

Pharmazeutisch aktive Substanzen in kleinen Fließgewässern

Background

Current hydrological research is increasingly focusing on pharmaceutically active compounds (PhACs). Concerning the issue of quality of drinking water, this problem has also become the focus of public interest. However, in spire of the fact that the fate of chemicals in surface waters has been assessed in great detail, the influence of groundwater-exchange is yet only little known.

Goal

This study gives emphasis to the question of how transport and degradation of PhACs interact with the exchange of surface water with groundwater. Special interest is given to alternating groundwater regimes.

Methods

Based on a small stream system in the north of Berlin, Germany, a one-dimensional compartment-model was established using differential mass-balance. The stream which, at its mouth, discharges 0.3 m³ s^?1 is already well investigated and thus provides a good empirical data basis. The processes taken into account by the model were ‘exchange of surface-water with groundwater’, ‘decomposition’ as well as ‘transport’ of PhACs. Calculations were performed using the commonly used analgesic Diclofenac as an example and defining 81 scenarios by different groundwater regimes. Hasse Diagramm Technique was used to compare the scenarios.

Results

All scenarios show a big influence of groundwater-exchange to the fate and concentration of PhACs in surface waters. In the case of the modelled stream system, dilution by groundwater was more responsible for a decrease in concentration than degradation was. Furthermore, on the background of a standard scenario, the loss due to groundwater by 5.4 percent was in the same magnitude as the loss due to decomposition (9.7 percent). A crucial difference between punctual versus linear afflux of groundwater has not been observed.

Discussion

The alteration of discharge resulted in a big influence of the case differentiation between ‘constant velocity’ and ‘constant cross-section’. Furthermore, the model was based on the assumption that groundwater was unloaded with PhACs or diluted very well in comparison to the stream. In contrast, regarding measurements in the catchment, groundwater could even be a diffuse source of the contamination of the stream.

Conclusions

The fate of PhACs in our model is crucially driven by interactions with groundwater. Therefore, assessing the risk emanating from substances like Diclofenac, it is very important to regard their accessibility to decomposition as well as the morphology of the stream-system and its interactions with the groundwater.

Perspectives

In this model, the process of transport from the surface to groundwater back to the surface was dealt with insufficiently; in order to be able to observe fully developed interaction in a further step of modelling, a groundwater-transportmodel should be coupled completely with a surface-water-model.     

A Simple and Flexible Risk Assessment Method in the Work Environment

The existing risk assessment models in the work environment (on the basis of Standard No. BS 8800:1996; British Standards Institution, 1996) contain the need to determine the probability of the occurrence and the severity of consequences of the influence of hazardous factors on the worker. The determination of the probabilities of the influence of hazards (noise, vibration, chemicals, etc.) is complicated.

The authors of this article have developed a simple risk assessment method that does not contain the probabilities. The method is based on a 2-step model that could be enlarged into a 6-step model.

The implementation possibilities of the model are presented. The existing norms in the work environment in Estonia were analysed and the safety level of a wood-processing factory was determined.     

Modeling of Dry Injection Flue Gas Desulfurization

Dry processes for controlling sulfur dioxide emissions by injecting sodium based sorbents in the ductwork ahead of a bag filter are effective and more simple alternatives to conventional FGD processes. This paper presents a fundamental kinetic model of the dry injection process. Experimental data from pilot scale tests are reported. The model is shown to be applicable to the dry injection process. However, further experimental work is recommended to get a better understanding of the reaction mechanisms.     

The influence of biomass energy consumption on CO<Subscript>2</Subscript> emissions: a wavelet coherence approach

In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables’ efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO₂ emissions in the long run cycles after the year 2005 in the USA.     

Exposure to airborne organophosphates originating from hydraulic and turbine oils among aviation technicians and loaders

This study describes the potential for occupational exposure to organophosphates (OPs) originating from turbine and hydraulic oils, among ground personnel within the aviation industry. The OPs tri-n-butyl phosphate (TnBP), dibutyl phenyl phosphate (DBPP), triphenyl phosphate (TPP) and tricresyl phosphate (TCP) have been emphasized due to their use in such oils. Oil aerosol/vapor and total volatile organic compounds (tVOCs) in air were also determined. In total, 228 and 182 OPs and oil aerosol/vapor samples from technician and loader work tasks during work on 42 and 21 aircrafts, respectively, were collected in pairs. In general, the measured exposure levels were below the limit of quantification (LOQ) for 84%/98% (oil aerosol) and 82%/90% (TCP) of the samples collected during technician/loader work tasks. The air concentration ranges for all samples related to technician work were 相似文献   

Mineral and heavy metal contents of the outer and inner tissues of commonly used fruits

The rate of heavy metal pollution in some minor fruit samples growing at roadsides in Turkey were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The mineral contents of samples were found to be different depending on the several parts Citrus fruits. The highest minor and heavy metal levels for Citrus fruits were determined between 17.24 and 45.30 mg/kg boron, 2.08 and 15.05 mg/kg copper, 1.01 and 16.00 mg/kg iron and 2.35 and 9.87 mg/kg zinc. Boron content ranged from 16.54 mg/kg (Deveci pear inner pulp) to 89.89 mg/kg (Arjantin apple outer skin). The level of Fe ranged from 1.49 mg/kg (quince pulp) to 25.05 mg/kg (Ankara pear pulp). Cu content of fruits ranged between 2.52 mg/kg (Fuji apple skin) and 25.93 mg/kg quince skin). Zn content was found between 0.46 mg/kg (Golden apple pulp) and 14.34 mg/kg (quince skin). P contents ranged from 651 mg/kg (Golden apple pulp) to 1269 mg/kg (quince skin). Na was found between 500 mg/kg (Fuji apple skin) and 907 mg/kg (Arjantin apple skin).