Fullerenes toxicity and electronic properties

Nanotechnology globally represents a new direction within scientific development, where the atomic and electronic properties of molecules are used in a unique fashion to produce and construct new and exotic materials and products. Fullerenes (Bucky balls, C₆₀) constitute a particular group within the field of nanotechnology. Fullerenes find applications in medicine, industrial chemistry and electronics. However, there are several unanswered questions about fullerenes and their toxicological properties. Most toxicological studies on fullerenes evolve around the in vitro and in vivo aspects of pristine C₆₀ along with chemically modified C₆₀ molecules. We reviewed toxicology reports on C₆₀. We bring a critical and challenging evaluation of the electronic and quantum properties of C₆₀ molecules in context with the implications on cellular factors and metabolites. The evaluation shows that the reactivity and quantum chemical properties of C₆₀ can have unexpected effects in the cell, by principally absorbing metabolites, such as OH^? and H⁺ ions and alter its reactivity. We thus challenge the present view of C₆₀ solely based on empirical studies, based on the electronic properties of C₆₀ that vary considerably with their size and reaction path. A further example of this is the absorption of divalent zinc ions, which shows an increase in reactivity of the C₆₀ that presents an important pattern of chemical state, reactivity and toxicological potential. The results evaluate the toxicological potential of C₆₀ from a different angle than conventional, by applying a blend of critical review of the findings on C₆₀ toxicity, their chemical and electronic properties.     

A study on chemical properties of groundwater and soil in ophiolitic rocks in Firuzabad, east of Shahrood, Iran: with emphasis to heavy metal contamination

In order to assess the chemical properties of groundwater and soil in ophiolitic zone of Firuzabad, in east of Shahrood, Iran, 10 soil samples with regard to sensitive points (vicinity to mine, ophiolitic rocks, and villages) and 10 groundwater samples including nine samples from springs, and also one sample from a well in a village of the study area were taken. These samples were analyzed in laboratories using inductively coupled plasma method. The soil samples were also evaluated for grain size. The obtained results show that most of heavy and major elements were exceeding the permissible levels in soil and water samples in the study area. On the subject of soil quality, concentrations of elements Cr, Mn, Fe, Ca, Mg, Ca, Ni, and Zn are above permissible levels. Enrichment factor and index of geoaccumulation have been calculated for heavy and major elements of all soil samples. According to the obtained results, it may be argued that soil samples are contaminated in relation to the above-mentioned indices. Comparing the concentrations of elements with results of grain size analysis illustrates that the concentrations of Cr, Ni, Fe, Mg, and Co are positively correlated with sand fraction and the concentrations of Al, P, Mn, and Pb are directly proportional with clay fraction in soil samples. The study on water contamination suggests that concentrations of elements Cr, Ni, and Mg in groundwater samples of the study area are above the permissible levels. Some indices like metal index and heavy metal pollution index show that most of the water samples include heavy metal contamination.     

Potential applications of immobilized bitter gourd (Momordica charantia) peroxidase in the removal of phenols from polluted water

The potential applications of immobilized bitter gourd peroxidase in the treatment of model wastewater contaminated with phenols have been investigated. The synthetic water was treated with soluble and immobilized enzyme preparations under various experimental conditions. Maximum removal of phenols was found in the buffers of pH values 5.0-6.0 and at 40 degrees C in the presence of 0.75 mM H(2)O(2). Fourteen different phenols were independently treated with soluble and immobilized bitter gourd peroxidase in the buffer of pH 5.6 at 37 degrees C. Chlorinated phenols and native phenol were significantly removed while other substituted phenols were marginally removed by the treatment. Phloroglucinol and pyrogallol were recalcitrant to the action of bitter gourd peroxidase. Immobilized bitter gourd peroxidase preparation was capable of removing remarkably high percentage of phenols from the phenolic mixtures. Significantly higher level of total organic carbon was removed from the model wastewater containing individual phenol or complex mixture of phenols by immobilized bitter gourd peroxidase as compared to the soluble enzyme. 2,4-dichlorophenol and a phenolic mixture were also treated in a stirred batch reactor with fixed quantity of enzyme for longer duration. The soluble bitter gourd peroxidase ceased to function after 3h while the immobilized enzyme was active even after 6h of incubation with phenolic solutions.     

