Personal exposure measurement of students to various microenvironments inside and outside the college campus

This study characterizes the exposure of a typical Indian Institute of Technology Kanpur student to particulate matter and gaseous co-pollutants like carbon monoxide, volatile organic compounds, and nitrogen dioxide in various microenvironments, within and outside the college campus. Chemical analysis of filter, used for the particulate matter measurement, was also carried out to determine the concentration of various elements such as Ca, Cd, Cr, Cu, Fe, Mg, Pb, Zn, and anions like F^?, Cl^?, NO₃ ^?, and SO₄ ^2?. Furthermore, time activity diary along with temperature data was maintained for the precise evaluation and analysis of results for various microenvironments. The results showed PM₁₀ and PM_2.5 concentrations to be higher at some outdoor microenvironments, particularly near the Ganga riverbank. From the chemical analysis, concentrations of chloride and fluoride were found higher in indoor microenvironments as compared to outdoors. Also, nitrate concentrations were quite higher within the laboratory premises. Concentrations of Ca, Fe, and Mg were significant outdoors, whereas Na, Ca, Fe, and K were prominent indoors. The study highlights the real-time personal exposure of a student cohort to various toxic pollutants typically found within their breathing levels and their potential sources both indoors and outdoors.     

Assessment of flubendiamide residues in pigeon pea in different agro-climatic zones of India

Supervised field trials were conducted at the research farms of four agricultural universities located at different agro-climatic zones of India to find out the harvest time residues of flubendiamide and its des-iodo metabolite on pigeon pea (Cajanus cajan) during the year 2006-2007. Two spray applications of flubendiamide 20 WDG at 50 g (T(1)) and 100 g (T(2)) a.i./ha were given to the crop at 15-days interval. The foliage samples at different time intervals were drawn at only one location, however, the harvest time samples of pigeon pea grain, shell, and straw were drawn at all the four locations. The residues were estimated by HPLC coupled with UV-VIS variable detector. No residues of flubendiamide and its des-iodo metabolite were found at harvest of the crop at or above the LOQ level of 0.05 μg/g. On the basis of the data generated, a pre-harvest interval (PHI) of 28 days has been recommended and the flubendiamide 20 WDG has been registered for use on pigeon pea by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India and the MRL has been fixed by Ministry of Health and Family Welfare, Government of India under Prevention of Food and Adulteration as 0.05 μg/g on pigeon pea grains.     

Chemical characteristics of aerosols and trace gas distribution over North and Central India

A field campaign on aerosol chemical properties and trace gases measurements was carried out along the Delhi-Hyderabad-Delhi road corridor (spanning about 3,200 km) in India, during February 1-29, 2004. Aerosol particles were collected on quartz and cellulose filters using high volume (PM(10)) sampler at various locations along the route (i.e., urban, semi-urban, rural, and forest areas) and have been characterized for major cations (Na(+), Ca(2+), Mg(2+), K(+), and NH (4) (+)), anions (Cl(-), NO (3)(-), and SO (4)(2-)), and heavy metals (Cu, Cd, Fe, Zn, Mn, and Pb). Simultaneously, we measured NO(2) and SO(2) gases. These species show large spatial and temporal variations. The ambient PM(10) concentration has been observed to be the highest (55 ± 4 μg m(-3)) near semi-urban areas followed by forest areas (48 ± 2 μg m(-3)) and in rural areas (44 ± 22 μg m(-3)). The concentrations of NO( x ) (NO(2)+NO) and SO(2) ranged from 16 to 69 μg m(-3) and 4 to 11 μg m(-3), respectively. Among anions, NO(3)(-) and SO(4) (2-) are the major constituents of PM(10). The urban and semi-urban sites showed enhanced concentrations of Fe, Zn, Mn, Cd, and Pb. This study provide information about atmospheric concentrations of various species in the northern to central India, which may be important for policy makers to better understand the air quality of the region.     

