Sustainable development in the BRICS countries: an efficiency analysis by data envelopment

There is much concern about the social and environmental impacts caused by the economic growth of nations. Thus, to evaluate the socio-economic performance of nations, economists have increasingly addressed matters related to social welfare and the environment. It is within the scope of this context that this work discusses the performance of countries in the BRICS group regarding sustainable development. The objective of this study regards evaluating the efficiency of these countries in transforming productive resources and technological innovation into sustainable development. The proposed objective was achieved by using econometric tools as well as the data envelopment analysis method to then create economic, environmental, and social efficiency rankings for the BRICS countries, which enabled to carry out comparative analyses on the sustainable development of those countries. The results of such assessments can be of interest for more specific scientific explorations.     

Quantifying the effect of wind on internal wave resonance in Lake Villarrica,Chile

Lake Villarrica, located in south central Chile, has a maximum depth of 167 m and a maximum fetch of about 20 km. The lake is monomictic, with a seasonal thermocline located at a depth of approximately 20 m. Field data show the presence of basin-scale internal waves that are forced by daily winds and affected by Coriolis acceleration. A modal linear and non-linear analysis of internal waves has been used, assuming a two-layer system. The numerical simulations show good agreement with the internal wave field observations. The obtained modes were used to study the energy dissipation within the system, which is necessary to control the amplitude growth. Field data and numerical simulations identify (1) the occurrence of a horizontal mode 1 Kelvin wave, with a period of about a day that coincides with the frequency of daily winds, suggesting that this mode of the Kelvin waves is in a resonant state (subject to damping and controlled by frictional effects in the field) and (2) the presence of higher-frequency internal waves, which are excited by non-linear interactions between basin-scale internal waves. The non-linear simulation indicates that only 10 % of the dissipation rate of the Kelvin wave is because of bottom friction, while the rest 90 % represents the energy that is radiated from the Kelvin wave to other modes. Also, this study shows that modes with periods between 5 and 8 h are excited by non-linear interactions between the fundamental Kelvin wave and horizontal Poincaré-type waves. A laboratory study of the resonant interaction between a periodic forcing and the internal wave field response has also been performed, confirming the resonance for the horizontal mode 1 Kelvin wave.     

Layer-by-Layer Deposition of Antibacterial Polyelectrolytes on Cotton Fibres

The introduction of molecules with biological properties on textile materials is essential for a number of biotechnological applications. With the purpose of testing new processes applied to textiles, in this study, we present the first results on the feasibility of using the Layer-by-Layer (LbL) deposition process in natural fibers such as cotton, with natural polyelectrolytes like chitosan (CH) and alginic acid sodium salt (ALG), the durability of CH/ALG multilayer on cotton were evaluated. The increase of negative charges to the substrate cotton was made with NaBr and TEMPO, to ensure the success of the process of LbL. Three characterization methods to assess electrostatic LbL deposition were performed: the contact angle between a liquid (water) and the sample surface, in order to characterize the wettability of the samples with the different layers of CH and ALG; dyeing of the CH/ALG assembled cotton fabric with cationic methylene blue that shows regular changes in terms of color depth (K/S value), which indicate that the surface were alternately deposited with CH and ALG layers and, finally, the analysis by infrared spectroscopy using Fourier Transform with Attenuated Total Reflection (ATR-FTIR), to assess the changes in the interaction between CH and ALG deposited on cotton samples.     

Quantitative assessment of the differential coastal vulnerability associated to oil spills

The risk associated with a given hazard (natural or technological) generally results from the interaction between the hazard potential and the vulnerability. This paper is centred on the assessment of the vulnerability variable. A quantitative vulnerability assessment and mapping methodology is proposed, with two main specificities: (1) it is hazard- and spatially-centred (respectively, oil spills and coastal areas) and; (2) the spatial segregation level used is the municipality. Due to the geographic context of the Portuguese mainland coast, the proposed methodology was applied in an attempt to illustrate the spatial distribution and the degree of the vulnerability associated to oil spills for mainland Portugal coastal municipalities. A final map is presented together with other informative elements. Analysis and discussion of the results allows for the understanding that: (1) there is a very heterogeneous and differential distribution of the degree of vulnerability to oil spills along the Portuguese coastline; (2) the application of specific hazard-centred and spatially-centred vulnerability assessment methodologies, comprising multi-dimensional indicators (e.g., geographic, ecological, demographic, social and economic), produces more robust and realistic results, highlighted by a thorough and spatially detailed analysis; and (3) future research is required on vulnerability assessment in Portugal; along side, hazard potential assessment methodologies must also be developed in order to create a final risk profile, which can be an extremely useful tool in spatial planning and management.     

Joint use of data and modeling in coastal wave transformation

In the framework of a research project entitled ??BRISA??BReaking waves and Induced SAnd transport??, a methodology was devised to characterize the waves joining together in-situ measurements and numerical wave propagation models. With this goal in mind, a number of in-situ measurements were made, for selected positions in front of Praia de Faro (South Portugal), during four days (25th to 28th March, 2009) by using different types of equipments (e.g., resistive wave gauges, pressure sensors, currentmeters and a new prototype pore pressure sensor using optical fibre). Wave records were obtained simultaneously offshore (at a water depth of 11.7?m below mean sea level, MSL) and at the surf and swash zones. The data processing and analysis were made by applying classical time domain techniques. Numerical simulations of the wave propagation between offshore and inshore for the measurement period were performed with two numerical models, a 1D model based on linear theory and a nonlinear Boussinesq-type model, COULWAVE, both forced by the measured offshore wave conditions of 27th March 2009. Comparisons between numerical results and field data for the pressure sensors placed in the surf and swash zones were made and discussed. This approach enables to evaluate the performance of those models to simulate those specific conditions, but also to validate the models by gaining confidence on their use in other conditions.     

