Strain hardening effect of CF8M stainless steel in the environment fatigue test under pressurized water reactor condition

To develop a fatigue design curve of cast stainless steel CF8M that has been used in piping material of nuclear power plants, a low cycle fatigue tests were conducted in the environment of a pressurized water reactor at 15 MPa and 315 °C. Cylindrical solid fatigue specimens were used for the strain-controlled environmental fatigue tests. Fatigue life was measured in terms of the number of cycles with the variation of strain amplitudes at 0.04%/s strain rate. This paper focuses on the characteristics of the cyclic strain hardening effect caused during environment fatigue tests of the CF8M cast stainless steel. The process and method of correcting fatigue test data in this paper would be so useful to produce reliable data of environmental fatigue curves for the material in operating condition of high pressure and high temperature water environments.     

Study of the Climate Change Impacts on Water Quality in the Upstream Portion of the Cau River Basin,Vietnam

This paper presents simulations of climate change impacts on water quality in the upstream portion of the Cau River Basin in the North of Vietnam. The integrated modeling system GIBSI was used to simulate hydrological processes, pollutant and sediment wash-off in the river basin, and pollutant transport and transformation in the river network. Three projections for climate change based on emission scenarios B1, B2, and A2 of IPCC Special Report on Emission Scenarios (SRES) were considered. By assuming that the input pollution sources and watershed configuration were constant, based on 2008 data, water quality in the river network was simulated up to the terminal year 2050. For each climate change scenario, patterns of precipitation in wet and dry year were considered. The change in annual and monthly trends for dissolved oxygen (DO), biochemical oxygen demand (BOD), and ammonium ions (NH4+) load and concentration for different portions of the watershed have been analyzed. The results of these simulations show that climate change has more impact on changing the seasonal water quality parameters than on altering the average annual load of the pollutants. The percent change and change pattern in water quality parameters are different for wet and dry year, and the changes in wet year are smaller than those in dry year.     

Exposure assessment of lead to workers and children in the battery recycling craft village,Dong Mai,Vietnam

Human exposure to lead (Pb) due to uncontrolled Pb-acid battery recycling has been an environmental health issue in newly developed industrial regions. We conducted a human monitoring survey in Dong Mai, a battery recycling village in Vietnam, to assess exposure status to Pb. Lead level was measured in hair, blood and urine samples of residents in Dong Mai and two reference sites during 4 years spanning 2007–2011. In Dong Mai, Pb levels in three matrixes were significantly higher than those in reference sites. Blood Pb levels of all adults and children exceeded 10 μg/dL, the Centers for Disease Control and Prevention definition of an elevated blood Pb level. Clear increase of urinary δ-aminolevulinic acid (ALA) level with increasing blood Pb level indicated disruption of heme synthesis. One adult exceeded 100 μg/dL of blood Pb, where encephalopathy is of concern. The blood Pb levels achieved various toxic effect threshold values, and elevated blood Pb was not limited to recycling workers, but was also in children and women of reproductive age. Serious pollution status of Dong Mai village suggests an importance of further monitoring surveys in various developing Asian countries.     

N-methylcarbamate pesticides and their phenolic degradation products: hydrolytic decay,sequestration and metal complexation studies

We report on the rates of decomposition of a group of N-methylcarbamate (NMC) pesticides (carbaryl, carbofuran and propoxur) under pre-determined tropical field conditions. Rates of decomposition for three NMCs were determined at pH 7.08 and T?=?20?°C and pH 7.70 and T = 33?°C respectively, as follows: carbaryl (78?days and 69?days); carbofuran (143?days and 83?days) and propoxur (116?days and 79?days). Investigation on methods for removal of NMCs and their phenolic decomposition products shows that activated charcoal outperforms zeolite, alumina, diatomaceous earth, cellulose and montmorillonite clay in the removal of both NMCs and phenols from aqueous solution. Furthermore, metal complexation studies on the NMCs and phenols showed that Fe (III) forms a complex with isopropoxyphenol (IPP) within which the Fe:IPP ratio is 1:3, indicative of the formation of a metal chelate complex with the formula Fe(IPP)₃.     

An investigation of engine and fuel system performance in a diesel engine operating on waste cooking oil

Waste cooking oil (WCO) was experimentally examined to determine whether it can be used as an alternative fuel in a 3-cylinder, 4-stroke, direct injection, 48 kW power tractor engine. The test engine was operated under full load conditions using diesel fuel and waste vegetable oil from the 2400 to 1100 rpm and performance values were recorded. Tests were performed in two stages to evaluate the effect of the waste oils on the engine life cycle. When the test engine was operated with diesel fuel and waste cooking oil; engine torque decreased between at ratio of 0.09 % and 3% according to the engine speed. While no significant difference occurs in the diesel fuel tests at the end of 100 hours of operation, an important reduction was observed in the engine torque of the WCO engine between 4.21% and 14.48% according to the engine speed, and an increase in average smoke opacity ratio was also observed. In accordance with the results obtained from the studies, it was determined that the engine performance values of waste cooking oil show similar properties with diesel fuel, but in long-term usage, performance losses increased. In the SEM analysis performed on the fuel system, there were dark deposits at the nozzle tip and stem. According to an EDX analysis at the nozzle tips, the detected elements point to engine oil ash in the combustion chamber and show coking products (C and O). The other elements (Na, S, Ca, P, Cl, and K) point to used WCO.     

