A new RFLP marker,SP282, at the btk locus for genetic analysis in X-linked agammaglobulinaemia families

X-linked agammaglobulinaemia is an inherited recessive disease in which the primary defect lies in the failure of pre-B cells to develop into mature circulating B cells, due to a defective B-cell cytoplasmic tyrosine kinase (btk). For this study we introduced a new RFLP marker, SP282, which is tightly linked to the XLA locus. In conjunction with the marker DXS178, SP282 was used to identify a carrier female and predict her male offspring to be normal. Subsequently the fetus was shown to have a normal number of circulating B cells, and at 2·5 years of age, the non-affected phenotype of the child was confirmed.     

Effect of lead on growth and nitrate assimilation of Vigna radiata (L.) Wilczek seedlings in a salt affected environment

The inhibition of seedling growth and nitrate reductase activity in 5 d old Vigna radiata (L.) Wilczek cv. Pusa Baisakhi in the presence of 1.0 mM lead acetate increased drastically, if NaCl (6 and 12 EC) was also present in the nutrient media along with the metal salt. Correspondingly higher endogenous Na+ levels were accumulated in the roots and leaves of seedlings in presence of the two stresses. On the other hand, the levels of endogenous lead get reduced in presence of NaCl in both the roots and leaves. Roots accumulated more Pb2+ and Na+ than the leaves. The two stresses affect more drastically in the additive or even synergistic manner during the early growth phase of the seedlings.     

Assessment of the effect of the toxicity of a textile dye on Nostoc muscorum ISU, a diazotrophic cyanobacterium

The impact of graded concentrations (5, 10, 15 and 20 mg dm(-3) of acid mordant Metomega Chrome Orange GL, a common dye used in woollen, carpet and textile industries, was studied on protein and pigment content and photosynthetic oxygen evolution in a diazotrophic cyanobacterium Nostoc muscorum. The lower concentration of 5 mg dm(-3) showed a negligible effect on protein and pigment content and photosynthetic oxygen evolution, whereas at higher concentrations a drastic decrease in the above parameters was observed. The highest concentration of 20 mg dm(-3) resulted in a decrease of protein, chlorophyll a, phycocyanin and carotenoid content by 72, 76, 54 and 17% of the control, respectively. Photosynthetic oxygen evolution also decreased by 92% of the control at this concentration of the dye.     

Chromium in tannery industry effluent and its effect on plant metabolism and growth

Different dilution levels of tannery treated effluent and their corresponding concentration of chromium (Cr6+) were studied in a petridish culture experiment on seed germination and seedling growth in radish (Raphanus sativus L). The different concentrations of Cr6+ (2, 5 and 10 ppm) and treated tannery effluent (10, 25 and 50%) showed reduction in seedling growth and related enzymatic activities with increase in concentration of Cr6+ in treatments and effluent both. The low concentration of chromium (2 ppm) and effluent dilution (10%) showed significant growth reduction separately. At this concentration of chromium and effluent dilution chlorophyll content, amylase, catalase and protein contents remained unchanged while with increase in Cr6+ concentration (>2ppm) and effluent dilution (> 10%) in treatments showed growth inhibitory effects.     

A heuristic for setting effective standards to ensure global environmental sustainability

Most environmental professionals and decision-makers, and certainly the public at large, hold the view that the integrity of earth’s natural environment will be conserved for posterity and sustainable development achieved if all the nations rigorously enforced their environmental and emission standards. It is argued in this paper that this view, sincerely held by many as an “axiomatic truth,” is mistaken and misplaced. This is because as a biogeochemical entity the Earth has limited self-regenerative capacity (SRC) to cope with anthropogenic pollution, and all kinds of environmental problems ensue when that limit is exceeded. Indeed, mounting environmental problems now occurring on all fronts amply testify to the fact that the limit has already been exceeded. They also provide necessary and sufficient proof that environmental and emission standards have been woefully inadequate for protecting earth’s natural environment and life-support systems. It is argued that true global environmental sustainability will be achieved, paving the way to true global sustainable development, if and only if global environmental and emission standards are set so that global anthropogenic pollution does not exceed the limit of earth’s natural SRC to cope with such pollution. These and related issues are discussed in this paper. A simple mathematical model using basic mathematics is also presented to explain how the phenomenon of “positive feedback” works in some of the environmental problems to exacerbate environmental degradation and progressively to erode nature’s SRC.

