Effective wastewater treatment through conventional methods that rely on heavy aeration are expensive to install and operate. Duckweed is capable of recovering or extracting nutrients or pollutants and is an excellent candidate for bio-remediation of wastewaters. Such plants grow very fast, utilizing wastewater nutrients and also yield cost effective protein-rich biomass as a by-product. Duckweeds being tiny surface-floating plants are easy to harvest and have an appreciable amount of protein (15%–45% dry mass basis) and a lower fiber (7%–14% dry mass basis) content. Besides nutrient extraction, duckweeds has been found to reduce total suspended solids, biochemical oxygen demand (BOD), and chemical oxygen demand in wastewater significantly. Depending on the initial concentrations of nutrients, duckweed-covered systems can remove nitrate (NO3?) at daily rates of 120–590 mg NO3? m?2 (73%–97% of initial concentration) and phosphate (PO4?) at 14–74 mg PO4? m?2 (63%–99% of initial concentration). Removal efficiencies within 3 days of 96% and 99% have been reported for BOD and ammonia (NH3). Besides several genera of duckweeds (Spirodela, Lemna, Wolffia), other surface-floating aquatic plants like water hyacinth (Eichhornia) are well known for their phyto-remediation qualities. 相似文献
The ecotoxicities of three organic compounds containing spacer groups, an intermediate organotin premonomer, four organotin monomers, their homopolymers and six copolymers of tributylin α‐chloroacrylate (TCA) are reported against two microorganisms viz., Pseudomonas aeruginosa and Sarcina lutea and a larval species Anemia salina (Nauplii II). The organic compounds containing spacer group were less toxic whereas the monomers were found to be highly toxic. The homopolymers were found to be more toxic than that of tributyltin acrylate (TBTAA), tributyltin methacrylate (TBTMA) and tributyltin α‐Chloroacrylate (TCA). The toxicity of TCA copolymers increased with the increase in tributyltin (TBT) content in the polymer. From this study it was not possible to establish any relationship between the chemical nature of the comonomer with its toxicity. 相似文献
ABSTRACTThis case study was conducted in Himalayan watershed to understand traditional farming and socio-economic status of the people in Kumaon Himalaya, Uttarakhand, India. In spite of high literacy rate in this area, their livelihood security is reliant on traditional farming practices that include agroforestry beside forest produce. More than 85% farming is rainfed and managed in a traditional way. Land holding size owned by farmers in the area extended from 0.57 to 2.57 ha but majority of farmers (51–80%) had farms of size less than 0.50 ha. The study revealed that forests provided 73–79% of required energy from fuelwood and more than 81% fodder. Agroforestry, livestock (dairy and poultry/goat rearing) and labour employment are the major sources of income to the people in the watershed. The income of people was positively correlated with livestock rearing and traditional farming. 相似文献
1,3-Oxazines have a wide variety of biological activities. Naphthoquinone scaffolds also exhibit several biological responses such as antithrombotic, apoptosis and lipoxygenase inhibitors. There is, therefore, a need to develop efficient green methodologies for hybridizing the two scaffolds in a single entity. Herein, we report a novel protocol for the synthesis of 3-aryl-3,4-dihydro-2H-naphtho[2,3-e][1,3]oxazine-5,10-diones by one-pot three-component condensation of 2-hydroxy-1,4-naphthoquinone, aromatic amines and formaldehyde in glycerol at 50 °C. After separation of products, the glycerol–water layer was extracted using ethyl acetate and the dried glycerol layer was successfully reused several times. The products were obtained in 85–95 % yields in 5–10 min. This environmentally benign protocol holds advantages of high yields, operational simplicity and easy workup over our earlier report. 相似文献
The synthesis of high-molecular-weight lactic acid based polymers by chain linked polymerization was investigated. Lactic acid based hydroxyl terminated telechelic prepolymer was synthesized and then the molecular weight was increased by chain linked polymerization using methylene diphenyldiisocyanate. All polymerizations were carried out in the melt, using tin octoate as catalyst. The products were characterized by Differential scanning calorimetry, nuclear magnetic resonance spectroscopy and size exclusion chromatography. With the increase in diisocyanate concentration, an increase in the glass transition temperature, molecular weight and molecular weight distribution was observed. 相似文献
The planning and design of regional hazardous waste management system (RHWMS) involves selection of treatment and disposal facilities, allocation of hazardous wastes and waste residues from generator to the treatment and disposal sites and selection of the transportation routes. An improved formulation based upon multi-objective integer programming approach is presented to arrive at the optimal configuration of RHWMS components. This formulation addresses important practical issues like unique characteristics of the hazardous wastes reflecting on waste–waste and waste–technology compatibility. A utility function approach is presented to integrate both cost and risk related objectives. An illustrative case example is presented to demonstrate the usefulness of the improved formulation as a tool which can be used by environmental planning agencies in regional planning for hazardous waste management. 相似文献
Objective: Rapid urbanization and motorization without corresponding increases in helmet usage have made traumatic brain injury due to road traffic accidents a major public health crisis in Cambodia. This analysis was conducted to quantify the impact of helmets on severity of injury, neurosurgical indication, and functional outcomes at discharge for motorcycle operators who required hospitalization for a traumatic brain injury following a road traffic accident in Cambodia.
Methods: The medical records of 491 motorcycle operators who presented to a major tertiary care center in Cambodia with traumatic brain injury were retrospectively analyzed using multivariate logistic regression.
Results: The most common injuries at presentation were contusions (47.0%), epidural hematomas (30.1%), subdural hematomas (27.9%), subarachnoid hemorrhages (12.4%), skull fractures (21.4%), and facial fractures (18.5%). Moderate-to-severe loss of consciousness was present in 36.3% of patients. Not wearing a helmet was associated with an odds ratio of 2.20 (95% confidence interval [CI], 1.15–4.22) for presenting with moderate to severe loss of consciousness compared to helmeted patients. Craniotomy or craniectomy was indicated for evacuation of hematoma in 20.0% of cases, and nonhelmeted patients had 3.21-fold higher odds of requiring neurosurgical intervention (95% CI, 1.25–8.27). Furthermore, lack of helmet usage was associated with 2.72-fold higher odds of discharge with functional deficits (95% CI, 1.14–6.49). In total, 30.1% of patients were discharged with severe functional deficits.
Conclusions: Helmets demonstrate a protective effect and may be an effective public health intervention to significantly reduce the burden of traumatic brain injury in Cambodia and other developing countries with increasing rates of motorization across the world. 相似文献
Environmental Science and Pollution Research - Nanotechnology is a novel arena with promising applications in the field of medicine, industry, and agriculture including fisheries.... 相似文献
Sustainable procurement practices have gained popularity amongst both researchers and supply chain practitioners. However, ethical practices in sustainable procurement have been the topic of discussion in the recent years. The goal of the study is to scientifically build a green procurement framework by exploring relationship between buyer–supplier relationships, unethical practices and green design for sustainability. The study was conducted considering samples from South African steel and engineering sector. Data show high rate of wastages and losses occurring at various stages of steel and engineering supply chains. Every steel and engineering company aims to reduce such losses for improving their profitability and achieve sustainability. The empirical findings show that such wastage and losses can be minimised through efficient eco-design and involvement of key suppliers at the design stage so that disassembly, recycling and reuse options not only prove successful but as well cost-effective for the organisation. Also we find that buyer deceitful practices are a strong determinant of green design for sustainability. Buyers making up a second source of supply for green components and preferring green suppliers being approved by top management is helpful for mitigation of supply risks under green procurement process. The present study is distinctive in terms of coverage and its contribution to supply chain theory. 相似文献