Biodiesel production from a free fatty acid containing Karanja oil by a single-step heterogeneously catalyzed process

Karanja oil, containing 6.2% free fatty acids (FFAs), was considered for biodiesel production using a single-step solid-phase acid catalyzed process. Different types of zeolites and Amberlyst15 catalysts were tested and biodiesel was produced. Under similar conditions, the highest biodiesel yield was achieved using an Amberlyst15 catalyst, which contained 3–5% of moisture. The effects of operating parameters of the reaction such as reaction temperature, catalyst amount, and methanol-to-oil ratio were studied. An increase of methanol:oil ratio revealed a non-monotonic increase in biodiesel yields. Similar non-monotonic behavior was observed when Jatropha oil was used. Leaching and catalyst reusability were also considered. No significant effects of leaching were observed and catalyst reusability appeared to be affected by methanol interactions. The presence of a co-solvent, Tetrahydrofuran (THF), increased the biodiesel yield. Furthermore, an optimum amount of THF (THF:methanol volume ratio of 1:2) gave rise to the highest biodiesel yield. A biodiesel yield of 93% was achieved at 120 °C using a single-step process with Amberlyst15 as a catalyst, THF as a co-solvent, and a methanol:oil ratio of 30:1.     

Analysis of different nutrient status of liquid bio-fertilizer of different combinations of buffalo dung with gram bran and water hyacinth through vermicomposting by <Emphasis Type="Italic">Eisenia fetida</Emphasis>

The animal, agro-wastes and water hyacinth (Eichhornia crassipes) are a serious problem for the society and ecosystem. The present study carried out the management of water hyacinth and observation of nutritional status like pH, electrical conductivity (EC), total organic carbon (TOC), total Kjeldahl nitrogen (TKN), C/N ratio, total phosphorus and total calcium (TCa) of liquid bio-fertilizer (vermiwash) before and after vermicomposting of feed materials of different combinations of buffalo dung (BD) with water hyacinth (WH) and gram bran (GB). After vermicomposting of different combinations of BD with WH and agro-wastes, significant decrease in level of pH, EC, TOC and C/N ratio was observed, whereas significant increase in TKN, TK, TAP and TCa level in vermiwash of final vermicompost with respect to initial feed material was observed. The pH of initial mixture in all combinations has tended to basic in nature, while in final vermicompost, it becomes neutral/basic. The significant increase was observed in the level of TKN, TK, TAP in BD + GB + WH (1:2:1) and TCa in BD + GB + WH (1:1:2) vermiwash of final vermicompost of combination, whereas decrease was observed in TOC, C/N ratio, pH and EC in BD + WH (1:1), BD + GB + WH (1:1:1), BD + GB + WH (1:2:1) and BD + GB (1:1), respectively.     

Experimental evaluation of the catalytic efficiency of calcium based natural and modified catalyst for biodiesel synthesis

Transesterification of a mixture of vegetable oils with methanol using metal oxide catalysts derived from snail shell (SS) for biodiesel production was investigated. The metal oxides obtained from calcined snail shells in the temperature range of 650°–950 °C and modified by loading different potassium salts were used as a catalyst in the process. The catalysts were characterized by FT-IR, XRD, SEM-EDS, XPS and TGA. Catalytic activities of developed catalysts were also tested by Hammet indicator method and ion exchange method. The best calcination conditions were observed at 850°C for 4 hours based on biodiesel yield. The KF loaded snail shell gave highest biodiesel yield of 98 ± 1% in a batch reactor with highest basicity (15.9 mmoles/g) and basic strength measured by Hammet method. The optimized reaction conditions were: reaction temperature 65°C, reaction time 3 hours, methanol to oil molar ratio 9:1 and catalyst concentration 3wt%. Leaching and reusability tests confirm the stability of the catalyst as it encounters only 3% of leaching and small changes in catalytic activity up to five runs in terms of biodiesel yield.     

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu(2+) and Ni(2+) from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5-100mg/L. The pH of the solutions containing either Cu(2+) or Ni(2+) was varied over a range of 2-8. The adsorption of Cu(2+) and Ni(+2) on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu(2+) and 14.5mg/g for Ni(2+) at 298 K when the initial concentration for both Cu(2+) and Ni(2+) was 100mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.     

The adaptive capacity of institutions in Canada,Argentina, and Chile to droughts and floods

Regional Environmental Change - The increasing evidence of global warming calls on all states to enhance their adaptive capacity to deal with climate change. This paper compares the adaptive...     

Formaldehyde in indoor air: Sources and toxicity

Formaldehyde, a highly reactive gas with a pungent odor, is released from a variety of sources including urea-formaldehyde foam insulation, particle board, and plywood, as well as various combustion processes. Concentrations of formaldehyde associated with the presence of these products are higher indoors than outdoors. Under controlled conditions, formaldehyde causes eye and nasal irritation at air concentrations of 0.24 mg/m³ and above. Exposure, residential or occupational, has been associated with eye, nose, and throat irritation, coughing, wheezing, skin rashes, nausea, and other symptoms. Formaldehyde is also a sensitizer; Individuals who are allergic to formaldehyde, or who suffer from respiratory diseases, are likely to suffer the effects of formaldehyde at even lower concentrations. Based on its known metabolism, reactivity with DNA and other marcomolecules, as well as its mutagenic effects in many test systems, formaldehyde is thought to be genotoxic. Recent studies have indicated that formaldehyde is also a carcinogen in rats and probably in mice. Epidemiological studies to date have been inadequate to determine whether or not formaldehyde is a human carcinogen. Formaldehyde seems to be a direct acting carcinogen and it is likely to pose a carcinogenic risk to humans.