Translocation of metals from fly ash amended soil in the plant of Sesbania cannabina L. Ritz: effect on antioxidants

The plants of Sesbania cannabina Ritz grown on different amendments of fly ash (FA), have shown a high accumulation of metals (Fe, Mn, Zn, Cu, Pb and Ni). The highest accumulation of Fe the and lowest level of Ni were recorded in these plants. The different amendments of fly ash with garden soil (GS) were extracted with DTPA and the levels of metals were found to be decreased with an increase in fly ash application ratio from 10% to 50% FA. The analysis of the results showed an increase in the level of malondialdehyde (MDA) content of the roots for all the exposure periods. The maximum increases of 136% (roots) and 120% (leaves) were observed in MDA content at 100% FA after 30 d of growth of the plant, compared to GS. The level of antioxidants was found to increase for all the exposure periods in the roots of the plants to combat metal stress. At 30 d, the maximum increase of 57% (ascorbic acid) and 78% (free proline) was observed in the roots of the plants grown on 100% and 10% FA, respectively, as compared to their respective GS. At 90 d, a maximum increase of 42% (cysteine) and 117% (NPSH) was recorded in the roots of the plants grown on 25% and 100% FA, respectively, as compared to their respective GS. In leaves, a significant increase in antioxidants i.e. cysteine, NPSH and free proline content was recorded after 30 d, whereas no such trend was observed for the rest of the exposure periods. The chlorophyll and carotenoid contents increased with an increase in the FA amendment ratio from 10% to 50% FA for all the exposure periods as compared to GS. In both roots and leaves, the level of protein content increased in all the amendments and 100% FA at 30 d as compared to GS. Thus, there is a balance in the level of MDA content and level of antioxidants in the plants at 90 d. In view of its tolerance, the plants may be used for phytoremediation of metals from fly ash contaminated sites and suitable species for plantation on fly ash land fills.     

Performance of Pultruded Jute Fibre Reinforced Phenolic Composites as Building Materials for Door Frame

The pultruded jute/phenolic composites were aged under various humidity, hydrothermal and weathering conditions. Aging-induced effect of these conditions on the jute profiles was studied in terms of their physico-mechanical properties. It is observed that dimensional change of the profiles was only upto 4% even in an accelerated water aging condition. The effect of absorbed moisture/water on the jute profile was more pronounced in an accelerated water aging than the samples are being exposed to high humidity and alternate wetting and drying cycles. The changes in the values of internal bond strength of the profiles could be used as an indicator because of its sensitivity towards aging. Accentuation of fibres on the weathered samples along with severe resin erosion has suggested to layer the surface of the profiles with rich resin prior to use in the outdoor. The properties of jute profile door frame were satisfactory when compared with the requirements mentioned in IS: 4021–83 – Indian standard specification for timber door, window and ventilator frames. Performance of the installed door frame has shown no sign of dimensional instability in terms of warping and bulging after 3 years. It is suggested that jute door frames could be used as an alternative to the wooden door frames in buildings.     

A Simple Model to Determine In Situ Mixing Height Growth from Surface Measurements

A generic In Situ Mixing Height Growth (IMG) model, capable of predicting the real-time growth of the mixed layer and its diurnal evolution from routinely observed simple surface meteorological is developed. The algorithm for the determination of temporally growing daytime mixing height includes both convective and mechanical turbulence contributions. It accounts for neutral as well as height varying potential temperature gradients above the mixed layer. For thermally stable and mechanically dominated unstable night time Atmospheric Boundary Layer (ABL) the module uses similarity formulae based on the wind velocity [1]), the Monin—Obukhov length [2], and the Coriolis parameter. In the convective case simple slab model is integrated, based on initial lapse rate and the surface heat flux. The lapse rate is evaluated on the basis of vertical atmospheric stability, surface type and surface temperature. This differentiates the IMG model from other existing mixing height models that need initial measured lapse rate for calculation. IMG model is site specific as it calculates the radiative incoming heat flux depending on the solar declination estimates based on-site latitude and longitude. The IMG model is applied to calculate mixing height for India by using surface data (viz. wind speed, surface temperature, surface type) from 152 surface meteorological stations. Results have been evaluated with radiosonde mixing height data procured from 18 upper air stations. Sensitivity analysis of the model with respect to various parameters is performed. The model is formulated after reviewing presently available radiosonde mixing height data in India and can satisfactorily provide an alternative means of estimating mixing height for air pollution dispersion models.