Bioccumulation and toxicity of Cu and Cd in Vallisneria spiralis (L.)

Accumulation of Cu and Cd by Vallisneria spiralis was studied under laboratory conditions. Plants showed ability to reduce 5 µg ml^–1 Cu background concentration to below 0.05 µg ml^–1 (m.p.l., WHO 1985) within 48 h. The Cd concentration of 1.0 µg ml^–1 was reduced to below m.p.l. (0.005 µg ml^–1) in 168 h. Cysteine synthesis was more under Cd stress condition. Both the metals were toxic to the plants at higher concentrations; more in the case of Cd.NBRI Rsearch Publication No. 417 (N.S.).     

A Statistical Analysis of Particulate Data Sets for Jawaharlal Nehru Port and Surrounding Harbour Region in India

The concentrations of total suspended particulate matter (TSP) and particulate matter less than 10 microns (PM10) were measured at various locations in a Jawaharlal Nehru port and surrounding harbour region. Meteorological data was also collected to establish the correlation with air pollutant concentration. The results are analysed from the standpoint of monthly and seasonal variations, annual trends as well as meteorological effects. The monthly mean concentration of TSP was in the range of 88.2 to 199.3 microg m(-3). The maximum and minimum-recorded value of PM10 was 135.8 and 20.3 microg m(-3), respectively. The annual average concentration of PM10 was 66.1 microg m(-3). There are clear associations between TSP and PM10 data set at all the measured three sites with a correlation coefficient of 0.89, 0.69 and 0.81, respectively. PM10 data appears to be a constant fraction of the TSP data throughout the year, indicating common influences of meteorology and sources. Particle size analysis showed PM10 to be 47% of the total TSP concentration, which is lower than reported for industrial area and traffic junctions in Mumbai. Anthropogenic sources contribute significantly to the PM10 fraction in an industrial region, while contributions from natural sources are more in a port and harbour area. Statistical analysis of air quality data shows that TSP is strongly correlated with wind speed but weakly correlated with temperature. There appears to be a simple inverse relationship between TSP and wind speed data, indicating the dilution and transport by winds.     

Heavy metals in water,periphytonic algae,detritus, and insects from two streams in Shillong,Notheastern India

Cadmium, copper, manganese, lead and zinc concentrations were determined in water, periphytonic algae, detritus, and larvae of three aquatic insects, viz. Baetis sp. (Ephemeroptera: Baetidae), Hydropsyche sp. (Trichoptera: Hydropsychiidae), and Chironomus ramosus Choudhury and Das (Diptera: Chironomidae), during two surveys from an unpolluted and a polluted stream in Shillong, Meghalaya State, Northeastern India. Metal concentrations were higher in all the samples from the polluted stream, possibly reflecting the contributions from various non-point sources of metal contamination present in its catchment. Among the three insects, Baetis sp. was found to accumulate cadmium, copper, and zinc, and Hydropsyche sp. manganese, to concentrations significantly higher than those found in the other taxa. The concentrations of all the metals were higher in fine detritus than in C. ramosus, although Cd and Zn concentrations were elevated in Baetis as compared to those in periphytonic algae and fine detritus, indicating possible bioconcentration of these metals by this animal.     

Statistical analyses of coastal water quality for a port and harbour region in India

A long-term study of temperature, pH, turbidity, suspended solid, salinity, dissolved oxygen, biochemical oxygen demand and ammonia nitrogen has been performed in a port and harbour region in India for four years from December 1996 to November 2000. Marine water quality results showed no regular trend. The mean monthly values of temperature, pH, turbidity, suspended solid, salinity, dissolved oxygen, biochemical oxygen demand and ammonia nitrogen were in the range of 22.64 ± 0.4 to 29.05 ± 1.37 °C; 7.65 ± 0.04 to 7.81 ± 0.13; 28.8 ± 14.7 to 64.2 ± 32.0 NTU; 283.5 ± 81.8 to 356.0 ± 159.7 mg/L; 29.78 ± 7.18 to 29.78 ± 1.04 ppt; 4.67 ± 0.50 to 6.01 ± 1.02 mg/L; 5.41 ± 1.92 to 7.56 ± 2.1 mg/L; and 0.25 ± 0.07 to 0.63 ± 0.49 mg/L, respectively. The results of correlation analysis showed that biochemical oxygen demand (BOD) was inversely correlated dissolved oxygen (DO) and poorly correlated with all other parameters. Turbidity and suspended solid were moderately correlated with each other while salinity was moderately correlated with other water quality parameters. In factor analysis, four factors were drawn out of the eight variables, which represented 74% of the variance of the original data. Factor I was related to suspended solid and turbidity. Factor II represented mainly temperature and DO showing inverse relation between these two. Factor III implied the degree of pollution at any monitoring station. Factor IV included pH and salinity. It could be concluded that the factor model represented almost all the variables.     

