A laboratory exposure procedure for screening pulp and paper mill effluents for the potential of causing increased mixed function oxidase activity in fish

To better understand the relationships between pulp manufacturing processes and mixed function oxidase (MFO) enzyme induction in fish, a practical and standardized exposure procedure is required. This study was undertaken to develop a laboratory-based exposure procedure to quantify the relative MFO induction potencies of different types of pulp and paper mill effluents. One major consideration in developing the procedure was to ensure that the protocol was practical so that tests could be performed in a short time, with small volumes of effluents and using simple experimental conditions. A series of concentration-response and time-course experiments were conducted to find the minimum time and effluent concentration which could distinguish the ability of different effluents to cause significant MFO induction in rainbow trout in the laboratory. Experiments were also conducted to determine the effects of biotic and abiotic factors such as loading density, fish size and feeding regime. This study showed that the exposure of rainbow trout in the laboratory to 10% concentration of secondary-treated effluent for 96 h caused significant increases in hepatic MFO activity. The magnitude of MFO induction was comparable to other field and laboratory observations. While fish size, loading density and feeding regime were found to affect the test results, consistent responses within a laboratory using this protocol are possible, provided that these factors are standardized. Therefore, the short-term exposure approach described in this paper could be a relevant tool for assessing the ability of different types of pulp and paper mill effluents to cause MFO induction in fish.     

NATO/CCMS Pilot study workshop on air pollution trarfsport and diffusion over coastal urban areas

The NATO/CCMS Pilot Study “Air pollution transport and diffusion over coastal urban areas” held an international workshop in Athens, 3–5 May 1993. The objective of this workshop was to develop guidelines for it reference experiment in a coastal urban area. It was intended that the guidelines would be sufficiently general that they could be applied to any coastal urban area, but Athens was bome in mind as a suitable candidate location. On the first day of the workshop, invited speakers delivered their lectures on different issues of dispersion in urban coastal areas. The second day was devoted to discussions in working groups focusing on key issues, such as, emissions' inventory, meteorological measurements, surface pollutant concentration measurements, aircraft measurements, remote sensing and model evaluation. On the final half-day the rapporteur from each working group reported on its work. Their reports are briefly summarized in the present paper.     

Ruminant uptake of nickel and other elements from industrial air pollution in the Norwegian-Russian border area

Concentrations of the elements aluminium, arsenic, cadmium, chromium, cobalt, copper, lead, mercury, nickel, selenium and zinc in liver, and of nickel in kidneys, were studied in reindeer, moose and sheep from South Varanger in eastern Finnmark and comparable districts in western Finnmark, Norway. The study included samples from 31 reindeer, 10 moose and 10 sheep from Jarfjord (South Varanger); 31 reindeer, 27 moose and 15 sheep from Pasvik (South Varanger); and 40 reindeer, 16 moose and 15 sheep from western Finnmark. Levels of arsenic, copper, nickel and selenium were much higher in reindeer from one or both areas in South Varanger than in reindeer from western Finnmark. Levels of chromium, cobalt and zinc were also significantly higher in South Varanger reindeer than in reindeer from the reference area. Within South Varanger the highest levels of these elements were invariably found in the Jarfjord area. For the other elements studied hepatic levels in South Varanger were similar to or lower than in western Finnmark. Also in moose, higher levels of nickel and of selenium (Jarfjord only) were found in the South Varanger samples than in samples from western Finnmark. In sheep, on the other hand, levels in South Varanger samples were similar to levels in western Finnmark for all the elements studied. Comparing the results with reports on pollution of air and vegetation, it was concluded that for all the elements showing higher levels in reindeer and moose from South Varanger compared to the reference areas, the effect most probably was a result of atmospheric transport of industrial pollution from the nearby Russian towns Nikel and Zapoljarnij. The geographical and interspecies differences within the South Varanger samples support this conclusion.     