Persistence and vertical distribution of termiticide fipronil in modified ground board test

Fipronil termiticide belongs to phenyl-pyrazole class of chemical compounds. It has broad-spectrum activity particularly against house hold pests such as cockroaches, mosquitoes, locusts, ticks, and fleas at both larval and adult stages. At high dosage it can be used to control subterranean termites in building foundations. To evaluate long term efficacy against termites the persistence and vertical distribution of fipronil was studied under natural weather conditions of Dehradun, India. Fipronil was applied at four concentrations i.e. 0.05, 0.1, 0.25 and 0.5% a.i ha⁻¹ by drenching 17 × 17 in.² plot prepared as per modified ground board test. Soil samples were collected after 22, 38 and 56 months of treatment up to the depth of 75 cm. The soil core was cut into five distinct sections i.e. 0–15, 15–30, 30–45, 45–60 and 60–75 cm depth. The residues were extracted by shaking 20 g soil sample with acetone. The acetone extract was concentrated and cleaned-up over florisil column. Fipronil residues were estimated on GLC at 220, 260, and 300°C oven, injector and detector temperature respectively. Fipronil was found to persist beyond 56 months after application. Two metabolites viz. desulfinyl and sulfide-fipronil were detected in sampling after 22 months of application that also dissipated with time. Fipronil residues were found up to 60 cm depth. The residues in deeper layers dissipate slowly with time and after 56 months of treatment residues were detected only up to 30 cm depth.     

Predicting dissolved oxygen concentration using kernel regression modeling approaches with nonlinear hydro-chemical data

Kernel function-based regression models were constructed and applied to a nonlinear hydro-chemical dataset pertaining to surface water for predicting the dissolved oxygen levels. Initial features were selected using nonlinear approach. Nonlinearity in the data was tested using BDS statistics, which revealed the data with nonlinear structure. Kernel ridge regression, kernel principal component regression, kernel partial least squares regression, and support vector regression models were developed using the Gaussian kernel function and their generalization and predictive abilities were compared in terms of several statistical parameters. Model parameters were optimized using the cross-validation procedure. The proposed kernel regression methods successfully captured the nonlinear features of the original data by transforming it to a high dimensional feature space using the kernel function. Performance of all the kernel-based modeling methods used here were comparable both in terms of predictive and generalization abilities. Values of the performance criteria parameters suggested for the adequacy of the constructed models to fit the nonlinear data and their good predictive capabilities.     

Seasonal perspective of dietary arsenic consumption and urine arsenic in an endemic population

Exposure to arsenic in arsenic endemic areas is most remarkable environmental health challenges. Although effects of arsenic contamination are well established, reports are unavailable on probable seasonal variation due to changes of food habit depending on winter and summer seasons, especially for endemic regions of Nadia district, West Bengal. Complete 24-h diets, drinking–cooking water, first morning voided urine samples, and diet history were analyzed on 25 volunteers in arsenic endemic Chakdah block of Nadia district, once in summer followed by once in winter from the same participants. Results depicted no seasonal variation of body weight and body mass index. Arsenic concentration of source drinking and cooking water decreased (p?=?0.04) from 26 μg L^?1 in summer to 6 μg L^?1 in winter season. We recorded a seasonal decrease of water intake in male (3.8 and 2.5 L day ^?1) and female (2.6 and 1.2 L day^?1) participants from summer to winter. Arsenic intake through drinking water decreased (p?=?0.04) in winter (29 μg day^?1) than in summer (100 μg day^?1), and urinary arsenic concentration decreased (p?=?0.018) in winter (41 μg L^?1) than in summer (69 μg L^?1). Dietary arsenic intake remained unchanged (p?=?0.24) over the seasons. Hence, we can infer that human health risk assessment from arsenic needs an insight over temporal scale.     

