COMPUTER APPLICATION TO DOUBLE-MASS ANALYSIS1

ABSTRACT: Double-mass analysis for checking consistency of a hydrological record is considered to be essential before taking it for analysis purpose. Because of increasing computer application in hydrological analyses, in the present paper, a simple and efficient method for the double-mass checking has been developed. The problem has been formulated in FORTRAN IV language and the basic steps and a computer output of the program are presented in a flow chart and a table.     

Pollution abatement in the indian pulp and paper industry

Summary In this paper, pollutants in air, water and as solids which stem from the paper industry are discussed, and pollution abatement measures are suggested. The Pulp and Paper Industry is highly capital, material and energy intensive and return on investment is very low. This paper reviews some emerging international principles which are effective in reducing both effluent treatment costs per tonne of paper and the mill discharges, to levels where their environmental impacts become far less significant than at present.Mr Avijit Dey is a graduate in Chemical Engineering from Jadavpur University and at present is Design Engineer in the Paper and Process Cell of Development Consultants Ltd, 24-B Park Street, Calcutta 70016, India. Dr B. Sen Gupta is Reader in the Chemical Engineering Department of Jadavpur University, Calcutta. He obtained his BChE and PhD in Chemical Engineering from Jadavpur University and an ME in Chemical Engineering from the Indian Institute of Science, Bangalore. His research interests involve pulp and paper technology, water conservation and management, and pollution control.     

Influence of chemical oxygen demand/total Kjeldahl nitrogen ratio and sludge age on nitrification of nitrogenous wastewater.

Four laboratory-scale biological nitrification units (influent total Kjeldahl nitrogen [TKN] = 1002 to 1062 mg/L) were operated at chemical oxygen demand (COD)/TKN ratios of approximately 0.5, 1.0,15, and 2.0 and at three different sludge ages of 30, 20, and 10 days to study the influence of COD/TKN, sludge age, COD loading, and TKN loading on nitrification and nitrifiers. Percent nitrification was found to increase with decreases in COD/TKN and increases in sludge age. The average nitrifier concentration increased from 460 mg/L at a COD/TKN of 2.22 and a sludge age of 10 days to 706 mg/L at a COD/TKN of 0.676 and a sludge age of 30 days. The nitrifier fraction was found to be higher at a lower COD/TKN and lower at a higher COD/TKN. The nitrifier fraction increased with the decrease in sludge age and COD loadings and the increase in TKN loadings. The effect of sludge age on the nitrifier fraction was amplified at a COD/ TKN of approximately 0.5 rather than at approximately 2.0. The nitrification rate (kilograms TKN oxidized per kilograms nitrifiers per day) was shown to be dependent on COD/TKN and sludge age. The activity performed by Nitrobacter was affected at all COD/TKN ratios studied as well as at a sludge age of 10 days. This was manifested by the accumulation of high levels of nitrite-nitrogen in the nitrified effluent. The presence of heterotrophs did not affect nitrification rates and the growth of nitrifiers, which were found to be beneficial. High sludge age and COD loadings resulted in a higher sludge volume index of more than 200 mL/g mixed liquor suspended solids. Microscopic examination showed filamentous structure of sludge under these conditions. It is concluded from the investigations that a sludge age of 30 days and a COD/TKN of approximately 1.0 are optimal to yield maximum nitrification and nitrifier growth rates for treating high-strength nitrogenous wastewater.     

Effects of nitrogen dioxide on leaf chlorophyll and nitrogen content of soybean

One-month-old soybean (Glycine max [L.] Merrill), cultivar 'Williams', plants were exposed to nitrogen dioxide (0.1, 0.2, 0.3 and 0.5 ppm) and carbon filtered air (control), 7 h per day, for 5 days, under a controlled environment. Leaf chlorophyll content (Ch a, Ch b, and total Ch content) and foliar nitrogen content (%N) were determined before and after the exposure. The influence of NO(2) treatments up to 0.3 ppm on leaf chlorophyll content was negligible although a stimulatory effect was evident in Ch a and total Ch content with 0.2 ppm NO(2). Marked decline in Ch content was observed with 0.5 ppm treatment; the reductions in Ch a and total Ch were 45% and 47%, respectively. Foliar-N contents of plants treated with 0.2 and 0.3 ppm NO(2) were higher than the control; plants exposed to 0.5 ppm NO(2) showed a 41% reduction in foliar-N compared to pre-exposure values.     