Specific Contributions of Politics,Economics, and Toxicology in Setting Socially Consensual Limit Values

/ Limit values are legal limits for the concentrations of substances in the environment. They must be agreed upon in a consensual procedure between science, economics/technology, and political forces. This is a crucial political precondition for their social acceptance. The arguments put forward to justify their expediency and numerical level are based not only on risk-benefit considerations but also on the aspect of the technical avoidability of direct and indirect exposure. The critical assessment of the direct benefit of specified exposures falls within the responsibility of economics/technology, whereas criteria for their potential adverse effects (direct and indirect) are provided by medicine/biochemistry and/or ecology. Within this concept, the avoidance of nonbeneficial-even if not openly adverse-exposure is the essential aim of environmental hygiene and should be promoted by politics/science. In general, society or segments thereof reject adverse, accept beneficial, and tolerate unavoidable exposure. Conflicts of interest arise when different groups of society simultaneously define a given exposure as being adverse, beneficial, and unavoidable. Therefore, from the viewpoint of society as a whole, an optimal exposure lies as far as reasonably achievable at a level lower than known or plausible adverse effect thresholds (as defined by toxicology or ecology). This optimal level of exposure must be determined using a transparent and, hence, public procedure.KEY WORDS: Legal limit values; Benefit threshold; Social acceptance; Social tolerability; Adverse effect threshold; Avoidable exposure; Tolerance threshold; Environmental hygiene     

Trace metal contents of the pacific oyster (Crassostrea gigas) purchased from markets in Hong Kong

Arsenic, cadmium, chromium, and copper concentrations of the Pacific oyster,Crassostrea gigas, purchased from four different markets were determined in this project. In general, gill tissue had the highest proportion of metal contents (34%–67%) when compared with other tissue parts (mantle, viscera, and adductor muscle), except for arsenic, which showed the highest level in adductor muscle (44%). Smaller oysters (longitudinal length of soft body part less than 6 cm) had higher metal levels than larger ones (longitudinal length of soft body part more than 6 cm), except copper. None of the four metals examined showed an obvious seasonal trend, although cadmium levels seemed to be higher in autumn and winter months. Arsenic, cadmium, and copper levels in oysters purchased from different markets and different months obtained in the present study were higher when compared with past reports. Cadmium levels, as high as 10.98 mg/kg (dry weight basis) have been obtained. This approaches the safety limit that may be hazardous to human health. Continual monitoring of cadmium and other trace metals of toxicological significance to man in Hong Kong seafood is recommended.     

Structural isomers of polyfluorinated di- and tri-alkylated phosphate ester surfactants present in industrial blends and in microwave popcorn bags

Introduction  

In this study, we provide strategies for detecting and quantifying the structural isomers of polyfluorinated di- and tri-alkyl surfactants (PFAS) by mass spectrometry (MS). We specifically investigate polyfluorinated dialkylated phosphate ester surfactants (x:2/y:2 diPAPS, (F(CF₂) _x CH₂CH₂O-P(O)(O)⁻-OCH₂CH₂(CF₂) _y F)) and their thioether analogues (x:2/y:2 S-diPAPS, F(CF₂) _x CH₂CH₂SCH₂-C[CH₂O)₂P(O)(O)⁻]-CH₂SCH₂CH₂(CF₂) _y F), which are used for industrial applications, such as oil- and water-repellent coatings on paper and board. DiPAPS have been found in human blood and are metabolised to the persistent perfluoroalkyl carboxylic acids (PFCA) in rats.     

Polyfluorinated surfactants (PFS) in paper and board coatings for food packaging

Introduction  

In this study, we explore the identity of a range of polyfluorinated surfactants (PFS) used for food contact materials, primarily to impart oil and water repellency on paper and board. PFS are of interest, as they can be precursors of poly- and perfluorinated alkyl substances (PFAS), of which several are persistent and are found worldwide in human blood and in the environment.     

