Influence of peatland and land cover distribution on fire regimes in insular Southeast Asia

Anthropogenic biomass burning in insular Southeast Asia facilitates conversion and degradation of ecosystems and emits high amounts of carbon into the atmosphere. We analyzed the influence of peat soil and land cover distribution on the occurrence and characteristics of vegetation fires. Two years of satellite-based active fire detections over Peninsular Malaysia, Sumatra, Borneo and Java were examined together with land cover and peatland maps. Our results showed that fire occurrence nearly tripled (23,000 → 68,000) from a wet La Niña year (2008) to a drier El Niño year (2009). In both years, fires were concentrated in peatlands (in 2009 41% of fires vs. 10% of land area), and the majority of large-scale burning took place in peatlands. Variation in peatland land cover within the study area was noticed to create remarkable different fire regimes. Biomass burning in the intensely managed Sumatran peatlands was characterized by large-scale land clearance fires that took place annually to varying extent. The largely unmanaged degraded peatland ecosystems of Borneo, on the other hand, experienced very little fire activity in a wet year but were ravaged by large-scale wildfires when El Niño conditions arose. We conclude that fire regime characteristics in insular Southeast Asia are strongly connected to occurrence of peat soil and land management status. This leads to high variation of fire activity within this region both annually (depending on weather patters) and over longer time range (depending on land cover/management issues) and greatly complicates estimation of the effects of fires.     

Challenges posed by climate change: is environmental protection an ethical issue?

Climate is one of the more complex physical systems in nature, its behaviour being fundamentally non-linear and chaotic. In assessing the potential risks from climate change and the costs of averting it, researchers and policymakers encounter pervasive uncertainty. Sceptics demand to get rid of the inherent uncertainties, and some experts, on the other end, keep sending out messages of catastrophic scenarios hoping that this will increase people’s awareness of the danger we face. The recent admission of a mistake in IPCC’s Climate change 2007 report (promptly broadcast by all the major media groups and newspapers from Jan. 20th 2010 onwards) made by the head of the Intergovernmental Panel on Climate Change—that Himalayan glaciers could melt away by 2035 (the IPCC claim of 2035 is wrong by over 300 years.)—has already brought a damage to the IPCC’s reputation that is likely to be considerable. But in this paper, perhaps risking being provocative and paradoxical, instead of looking for the right answers to what we think are inevitable uncertainties, we intend to search for new questions that may lead to a new way of thinking and may bring about new lifestyles and behaviour for citizens and firms.     

Drivers that help adopting stabilised earth construction to address urban low-cost housing crisis: an understanding by construction professionals

Addressing urban housing crisis is an enormous challenge for most of the countries due to the increasing cost of the building material. Therefore, affordable alternative building material can make a breakthrough to the urban housing crisis. In the light of current success of stabilised earth construction in urban low-cost housing, it is important to find out the potential drivers that can help to adopt this building material. This paper aims to identify and highlight these drivers from the method of literature review and validates through a Delphi technique.     

Social cost of environmental pollution and application of counter measures through clean development mechanism: in the context of developing countries

