Spatial sampling and the environment: some issues and directions

In this paper we summarize research issues for spatial environmental sampling stemming from a NISS/USEPA workshop held on 21-22 September 1994 at Chapel Hill, NC.     

Observations on the function of the glands of the foot of the pediveliger of Ostrea edulis during settlement

The use during settlement of secretions of the 9 different types of gland in the foot of the pediveliger of Ostrea edulis L. was examined experimentally. During settlement, there is a progressive decrease in the crawling speed of the larva and a strengthening of its bond with the substratum. Both changes are related to (a) a change from ciliary to muscular pedal locomotion; (b) the increasing acidity and viscosity of the mucoid secretions used; (c) the secretion of a byssus thread by the glands of the byssus duet; (d) changes in the form and composition of this byssus. At the termination of settlement, the entire contents of 2 types of gland are discharged. Their secretions give rise to the cement which permanently fixes the larva to the substratum. The 9 types of gland are utilised sequentially in a manner closely related to the 6 phases recognised in settlement behaviour.     

Electrochemical oxidation of bisphenol A. Application to the removal of bisphenol A using a carbon fiber electrode

Leachate samples with a high strength of ammonium-nitrogen (NH4+-N) were collected from a local landfill site in Hong Kong. Two experiments were carried out to study (1) the inhibition of microbial activity of activated sludge by NH4+-N and (2) the chemical precipitation of NH4+-N from leachate as a preliminary treatment prior to the activated sludge process. The experimental results demonstrated that the efficiency of COD removal decreased from 97.7% to 78.1%, and the dehydrogenase activity of activated sludge decreased from 9.29 to 4.93 microg TF/mg MLSS, respectively, when the NH4+-N concentration increased from 53 to 800 mg/l. The experiment also demonstrated that the NH4+-N in the leachate can be quickly precipitated as MgNH4PO4 x 6H2O after addition of MgCl2 x 6H2O + Na2HPO4 x 12H2O. The NH4+-N concentration was reduced from 5618 to 112 mg/l within 15 min when a molar ratio of Mg2+:NH+:PO4(3-) = 1:1:1 was used. The optimum pH to reach the minimum solubility of MgNH4PO4 x 6H2O was found to be in the range of 8.5-9.0. Attention should be given to the high salinity formed in the treated leachate by using MgCl2 x 6H2O + Na2HPO4 x 12H2O, which may affect microbial activity in the following biological treatment processes. Using two other combinations of chemicals [MgO + 85%H3PO4 and Ca(H2PO4)2 x H2O + MgSO4 x 7H2O] could minimise salinity generation after precipitation, while they were less efficient for NH4+-N removal.     

Municipal solid waste characteristics and management in China

The purpose of this investigation is to evaluate the current status and identify the problems of municipal solid waste (MSW) management in China in order to determine appropriate remedial strategies. This is the first of two papers, discussing primarily the general characteristics of MSW and its management in China. The second paper focuses on specific remedial strategies. MSW generation in China has increased rapidly in the past 20 years from 31.3 million tons in 1980 to 113.0 million tons in 1998. The annual rate of increase is 3-10%. The average generation per capita is 1.0 kg/day (0.38 t/year). Nearly one-half of the waste generated is dumped in the suburbs, where the accumulated quantity has reached 6 billion tons, which has caused heavy environmental pollution. This paper provides information on MSW management in China, such as MSW generation and its physical, chemical, and biological properties. Low calorific value and high moisture content characterize China's municipal waste. Other issues related to MSW management in China are also discussed, including the factors that influence MSW generation quantity and     

Effects of the insect growth regulator (S)-methoprene on survival and reproduction of the freshwater cladoceran Moina macrocopa

This study examines the acute and chronic effects of the insecticide (S)-methoprene on the survival and reproduction of the freshwater cladoceran Moina macrocopa. In laboratory toxicity tests, the 24- and 48-h LC50 values for (S)-methoprene were 0.51 and 0.34 mg litre(-1), respectively. Survival, longevity and fecundity were reduced at 0.05 mg litre(-1) and higher concentrations. At 0.005 and 0.01 mg litre(-1), longevity and fecundity increased slightly as compared to control animals. If environmental concentrations of methoprene do not exceed 0.05 mg litre(-1), as is generally the case, application of this insecticide is unlikely to induce detrimental effects on natural cladoceran populations. The stimulatory effect of very low levels of methoprene on reproductive performance is consistent with the hypothesis of a regulatory role of juvenile hormone-like compounds in crustacean reproduction.     

