Modeling of n-butane ignition, combustion, and preflame oxidation in the 20-l vessel

The objective of the study reported herein is to simulate various physical and chemical phenomena accompanying fuel-rich n-butane–oxygen mixture preparation, ignition, preflame oxidation, and combustion in the standard 20-l explosion vessel, by applying mathematical models. Based on the computational fluid dynamics (CFD) simulations of the mixing process and natural convection of the ignition kernel, as well as on the analysis of the detailed reaction mechanism of n-butane oxidation, laminar flame propagation, and self-ignition, possible explanations for the phenomena observed experimentally have been suggested. The results of the study indicate that seemingly inflammable mixtures can become hazardous depending on the mixture preparation procedure and forced ignition timing.     

Determination of turbulent burning velocities of dust air mixtures with the open tube method

Correlating turbulent burning velocity to turbulence intensity and basic flame parameters-like laminar burning velocity for dust air mixtures is not only a scientific challenge but also of practical importance for the modelling of dust flame propagation in industrial facilities and choice of adequate safety strategy. The open tube method has been implemented to measure laminar and turbulent burning velocities at laboratory scale for turbulence intensities in the range of a few m/s. Special care has been given to the experimental technique so that a direct access to the desired parameters was possible minimising interpretation difficulties. In particular, the flame is propagating freely, the flame velocity is directly accessible by visualisation and the turbulence intensity is measured at the flame front during flame propagation with special aerodynamic probes. In the present paper, those achievements are briefly recalled. In addition, a complete set of experiments for diametrically opposed dusts, starch and aluminium, has been performed and is presented hereafter. The experimental data, measured for potato dust air mixtures seem to be in accordance with the Bray Gülder model in the range of 1.5 m/s<u′<3.5 m/s. For a further confirmation, the measurement range has been extended to lower levels of turbulence of u′<1.5 m/s. This could be achieved by changing the mode of preparation of the dust air mixture. In former tests, the particles have been injected into the tube from a pressurised dust reservoir; for the lower turbulence range, the particles have been inserted into the tube from above by means of a sieve–riddler system, and the turbulence generated from the pressurised gas reservoir as before. For higher levels of turbulence, aluminium air mixtures have been investigated using the particle injection mode with pressurised dust reservoir. Due to high burning rates much higher flame speeds than for potato dusts of up to 23 m/s have been obtained.     

A narrative perspective on institutional work in environmental governance – insights from a beach nourishment case study in Sweden

Institutional work offers a promising lens for understanding institutional change, focusing on the efforts of actors in creating, maintaining or disrupting institutions. In this paper, we explore the capacity of a narrative approach to provide insights on institutional work, using a case study from the coast of Sweden. We identify four narratives that compete in the policy discourse regarding erosion and beach nourishment in the coastal province of Scania. The narratives reveal that actors hold different beliefs concerning the magnitude of the erosion problem, the division of responsibilities and the suitability of sand nourishment as a coastal protection measure. The narrative competition is considered reflective of past institutional discussions and ongoing institutional work in coastal management in Scania, confirming that narratives are used as sense-making and meaning-giving devices in institutional discussions.     

Stress among air traffic controllers: Occupational sources of coronary heart disease risk

This study attempts to assess the sources of occupational stress on air traffic controllers. It is based on data collected from a majority of air traffic controllers at a large U.K. airport. There are two unique methodological features described in this article. First, the use of the repertory grid technique as a method of generating work stressor variables, and second, the use of the multiple logistic equation as a coronary heart disease risk index.     

EVALUATION OF COPPER ACCUMULATION IN PART OF THE CALIFORNIA AQUEDUCT1

ABSTRACT: Copper sulfate has been used extensively in the California Aqueduct to control phytoplankton and the alga Cladophora. Since 1969 more than 250,000 pounds of copper sulfate has been added to a part of the aqueduct. Although copper sulfate is effective in controlling algae, copper tends to accumulate in the system in which it is applied. Samples of water, biota including plants, clams, and snails, as well as sediment were analyzed for copper. Results of these analyses showed that copper concentrations in the water, with three exceptions, were less than 10 micrograms per litre. Samples of plant tissue showed a 198 percent increase in copper concentration in the treated reach of the aqueduct, and clam tissue showed a 68 percent increase. Snails in the treated reach had 77 percent more copper than in the untreated reach whereas copper concentrations in the sediment doubled. None of the concentrations found are considered to be harmful to the biota.     

Fish bioassay monitoring of waste effluents

Spills of toxic materials into bodies of water receiving industrial waste discharges can be prevented only if frequent or continuous assessments of effluent quality can be made. Currently available methods can automatically measure individual physical or chemical waste components but cannot assess toxicity caused by the interaction of components or the presence of an unsuspected material. Aquatic organisms, in contrast, respond to their total environment and in this way integrate the effects of all the various chemical and physical waste parameters.This study evaluates the possibility of using the continuously and automatically recorded responses of fish to monitor the toxicity of industrial waste effluents. A review of previously developed toxicity monitoring systems is followed by a field evaluation of a method that uses the computer-monitored ventilatory patterns of 12 bluegills (Lepomis macrochirus Rafinesque) to monitor the toxicity of an industrial waste effluent as it flows into a river. No known toxic spills occurred in the effluent during the operation of this system, but acetone added to the effluent waste caused responses from the fish at concentrations which peaked near the 96-hr LC₅₀ level. Some responses were also noted when no known toxicant was present; these were related to environmental disturbances and system design problems. Recommendations are made for the design of future biologic monitoring units.     

Multiresource simulation for wildland management

The model presented here is a simulation of the watershed of the Little South Fork of the Cache la Poudre River system located in the Front Range of the Rocky Mountains of Colorado. This simulation model, TERRA, provides information of resource interactions, ecosystem processes, and harvest ramifications for this watershed. The information is generated through sets of difference equations to represent process flows. The model has a modular design that separates the ecologic processes—weather conditions, hydrologic functions, forage and timber production, wildlife and domestic population dynamics, recreation use, and management activities—from the simulation planning overhead—updating, plotting, and printing.The model is designed such that the output is readily usable information for an allocation model and the decision-making process. This is accomplished by allowing different levels of specified management activities as input and producing responses and output on a per unit land area basis.This simulation is a useful research tool for estimating parameter and variable values and levels of management-resource interaction. Lack of a pertinent field data base inhibits the model from actually being used as a management tool in the planning process.Submitted for publication as Paper No. 1217 in the Journal Series of the Agricultural Experiment Station, University of Florida.     

Trail erosion patterns in Great Smoky Mountains National Park

All the maintained trails in Great Smoky Mountains National Park were surveyed for width, depth, and a variety of types of erosion. Trail erosion is related to a number of environmental variables, including vegetation type, elevation, trail slope, and section of the park. Open grass balds and spruce-fir forest are the most erosion-sensitive plant communities, and the xeric oak and pine types are the least sensitive. Trails in virgin or mature forest tend to be in poorer condition than those in successional areas. The most important physical factor is the slope of the trail.Trails in the Tennessee district are in slightly poorer condition, on the average, than those in the North Carolina district, but the Appalachian Trail is more eroded than either. A poor section of the park may have ten times the erosion of a good section. On an allpark basis, water erosion is the most important problem, with 15% of the trail surface affected.A comparison of visitation patterns with trail condition indicates that redistribution of use would help to mitigate some erosion problems. Because trail condition is correlated to physical environmental factors, however, some sites will require intensive maintenance, even if visitation is low.The data from this survey have already been used in environmental analysis of proposed developments within the park and can be applied to long-range planning for the park trail system as a whole.