Leaching of aluminium from cookwares -- a review

Concern over the possible relation between environmental aluminium exposure and Alzheimer's disease has prompted studies of all forms of human intake of this element including that from foods. Aluminium cookware, apart from other sources of dietary aluminium, is considered to be a potential source of this metal to human beings. Various research groups have carried out aluminium leaching experiments with food, beverages and water under different experimental conditions modified by varying the level of pH, chloride, fluoride, citrate, acetate etc. The results reported by different workers show marked discrepancies in levels of leached aluminum. The apparent reason for such discrepancy in levels of aluminum leached can be attributed to factors such as non-systematic and non-uniform experimental designs, non-standard conditions maintained during the experiments and choice of method for aluminium analysis. In order to assess accurately the contribution of aluminium ingestion by human beings through aluminium cookware, the present review emphasises the need of i) standard size aluminium plates obtained from the same lot for one set of experimentations; ii) real life cooking conditions to highlight the role of various complexing species present in food e.g. citrate, oxalate, acetate, tartrate etc.; iii) role of chemistry of aluminium in presence of acidic, basic and neutral cooking medium and iv) strict analytical control in the estimation of aluminium. Results of a systematic study by the authors conducted on the abovementioned lines are also described.     

Exergy analysis of the transcritical N2O refrigeration cycle with a vortex tube

In this article, a comparative study is presented for the transcritical cycle with expansion valve (TCEV) and transcritical cycle with vortex tube (TCVT) mainly based on the second law of thermodynamics. Natural refrigerant nitrous oxide (N₂O) is used in both the cycles for analysis. The evaporator and gas cooler temperatures are varied from ?55°C to 5°C and 35°C to 60°C, respectively. The effects of various operating and design parameters on the optimum heat rejection pressure, coefficient of performance (COP), exergy loss (irreversibility), and the exergetic efficiency are studied. Exergy analysis of each component in TCEV and TCVT is performed to identify the amount and locations of irreversibility. It is observed that the use of the vortex tube in place of the expansion valve reduces the total exergy losses and increases the exergetic efficiency as well as COP. The exergetic efficiency and COP of the TCVT are on average 10–12% higher compared to TCEV for the considered operating conditions. The computed values of the exergetic efficiency for TCVT using refrigerant N₂O are the highest at an evaporator temperature of ?55°C, and the corresponding values of exergetic efficiency and exergy losses varies between 25.35% and 15.67% and between 74.65% and 84.33%, respectively. However, COP at the same evaporator temperature of ?55°C varies between 0.83 and 0.51. Furthermore, the optimum heat rejection pressure in TCVT is lower compared to that in TCEV. The results offer significant help for the optimum design and operating conditions of TCVT with refrigerant N₂O.     

Transparency in global sustainability governance: to what effect?

ABSTRACT

Transparency in environmental governance is no longer an uncontroversial answer to problems of accountability and effectiveness. How to design effective transparency systems and in what policy contexts they are effective remain contested issues. This special section, consisting of this introduction and four research articles, interrogates complex and potentially conflicting links between transparency, accountability, empowerment and effectiveness in environmental governance. Building on existing literature and the four contributions, we discuss persisting diversity in varieties of transparency, the evolving dynamics of commodity chain transparency, and the consequences of emerging novel forms of digitalized transparency. As we show, the contributions to this special section interrogate in novel ways the transformative potential of transparency, through shedding light on the performative effects of transparency in ever more complex environmental governance contexts. These contexts may include, inter alia, the growing ubiquity of traceability in transnational commodity chains, the need for ever more anticipatory (ex-ante) forms of environmental governance, and an ever-broadening quest for digitally monitored environments. In particular, the impacts of the real-time ‘radical’ transparency engendered by use of novel digital technologies remain under-analyzed in the sustainability domain. We conclude by raising several critical concerns that deserve further scientific research and policy debate.     

Growth and metal accumulation response of <Emphasis Type="Italic">Vigna radiata</Emphasis> L. var PDM 54 (mung bean) grown on fly ash-amended soil: effect on dietary intake

Plants of Vigna radiata L. var. PDM 54 (mung bean) were grown in soil amended with different amounts (10 and 25%) of fly ash (FA). Although total metal content increased with increasing FA amendment, DTPA-extractable metals were higher for 10% FA. Accumulation of metals by the plants increased with increasing FA amendment and was greater in shoots than in roots (except for Mn and Cu) and seeds (except Mn). The total daily intake (TDI) of all the tested metals in seeds was within the recommended dietary allowance (RDA)/provisional tolerable daily intake (PTDI) for adults, except for Cd, which was higher than recommended values. Principal-components analysis (PCA) based on studies of physicochemical properties, DTPA-extractable metals, and metal accumulation in the different parts of V. radiata showed that physicochemical properties such as cation-exchange capacity, organic carbon, and organic matter had significant positive effects on accumulation of Cd, Co, Ni, and Pb by the plant, whereas EC had a significant negative effect. Although addition of fly ash (10%) initially increased the rate of growth, toxic symptoms were observed for 25% FA. Results from analysis of antioxidants (carotenoids, ascorbic acid, non-protein thiol, and free proline) revealed that these increased more in plants grown in 10% FA than in those grown in garden soil. Cysteine and malondialdehyde (MDA) content increased with increasing FA amendment. PCA also showed that all the antioxidants studied behaved similarly except cysteine, for which there was a close relationship with MDA content. Thus, the results obtained during this study revealed that V. radiata L. var. PDM 54 may be grown in 10% FA and/or contaminated agricultural soil.