Mycobiota and mycotoxins in bee pollen collected from different areas of Slovakia

Contamination by microscopic fungi and mycotoxins in different bee pollen samples, which were stored under three different ways of storing as freezing, drying and UV radiation, was investigated. During spring 2009, 45 samples of bee-collected pollen were gathered from beekeepers who placed their bee colonies on monocultures of sunflower, rape and poppy fields within their flying distance. Bee pollen was collected from bees' legs by special devices placed at the entrance to hives. Samples were examined for the concentration and identification of microscopic fungi able to grow on Malt and Czapek-Dox agar and mycotoxins content [deoxynivalenol (DON), T-2 toxin (T-2), zearalenone (ZON) and total aflatoxins (AFL), fumonisins (FUM), ochratoxins (OTA)] by direct competitive enzyme-linked immunosorbent assays (ELISA). The total number of microscopic fungi in this study ranged from 2.98 ± 0.02 in frozen sunflower bee pollen to 4.06 ± 0.10 log cfu.g(-1) in sunflower bee pollen after UV radiation. In this study, 449 isolates belonging to 21 fungal species representing 9 genera were found in 45 samples of bee pollen. The total isolates were detected in frozen poppy pollen 29, rape pollen 40, sunflower pollen 80, in dried poppy pollen 12, rape pollen 36, sunflower 78, in poppy pollen after UV radiation treatment 54, rape 59 and sunflower 58. The most frequent isolates of microscopic fungi found in bee pollen samples of all prevalent species were Mucor mucedo (49 isolates), Alternaria alternata (40 isolates), Mucor hiemalis (40 isolates), Aspergillus fumigatus (33 isolates) and Cladosporium cladosporioides (31 isolates). The most frequently found isolates were detected in sunflower bee pollen frozen (80 isolates) and the lowest number of isolates was observed in poppy bee pollen dried (12 isolates). The most prevalent mycotoxin of poppy bee pollen was ZON (361.55 ± 0.26 μg.kg(-1)), in rape bee pollen T-2 toxin (265.40 ± 0.18 μg.kg(-1)) and in sunflower bee pollen T-2 toxin (364.72 ± 0.13 μg.kg(-1)) in all cases in frozen samples.     

Production of polyols and polyurethane from biomass: a review

Environmental Chemistry Letters - Depletion of fossil fuels and climate issues are calling for renewable sources of chemicals such as modern biomass, yet converting biomass into chemicals is...     

Assessing community vulnerability to floods and hurricanes along the Gulf Coast of the United States

Hurricanes and flooding have affected millions of people and generated massive economic losses over the past several decades. Geographic information system (GIS) methods are employed in this paper to analyse coastal communities' vulnerability to these two hazards along the Gulf Coast of the United States. Specifically, two types of quantitative indicators are developed: (i) exposure to hurricanes and flooding, based on information from multiple sources; and a social vulnerability index, constructed using census data. These indices are combined to depict the spatial patterns of overall community vulnerability to hurricanes and flooding along the US Gulf Coast. The results of this study can potentially inform disaster management agencies, county governments, and municipalities in areas at heightened risk. Furthermore, the demonstration of the geographic distribution of community vulnerability can assist decision-makers in prioritising to-do items and designing policies and plans for the more effective allocation of resources. The paper ends by discussing the study's limitations and its practical implications.     

Occurrence, fate and antibiotic resistance of fluoroquinolone antibacterials in hospital wastewaters in Hanoi, Vietnam

Occurrence and behavior of fluoroquinolone antibacterial agents (FQs) were investigated in hospital wastewaters in Hanoi, Vietnam. Hospital wastewater in Hanoi is usually not treated and this untreated wastewater is directly discharged into one of the wastewater channels of the city and eventually reaches the ambient aquatic environment. The concentrations of the FQs, ciprofloxacin (CIP) and norfloxacin (NOR) in six hospital wastewaters ranged from 1.1 to 44 and from 0.9 to 17 micrgl(-1), respectively. Total FQ loads to the city sewage system varied from 0.3 to 14 g d(-1). Additionally, the mass flows of CIP and NOR were investigated in the aqueous compartment in a small wastewater treatment facility of one hospital. The results showed that the FQ removal from the wastewater stream was between 80 and 85%, probably due to sorption on sewage sludge. Simultaneously, the numbers of Escherichia coli (E. coli) were measured and their resistance against CIP and NOR was evaluated by determining the minimum inhibitory concentration. Biological treatment lead to a 100-fold reduction in the number of E. coli but still more than a thousand E. coli colonies per 100ml of wastewater effluent reached the receiving water. The highest resistance was found in E. coli strains of raw wastewater and the lowest in isolates of treated wastewater effluent. Thus, wastewater treatment is an efficient barrier to decrease the residual FQ levels and the number of resistant bacteria entering ambient waters. Due to the lack of municipal wastewater treatment plants, the onsite treatment of hospital wastewater before discharging into municipal sewers should be considered as a viable option and consequently implemented.