Chemical composition of burnt smell caused by accidental fires: environmental contaminants

The chemical composition of the odors typical of fires has recently been deciphered. Basically the constituents are mixtures of acetophenone, benzyl alcohol, hydroxylated derivatives of benzaldehyde, methoxylated and/or alkylated phenols and naphthalene. This finding makes it possible to develop objective, practical analytic measurement methods for the burnt smell as a contribution to improving fire damage assessment and remediation monitoring. With the aid of an artificially produced burnt smell and a panel of testers the odor detection threshold of a test mixture was determined olfactometrically to 2 μg m⁻³. Using a defined burnt-smell atmosphere in a test chamber, analytical methods with active sampling, the adsorbents XAD 7 and TENAX TA, and GC/MS measurement were then optimized and tested with a view to being able to carry out sensitive quantitative measurement of burnt smells. A further practical method with particular application to the qualitative characterization of this odor is based on the use of a new SPME (solid-phase microextraction) field sampler with DVB/CAR/PDMS (divinylbenzene/Carboxen™/polydimethylsiloxane) fibers.     

Carry-over of dietary organochlorine pesticides, PCDD/Fs, PCBs, and brominated flame retardants to Atlantic salmon (Salmo salar L.) fillets

Information on carry-over of contaminants from feed to animal food products is essential for appropriate human risk assessment of feed contaminants. The carry-over of potentially hazardous persistent organic pollutants (POPs) from feed to fillet was assessed in consumption sized Atlantic salmon (Salmo salar). Relative carry-over (defined as the fraction of a certain dietary POP retained in the fillet) was assessed in a controlled feeding trial, which provided fillet retention of dietary organochlorine pesticides (OCPs), dioxins (PCDD/Fs), polychlorinated biphenyls (PCBs), and brominated flame retardants (BFRs). Highest retention was found for OCPs, BFRs and PCBs (31-58%), and the lowest retentions were observed for PCDD/Fs congeners (10-34%). National monitoring data on commercial fish feed and farmed Atlantic salmon on the Norwegian market were used to provide commercially relevant feed-to-fillet transfer factors (calculated as fillet POP level divided by feed POP level), which ranged from 0.4 to 0.5, which is a factor 5-10 times higher than reported for terrestrial meat products. For the OCP with one of the highest relative carry-over, toxaphene, uptake and elimination kinetics were established. Model simulations that are based on the uptake and elimination kinetics gave predicted levels that were in agreement with the measured values. Application of the model to the current EU upper limit for toxaphene in feed (50 μg kg⁻¹) gave maximum fillet levels of 22 μg kg⁻¹, which exceeds the estimated permissible level (21 μg kg⁻¹) for toxaphene in fish food samples in Norway.     

Magnetic ion exchange treatment of stabilized landfill leachate

Stabilized landfill leachate is characterized by a high concentration of non-biodegradable organic matter, which is similar in chemistry to dissolved organic matter (DOM) in the natural aquatic environment. Magnetic ion exchange (MIEX) resin treatment is well-studied in drinking water for removal of DOM from natural waters. There are fewer studies evaluating MIEX treatment of waste waters, and there is no previous work evaluating MIEX treatment of landfill leachate. This work systematically evaluated MIEX treatment of stabilized landfill leachate and evaluated the results in the context of previous studies of MIEX treatment of natural and waste waters. Five leachates from four landfills were evaluated as a function of MIEX resin dose, mixing time, and regeneration efficiency. MIEX resin removed DOM from landfill leachate, even in the presence of a reported high background concentration of inorganic ions. MIEX resin that was exhausted with leachate DOM was effectively regenerated with a concentrated NaCl solution, and regenerated MIEX resin performed similarly to virgin resin. For a majority of the leachates, the removal trend for MIEX resin was color > UV-absorbing substances > dissolved organic carbon ≈ COD > total nitrogen. Finally, MIEX resin removed a wider range of DOM from leachate than coagulation. The most important contribution of this work is that MIEX treatment of leachate followed very similar trends as MIEX treatment of natural waters, which will allow previous MIEX data to be used to estimate the treatment efficiency of other waste waters.