Seasonal variations and source profile of <Emphasis Type="Italic">n</Emphasis>-alkanes in particulate matter (PM<Subscript>10</Subscript>) at a heavy traffic site,Delhi

Delhi is one of the most polluted cities in the world. The generation of aerosols in the lower atmosphere of the city is mainly due to a large amount of natural dust advection and sizable anthropogenic activities. The compositions of organic compounds in aerosols are highly variable in this region and need to be investigated thoroughly. Twenty-four-hour sampling to assess concentrations of n-alkanes (ng/m³) in PM₁₀ was carried out during January 2015 to June 2015 at Indira Gandhi Delhi Technical University for Women (IGDTUW) Campus, Delhi, India. The total average concentration of n-alkanes, 243.7 ± 5.5 ng/m³, along with the diagnostic tools has been calculated. The values of CPI₁, CPI₂, and CPI₃ for the whole range of n-alkanes series, petrogenic n-alkanes, and biogenic n-alkanes were 1.00, 1.02, and 1.04, respectively, and C _max were at C₂₅ and C₂₇. Diagnostic indices and curves indicated that the dominant inputs of n-alkanes are from petrogenic emissions, with lower contribution from biogenic emissions. Significant seasonal variations were observed in average concentrations of n-alkanes, which is comparatively higher in winter (187.4 ± 4.3 ng/m³) than during the summer season (56.3 ± 1.1 ng/m³).     

Microbial regeneration of spent activated carbon dispersed with organic contaminants: mechanism, efficiency, and kinetic models

Background and purpose

Regeneration of spent activated carbon assumes paramount importance in view of its economic reuse during adsorptive removal of organic contaminants. Classical thermal, chemical, or electrochemical regeneration methods are constrained with several limitations. Microbial regeneration of spent activated carbon provides a synergic combination of adsorption and biodegradation.

Methods

Microorganisms regenerate the surface of activated carbon using sorbed organic substrate as a source of food and energy. Aromatic hydrocarbons, particularly phenols, including their chlorinated derivatives and industrial waste water containing synthetic organic compounds and explosives-contaminated ground water are the major removal targets in adsorption?Cbioregeneration process. Popular mechanisms of bioregeneration include exoenzymatic hypothesis and biodegradation following desorption. Efficiency of bioregeneration can be quantified using direct determination of the substrate content on the adsorbent, the indirect measurement of substrate consumption by measuring the carbon dioxide production and the measurement of oxygen uptake. Modeling of bioregeneration involves the kinetics of adsorption/desorption and microbial growth followed by solute degradation. Some modeling aspects based on various simplifying assumptions for mass transport resistance, microbial kinetics and biofilm thickness, are briefly exposed.

Results

Kinetic parameters from various representative bioregeneration models and their solution procedure are briefly summarized. The models would be useful in predicting the mass transfer driving forces, microbial growth, substrate degradation as well as the extent of bioregeneration.

Conclusions

Intraparticle mass transfer resistance, incomplete regeneration, and microbial fouling are some of the problems needed to be addressed adequately. A detailed techno-economic evaluation is also required to assess the commercial aspects of bioregeneration.     

Groundwater Quality Assessment of Tehsil Kheragarh, Agra (India) with Special Reference to Fluoride

Fluoride concentration and other parameters in groundwater from 261 villages in Tehsil Kheragarh of District Agra were assessed and attempts were made to observe the relationship between fluoride and other water quality parameters. Of 658 groundwater samples (collected from separate sources) analysed for fluoride, 27% were in the range of 0–1.0 mg/L, 25% in 1.0–1.5 mg/L, 32% in1.5–3.0 mg/L and 16% above 3.0 mg/L. The highest fluoride concentration recorded was 12.80 mg/L. Significant correlation of fluoride with pH, alkalinity, Na, SiO₂ and PO₄ were observed. Factor analysis was also attempted in order to identify the contributing sources.     

Air pollution perception in ten countries during the COVID-19 pandemic

As largely documented in the literature, the stark restrictions enforced worldwide in 2020 to curb the COVID-19 pandemic also curtailed the production of air pollutants to some extent. This study investigates the perception of the air pollution as assessed by individuals located in ten countries: Australia, Brazil, China, Ghana, India, Iran, Italy, Norway, South Africa and the USA. The perceptions towards air quality were evaluated by employing an online survey administered in May 2020. Participants (N = 9394) in the ten countries expressed their opinions according to a Likert-scale response. A reduction in pollutant concentration was clearly perceived, albeit to a different extent, by all populations. The survey participants located in India and Italy perceived the largest drop in the air pollution concentration; conversely, the smallest variation was perceived among Chinese and Norwegian respondents. Among all the demographic indicators considered, only gender proved to be statistically significant.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01574-2.