The developing countries i.e., the non-Annex-I countries (parties to the Kyoto Protocol but not responsible to any reduction target yet) in the Kyoto Protocol whose economies are in transition are also allowed to reduce GHG emissions. Among these, the countries that have accepted the Kyoto Protocol may be benefited from CDM projects to promote sustainable development. The developed countries i.e., the Annex-I countries (that have signed the Kyoto Protocol & are responsible to have specific GHG emission reduction target) or the investing countries, in return, have privilege to purchase CER credits (in units equivalent to one tonne of CO₂ gas emission reduction) to meet the emission target as specified in the Kyoto Protocol. The key step in understanding about CDM is to grasp the concept of “baseline” and “additionality”. The “Baseline” is the emissions level that would have existed if a CDM project had not happened. The feature of an approved CDM project is that the planned reductions would not occur without the additional incentive provided by emission reduction credits; this concept is known as “Additionality”. According to environmental additionality concept, baseline emission minus project emission is equal to emissions reduction. “Investment Additionality,” ultimately rejected during negotiation of the “Marrakech Accords” and “Financial Additionality,” are the two important concepts. The concept of trading of CER matches to the idea of Pigovian tax (equal to the negative externality and which is considered one of the “traditional” means of bringing a modicum of market forces) in Economics, making pollution more costly to the polluter, as the polluters have negative cost since they save money by polluting; hence, there are supposed negative externalities associated with the market activity. Economic theory predicts that in an economy where the cost of reaching mutual agreement between parties is high and where pollution is diffuse, Pigovian tax will be an efficient way to promote the public interest and will lead to an improvement of the quality of life measured by the Genuine Progress Indicator and other human economic indicators, as well as higher gross domestic product growth. We can seek a level of pollution such that the marginal savings (MS) to one polluting unit from pollution (−MC) is equal to marginal damage (MD) from pollution over the entire population, since pollution is a public bad i.e., MS (x*) = ∑MD_i (x*) where ∑D_i (x) is the total damage. Though the responsibility of reduction in emission does not lie on the non-Annex-I countries, still effort of maintaining global emission balance can be expected equally from developed and developing countries. The responsibilities of Kyoto Protocol are (a) to reduce global GHG emissions, (b) to bring about sustainable development in the developing countries lie on above two groups since its effect on February 16, 2005. Different polluters have different costs of pollution control. The least costly way of controlling pollution from various sources that reflects different costs of pollution control making the set of environmental regulations to achieve the emission target at the lowest cost makes the regulation cost-effective. Though efficiency is not attainable for many regulations, cost-effectiveness is attainable.     

Intensification level of rice farming in Myanmar: implication for its sustainable development

This study aims to estimate the intensification of rice farming in Myanmar particularly due to chemical fertilizer application, using farm-level data obtained from field surveys conducted in the 2000s. Relatively high-input rice farming was found in dry season crop in the delta zone and the double crop in well-irrigated lowlands of the central dry zone. The chemical fertilizer used there was about 88–159 kg NPK (nitrogen, N; phosphate, P₂O₅; and potash, K₂O) ha⁻¹ (76–110 kg nitrogen (N) ha⁻¹), and the average paddy yield ranged from 2.8 to 3.5 ton ha⁻¹. On the other hand, nutrient input in survey sites of rain-fed lowland was between 11 and 53 kg NPK ha⁻¹ (5 and 36 kg N ha⁻¹), and the yield ranged from 1.1 to 2.3 ton ha⁻¹. The national average of paddy yield and nutrient input of fertilizer was roughly estimated to be around 2.4 ton ha⁻¹ and 60 kg NPK ha⁻¹, respectively. A gap was observed between these calculated values and the official statistics. A comparison of fertilizer use efficiency for rice production in Myanmar with that in China and Vietnam has shown that the efficiency in Myanmar has not declined to an inappropriate level even in its intensive ones. Rice production in Myanmar has room for increasing the yield by capital intensification. Nevertheless, considering its sustainability as well as productivity, further intensification in rice farming technology in irrigated lowlands of Myanmar may neither be the best nor the only way.     

A study on legislative and policy tools for promoting the circular economic model for waste management in China

The circular economy has been developing rapidly in recent years in China. A legislative system has been created to provide legal protection for the development of a circular economy, including a series of price and tax measures in the waste management area. These measures form the basic foundation for promoting better waste management under the circular economic model. Many challenges, however, remain. For instance, the legal system needs to incorporate more sophisticated science, and China lacks key waste treatment technology that could support the further development of a circular economy. There is also a need to educate the public about the concept of the circular economy and its benefits. Specific suggestions are made for the development and implementation of the circular economic model.     