Antimicrobial-resistant patterns of Escherichia coli and Salmonella strains in the aquatic Lebanese environments

This study is the first to be conducted in Lebanon on the isolation and molecular characterization and the antimicrobial resistance profile of environmental pathogenic bacterial strains. Fifty-seven samples of seawater, sediment, crab, and fresh water were collected during the spring and summer seasons of 2003. The isolation of Escherichia coli and Salmonella using appropriate selective media revealed that 94.7% of the tested samples were contaminated with one or both of the tested bacteria. The polymerase chain reaction (PCR) was then used to identify the species of both bacteria using various sets of primers. Many pathogenic E. coli isolates were detected by PCR out of which two were identified as O157:H7 E. coli. Similarly, the species of many of the Salmonella isolates was molecularly identified. The confirmed isolates of Salmonella and E. coli were then tested using the disk diffusion method for their susceptibility to four different antimicrobials revealing high rates of antimicrobial resistance.     

Fuzzy rule-based modelling for human health risk from naturally occurring radioactive materials in produced water

Produced water, discharged from offshore oil and gas operations, contains chemicals from formation water, condensed water, and any chemical added down hole or during the oil/water separation process. Although, most of the contaminants fall below the detection limits within a short distance from the discharge port, a few of the remaining contaminants including naturally occurring radioactive materials (NORM) are of concern due to their bioavailability in the media and bioaccumulation characteristics in finfish and shellfish species used for human consumption. In the past, several initiatives have been taken to model human health risk from NORM in produced water. The parameters of the available risk assessment models are imprecise and sparse in nature. In this study, a fuzzy possibilistic evaluation using fuzzy rule based modeling has been presented. Being conservative in nature, the possibilistic approach considers possible input parameter values; thus provides better environmental prediction than the Monte Carlo (MC) calculation. The uncertainties of the input parameters were captured with fuzzy triangular membership functions (TFNs). Fuzzy if-then rules were applied for input concentrations of two isotopes of radium, namely (226)Ra, and (228)Ra, available in produced water and bulk dilution to evaluate the radium concentration in fish tissue used for human consumption. The bulk dilution was predicted using four input parameters: produced water discharge rate, ambient seawater velocity, depth of discharge port and density gradient. The evaluated cancer risk shows compliance with the regulatory guidelines; thus minimum risk to human health is expected from NORM components in produced water.     

Solid Waste Management Practices in the Eastern Province of Saudi Arabia

Solid waste management practices in the Eastern Province of Saudi Arabia are reviewed. The officials of various municipalities and agencies responsible for collecting and disposing of municipal waste were interviewed. The refuse generation rate found is in the range of 1.61–2.72 kg per capita per day. The refuse composition data indicate a high percentage of glass, metals, and wood. For storage purposes, 0.2-m³ barrels are used in residential areas and 0.75 to 1.50 m³-capacity containers are used in commerical areas. The present solid-waste collection system is labor-intensive, and a significant part of the budget is spent on collection and haul operations. The unit collection and haul cost is much higher than the unit disposal cost of refuse. The direct haul of refuse is the common practice, and the use of transfer stations has not yet been considered. It is also observed that the disposal methods used at these sites are not in line with modern techniques for refuse disposal. Landfilling and combined burning and landfilling are the common disposal methods at all the sites.     

Refugees,water balance,and water stress: Lessons learned from Lebanon

Ambio - The Syrian crisis caused a massive influx of displaced people into neighboring countries, with Lebanon hosting the highest per capita number of refugees (3:10). Water remains the most...     

Indoor exposure to respirable particulate matter and particulate-phase PAHs in rural homes in North India

In order to evaluate the exposure of the northern India rural population to polyaromatic hydrocarbon (PAH) inhalation, indoor pollution was assessed by collecting and analyzing the respirable particulate matter PM_2.5 and PM₁₀ in several homes of the village Bhithauli near Lucknow, UP. The home selection was determined by a survey. Given the nature of biomass used for cooking, homes were divided into two groups, one using all kinds of biomass and the second type using plant materials only. Indoor mean concentrations of PM_2.5 and associated PAHs during cooking ranged from 1.19 ± 0.29 to 2.38 ± 0.35 and 6.21 ± 1.54 to 12.43 ± 1.15 μg/m³, respectively. Similarly, PM₁₀ and total PAHs were in the range of 3.95 ± 1.21 to 8.81 ± 0.78 and 7.75 ± 1.42 to 15.77 ± 1.05 μg/m³, respectively. The pollutant levels during cooking were significantly higher compared to the noncooking period. The study confirmed that indoor pollution depends on the kind of biomass fuel used for cooking.