Investigating mechanical properties and durability of concrete containing recycled rubber ash and fibers

This article investigates the suitability of utilizing end of life rubber tyre particles in concrete as fine aggregate. Rubber ash and rubber fibers were used to develop two series of rubber ash concrete (series I) and hybrid concrete (series II) mixes. The natural fine aggregate was replaced by rubber ash (by volume of 5%, 10%, 15% and 20%) in series I; whereas in series II, the amount of rubber ash was kept constant at 10% and rubber fiber was introduced as replacement of fine aggregate (by volume of 5%, 10%, 15%, 20% and 25%). The concrete mixes were evaluated for compressive strength, flexural strength, resistance to impact loading, fatigue loading, water penetration and shrinkage strain was evaluated. It was observed that inclusion of rubber ash resulted in the improvement of impact resistance of concrete. The results also show that up to 10% rubber ash and rubber fibers can be utilized as fine aggregate to develop feasible and durable rubberized concrete pavements, crash barriers and paver blocks.

     

Removal of chromium(VI) from electroplating industry wastewater using bagasse fly ash—a sugar industry waste material

A waste product generated in the sugar industry in India has been converted into a cheap potential adsorbent. This has been characterised and utilized for the removal of chromium (VI) from synthetic and actual wastewater. The sorption efficiency decreases with increase in pH. Adsorption of Cr (VI) on bagasse fly ash follows the Freundlich and Langmuir isotherms and these have been used to obtain the thermodynamic parameters of the process. The sorption capacity of this adsorbent for chromium removal is found to be comparable to other low cost adsorbents.     

Characterization of Biodegradable Packaging Films Derived from Potato Starch and LDPE Grafted with Maleic Anhydride–LDPE Composition. Part-II

LDPE has been mixed with LDPE-g-mA (LDPE grafted with (0.5%) maleic anhydride) in 1:1 ratio containing a polar group in the LDPE backbone. Blown film samples containing various percentages of Potato Starch 0, 2.5, 5.0, 7.5, 10.0, 12.5 and 15% and LDPE grafted with maleic anhydride/LDPE (1:1), have been prepared using extrusion film blowing under temperature profile ranging from 120 to 160 °C. Characteristics of prepared packaging films up to 15% Potato Starch were analysed for their mechanical properties (Tensile strength, Elongation at break, Bursting strength and Tear strength), water absorption properties and morphology. The compatibility of the system with the introduction of 50% LDPE grafted with maleic anhydride with various ratios of starch, have been verified with the help of resulting datasets. The resulting datasets were placed in theoretical models of Willet modifies Kerner’s equation and Nicolais and Narkis models. Procedure adopted above could make thermally stable, highly flexible, crystalline resultant material, which can be adopted as an alternative of LDPE material especially for packaging applications.     

Reserve design to optimize functional connectivity and animal density

Ecological distance-based spatial capture–recapture models (SCR) are a promising approach for simultaneously estimating animal density and connectivity, both of which affect spatial population processes and ultimately species persistence. We explored how SCR models can be integrated into reserve-design frameworks that explicitly acknowledge both the spatial distribution of individuals and their space use resulting from landscape structure. We formulated the design of wildlife reserves as a budget-constrained optimization problem and conducted a simulation to explore 3 different SCR-informed optimization objectives that prioritized different conservation goals by maximizing the number of protected individuals, reserve connectivity, and density-weighted connectivity. We also studied the effect on our 3 objectives of enforcing that the space-use requirements of individuals be met by the reserve for individuals to be considered conserved (referred to as home-range constraints). Maximizing local population density resulted in fragmented reserves that would likely not aid long-term population persistence, and maximizing the connectivity objective yielded reserves that protected the fewest individuals. However, maximizing density-weighted connectivity or preemptively imposing home-range constraints on reserve design yielded reserves of largely spatially compact sets of parcels covering high-density areas in the landscape with high functional connectivity between them. Our results quantify the extent to which reserve design is constrained by individual home-range requirements and highlight that accounting for individual space use in the objective and constraints can help in the design of reserves that balance abundance and connectivity in a biologically relevant manner.     

Study of electromagnetic shielding effectiveness of metal oxide polymer composite in their bulk and layered forms

Environmental Science and Pollution Research - In this paper, we present the studies on electromagnetic interference (EMI) shielding effectiveness (SE) of K2CrO4-PMMA composites developed by two...