The effect of the addition of fly ash to municipal digested sludge on its electroosmotic dewatering

Effective handling of municipal digested sludge requires that the product cake have low water content. To this end, we investigated the change in sludge dewaterability after the addition of fly ash to municipal digested sludge, dewatering of which is difficult because of its high organic content. The performance of the dewatering is compared with that of electroosmotic dewatering (EDW) and conventional mechanical dewatering (CMD). Fly ash classified by sieving to the size of 25–75 μm and >75 μm is added to the municipal digested sludge by 10, 20, and 50 wt% by wet base. When adding fly ash particles to municipal digested sludge, dewatering efficiency improved with smaller fly ash particle size and with increase in the amount. When sludge was dewatered using an electroosmotic dewatering method, the dewatering efficiency is improved about 40% by adding fly ash of 25–75 μm particle size with 20 wt% when compared with conventional mechanical dewatering method without adding the fly ash. It is concluded that fly ash particles rich in inorganic material are helpful in the dewatering process when added to municipal digested sludge and EDW is more effective than CDW.     

Archaeal Poly (3-hydroxybutyrate) Polymer Production from Glycerol: Optimization by Taguchi Methodology

In this study the possibility of poly (3-hydroxybutyrate) production from glycerol was investigated and optimized by Halorcula sp. IRU1, a novel archaea isolated from Urmia lake, Iran in batch experiments. Using Taguchi methodology, three important independent parameters (glycerol, yeast extract and KH₂PO₄) were evaluated for their individual and interactive effects on poly (3-hydroxybutyrate) production. It was shown that the glycerol concentration was the most significant factor affecting the yield of poly (3-hydroxybutyrate). The optimum factor levels were a glycerol concentration of 8% (v/v), yeast extract 0.8% (w/v) and KH₂PO₄ 0.002% (w/v). The predicted value obtained for poly (3-hydroxybutyrate) production under these conditions was about 81.87%. We can conclude that Haloarcula sp. IRU1 has a high potential for synthesis of poly (3-hydroxybutyrate) from glycerol.     

Preformed Amide-containing biopolymer for Improving the Environmental Performance of Synthesized Urea–formaldehyde in Agro-fiber Composites

Investigations have continued for production high performance agro-based composites using environmentally acceptable approaches. This study examines the role of adding amide-containing biopolymers during synthesis of urea–formaldehyde (UF) on properties of adhesive produced, especially its adhesion potential. The environmental performance of UF-resin synthesized in the presence of modified amide-containing biopolymer was evaluated by evaluating the free-HCHO of both adhesive (during processing) and of the eventual engineered composite product. Also, the benefits of this synthesis-modified adhesive in enhancing the bondability of sugar-cane fibers used in engineered composite panels was evaluated and compared to using UF-resin. The results obtained show that, static bending of the produced composites varied from 27.7 to 33.13 N/mm² of modulus of rupture (MOR) and from 2860 to 3374 N/mm² of Modulus of Elasticity (MOE); while for internal bond (IB) it’s varied from 0.64 to 0.866 N/mm². Based on the ANSI and EN Standards modified UF-based agro composites produced meet the performance requirements for high grade particleboards with respect to static bending strength. These agro-based composite also tested out as having free-HCHO values of ~13 mg/100 g board.     

Effects of Filler Content and Compatibilizing Agents on Mechanical Behavior of the Particle-Reinforced Composites

The study was carried out to investigate the effects of filler content and two different compatibilizing agents (Eastman G-3003 and G-3216) on the mechanical properties of polypropylene reinforced with corn stalk and wood flour. In the sample preparation, three levels of filler loading (30, 40 and 50 wt%) and one level of compatibilizing agent content (2.5 wt%) were used. For overall trend, with addition of both grades of the compatibilizing agents, tensile and flexural properties of the composites significantly improved, as compared with the pure PP. Tensile and flexural properties reach a maximum at 40 wt% filler content and gradually decrease with a further increase in wood particle content. The composites treated with G-3003 gave better results in comparison with G-3216. This could be caused by the high melt viscosity of G-3003. In general, corn stalk flour filled composites showed superior mechanical properties.