Deriving fuel-based emission factor thresholds to interpret heavy-duty vehicle roadside plume measurements

Remote sensing devices have been used for decades to measure gaseous emissions from individual vehicles at the roadside. Systems have also been developed that entrain diluted exhaust and can also measure particulate matter (PM) emissions. In 2015, the California Air Resources Board (CARB) reported that 8% of in-field diesel particulate filters (DPF) on heavy-duty (HD) vehicles were malfunctioning and emitted about 70% of total diesel PM emissions from the DPF-equipped fleet. A new high-emitter problem in the heavy-duty vehicle fleet had emerged. Roadside exhaust plume measurements reflect a snapshot of real-world operation, typically lasting several seconds. In order to relate roadside plume measurements to laboratory emission tests, we analyzed carbon dioxide (CO₂), oxides of nitrogen (NO_X), and PM emissions collected from four HD vehicles during several driving cycles on a chassis dynamometer. We examined the fuel-based emission factors corresponding to possible exceedances of emission standards as a function of vehicle power. Our analysis suggests that a typical HD vehicle will exceed the model year (MY) 2010 emission standards (of 0.2 g NO_X/bhp-hr and 0.01 g PM/bhp-hr) by three times when fuel-based emission factors are 9.3 g NO_X/kg fuel and 0.11 g PM/kg using the roadside plume measurement approach. Reported limits correspond to 99% confidence levels, which were calculated using the detection uncertainty of emissions analyzers, accuracy of vehicle power calculations, and actual emissions variability of fixed operational parameters. The PM threshold was determined for acceleration events between 0.47 and 1.4 mph/sec only, and the NO_X threshold was derived from measurements where after-treatment temperature was above 200°C. Anticipating a growing interest in real-world driving emissions, widespread implementation of roadside exhaust plume measurements as a compliment to in-use vehicle programs may benefit from expanding this analysis to a larger sample of in-use HD vehicles.

Implications: Regulatory agencies, civil society, and the public at large have a growing interest in vehicle emission compliance in the real world. Leveraging roadside plume measurements to identify vehicles with malfunctioning emission control systems is emerging as a viable new and useful method to assess in-use performance. This work proposes fuel-based emission factor thresholds for PM and NOx that signify exceedances of emission standards on a work-specific basis by analyzing real-time emissions in the laboratory. These thresholds could be used to prescreen vehicles before roadside enforcement inspection or other inquiry, enhance and further develop emission inventories, and potentially develop new requirements for heavy-duty inspection and maintenance (I/M) programs, including but not limited to identifying vehicles for further testing.     

Comparative study of the oxidation of atrazine and acetone by H2O2/UV, Fe(III)/UV, Fe(iii)/H2O2/UV and Fe(II) or Fe(III)/H2O2

In this study, the rates of degradation of organic compounds by several AOPs (H₂O₂/UV, Fe(III)/UV, Fe(III)/H₂O₂/UV, Fe(II)/H₂O₂ and Fe(III)/H₂O₂) have been compared. Experiments were carried out at pH ≈ 3 (perchloric acid / sodium perchlorate solutions) and with UV reactors equipped with a low-pressure mercury vapour lamp (emission at 253.7 run). The data obtained with atrazine ([Atrazine]_o = 100 μg/L) showed that the rate of degradation of atrazine in very dilute aqueous solution is much more rapid with Fe(III)/UV than with H₂O₂/UV. Photo-Fenton process (Fe(III)/H₂O₂/UV) was found to be more efficient than H₂O₂/UV and Fe(II)/H₂O₂ for the mineralization of acetone ([Acetone]_o = 1 mM).