Towards the development of an operational tool for oil spills management in the Algarve coast

Portugal is strongly vulnerable to sea hazards due to intense vessel traffic and sea conditions. The southwest region off the Iberian Peninsula lies in the main route from the Mediterranean and Southern Hemisphere to the Northern Europe, causing a ship concentration in a narrow band off Cape S?o Vicente. Tankers represent a significant part of the vessel traffic and the occurrence of oil spills cannot be disregarded. Cape S?o Vicente region is part of a Natural Park with 110 Km of coastline, integrated in the European Natura 2000 network and its socio-economic context is closely related with sea resources exploitation, particularly fishing and tourism. Recognizing the importance of accurate information systems for the decision making process in an oil spill situation, this work presents the development of an integrated tool to support the process in the Algarve coast. The system relies in a regional operational mathematical model based on the MOHID modelling system. The system core is composed by three models (3D hydrodynamics, wave and Lagrangian transport) all linked in the same system and exchanging information in real time. Oil advection and weathering processes are coupled to the Lagragian transport model. The overall operational system includes external operational data products as inputs, to ensure a successful validation of the results. The system is linked to stakeholders and response authorities using a geographic referenced database based on Mapserver technology that will include relevant information for oil spill management.     

Study of worker’s exposure to Tantalum-bearing particles in a mining and metallurgical plant

Environmental Geochemistry and Health - The objective of this study was to assess worker exposure to mineral dust particles, and a metabolic model, based on the model adopted by ICRP, was applied...     

Molecular insight into the population structure of common and spotted dolphins inhabiting the pelagic waters of the Northeast Atlantic

Several cetacean species exhibit fine-scale population structure despite their high dispersal capacities and the apparent continuity of the marine environment. In dolphins, most studies have focused on coastal areas and continental margins, and they revealed differentiated populations within relatively small geographic areas, sometimes in conjunction with a specialisation for different habitats (ecotypes). We analysed the population genetic structure of short-beaked common dolphins (Delphinus delphis) and Atlantic spotted dolphins (Stenella frontalis) in the Azores and Madeira, the two most isolated archipelagos of the North Atlantic. The archipelago of the Azores is divided into three groups of islands and stands 900 km away from Madeira. It is not known whether individuals migrate between groups of islands and archipelagos, nor whether distinct ecotypes are present. These questions were investigated by genetic analyses of 343 biopsy samples collected on free-ranging dolphins. The analyses consisted in sequencing part of the mitochondrial hyper-variable region, screening up to 14 microsatellite loci, and molecular sexing. Results did not unravel any population structure at the scale of the study area. Lack of differentiation matches expectations for spotted dolphins, which are transient in both archipelagos, but not for common dolphins, which are present year-round in the Azores and potentially resident. Absence of genetic structure over hundreds and even thousands of kilometres implies the existence of gene flow over much larger distances than usually documented in small delphinids, which could be achieved through individual movements. This finding indicates that population structure in oceanic habitat differs from that observed in coastal habitat.     

A three-isotope approach to disentangling the diet of a generalist consumer: the yellow-legged gull in northwest Spain

The widespread omnivory of consumers and the trophic complexity of marine ecosystems make it difficult to infer the feeding ecology of species. The use of stable isotopic analysis plays a crucial role in elucidating trophic interactions. Here we analysed δ¹⁵N, δ¹³C and δ³⁴S in chick feathers, and we used a Bayesian triple-isotope mixing model to reconstruct the diet of a generalist predator, the yellow-legged gull (Larus michahellis) that breeds in the coastal upwelling area off northwest mainland Spain. The mixing model indicated that although chicks from all colonies were fed with a high percentage of fish, there are geographical differences in their diets. While chicks from northern colonies consume higher percentages of earthworms, refuse constitutes a more important source in the diet of chicks from western colonies. The three-isotope mixing model revealed a heterogeneity in foraging habitats that would not have been apparent if only two stable isotopes had been analysed. Moreover, our work highlights the potential of adding δ³⁴S for distinguishing not only between terrestrial and marine prey, but also between different marine species such as fish, crabs and mussels.     

Estimating the influence of overhead transmission power lines and landscape context on the density of little bustard Tetrax tetrax breeding populations

Collision with conductors and earth cables is a known impact generated by transmission power lines, however there is virtually no information on how these infrastructures might affect bird distribution in a landscape context. With this work we specifically hypothesise that transmission power lines may affect the occurrence of a threatened bird, the little bustard (Tetrax tetrax). To test this hypothesis we used a Stochastic Dynamic Methodology (StDM), analysing the effects of power lines in a landscape perspective and simulating population trends as a response to power line installation and habitat changes induced by agricultural shifts in southern Portugal. The data used in the dynamic model construction included relevant gradients of environmental conditions and was sampled during the breeding seasons of 2003-2006. Transmission power lines were significantly avoided by the little bustard and the developed StDM model showed that the distance to these utility structures is the most important factor determining breeding densities in sites with suitable habitat for the species, which possibly leads to displacement of populations and habitat fragmentation. The model simulations also provided the base to analyse the cumulative effects caused by the habitat degradation that can ultimately lead to the extinction of local populations. Within priority conservation sites, the dismantling of existing transmission lines should be considered whenever possible, in order to ensure adequate breeding habitat. The model is considered useful as an auxiliary tool to be used in environmental impact assessments, management and conservation studies.