Removal of hinosan from underground water using NH4Cl-modified activated carbon from rice husk

Environmental Science and Pollution Research - In the present study, NH4Cl-modified activated carbon was synthesized from rice husk and used as an adsorbent for removal of hinosan from underground...     

Properties of Poly(Vinyl Alcohol)/Chitosan Nanocomposite Films Reinforced with Oil Palm Empty Fruit Bunch Amorphous Lignocellulose Nanofibers

The objective of this study was to investigate the properties of poly(vinyl alcohol)/chitosan nanocomposite films reinforced with different concentration of amorphous LCNFs. The properties analyzed were morphological, physical, chemical, thermal, biological, and mechanical characteristics. Oil palm empty fruit bunch LCNFs obtained from multi-mechanical stages were more dominated by amorphous region than crystalline part. Varied film thickness, swelling degree, and transparency of PVA/chitosan nanocomposite films reinforced with amorphous part were produced. Aggregated LCNFs, which reinforced PVA/chitosan polymer blends, resulted in irregular, rough, and uneven external surfaces as well as protrusions. Based on XRD analysis, there were two or three imperative peaks that indicated the presence of crystalline states. The increase in LCNFs concentration above 0.5% to PVA/chitosan polymer blends led to the decrease in crystallinity index of the films. A noticeable alteration of FTIR spectra, which included wavenumber and intensity, was obviously observed along with the inclusion of amorphous LCNFs. That indicated that a good miscibility between amorphous LCNFs and PVA/chitosan polymer blend generated chemical interaction of those polymers during physical blending. Reinforcement of PVA/chitosan polymer blends with amorphous LCNFs influenced the changes of T_g (glass transition temperature), T_m (melting point temperature), and T_max (maximum degradation temperature). Three thermal phases of PVA/chitosan/LCNFs nanocomposite films were also observed, including absorbed moisture evaporation, PVA and chitosan polymer backbone structural degradation and LCNFs pyrolysis, and by-products degradation of these polymers. The addition of LCNFs 0.5% had the highest tensile strength and the addition of LCNFs above 0.5% decreased the strength. The incorporation of OPEFB LCNFs did not show anti-microbial and anti-fungal properties of the films. The addition of amorphous LCNFs 0.5% into PVA/chitosan polymer blends resulted in regular and smooth external surfaces, enhanced tensile strength, increased crystallinity index, and enhanced thermal stability of the films.     

Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.     

Measurement of black carbon (BC) by an optical method and a thermal-optical method: Intercomparison for four sites

Comparison of black carbon (BC) measurements obtained by two methods was performed for aerosols samples collected on Whatman 41 (W-41) filters, using an optical method (Magee Scientific Optical Transmissometer Model OT-21) and a thermal-optical method (Sunset Laboratory Thermal-optical analyzer). Samples were collected from four sites: Albany (a small urban site, NY), Antalya (coastal site, Turkey), Whiteface Mountain (remote site, NY) and Mayville (rural site, NY). At Albany, comparison between the two methods showed excellent agreement; a least-squares regression line yielded a slope of 1.02, and r² = 0.88. Similar comparisons at Antalya (slope of 1.02, r² = 0.5) and Whiteface Mountain (slope of 0.92 and r² = 0.58) also gave very good relationship. At Mayville, the relationship between the two methods yielded somewhat lower regression: a slope of 0.75, and r² = 0.44. The data from the four locations, when plotted together, yielded an excellent agreement: a slope of 0.91, and r² of 0.84. Based on our measurements, it appears that optical measurement using the OT-21 can be successfully applied to determination of BC in W-41 filters. However, because of the variability in the chemical composition of BC aerosol at different locations, it is suggested that the calibration of OT-21 when using W-41 filters should be performed with a statistically significant numbers of samples for specific sites.     

Determination of elemental carbon in lake sediments using a thermal–optical transmittance (TOT) method

An improved chemical oxidation pretreatment method has been developed for the determination of elemental carbon (EC) [also known as black carbon (BC) or soot] in lake sediments, using a thermal–optical transmittance (TOT) carbon analyzer. The method employs six steps: (1) removal of carbonates by treatment with HCl; (2) removal of silicates by treatment with HF + HCl; (3) removal of any remaining carbonates by treatment with HCl; (4) removal of humic acids by treatment with NaOH; and (5) oxidation of kerogens by K₂Cr₂O₇ + H₂SO₄. A critical step of zinc chloride treatment was added; this apparently changes EC's morphology and enhances retention on quartz fiber filter, resulting in several-fold increased chemical yield. EC was determined using the TOT method with modified combustion timings. Carbon black (acetylene) and four NIST standard reference materials (SRMs) were used for quality control, and to assess the precision of the analysis. The EC recoveries from 18 carbon black samples varied from 90 to 111%, with a mean value of 99 ± 6%. The high EC recoveries confirmed the validity of the method. Char reference materials (i.e. chestnut wood and grass char) were used to determine potential contribution to EC in our measurements. The char references containing about 700 mg total organic carbon (OC) contributed ～1.5% EC. The measured EC values from four NIST standards were 17.0 ± 0.6, 24.2 ± 3.2, 5.6, and 1.9 ± 0.1 mg g_dw^?1 for SRM-1648, SRM-1649a, SRM-1941b and SRM-8704, respectively. These values in SRMs were in agreement (<±4%) with the previously reported values. The method was applied to determine the EC in sediment cores from an urban lake and a remote mountain lake in the Northeastern United States. The EC concentrations in two lakes mimic the model EC emissions from the industrial revolution in United States.     

Quantitative structure-retention relationship for retention behavior of organic pollutants in textile wastewaters and landfill leachate in LC-APCI-MS

Introduction  

A quantitative structure-retention relation (QSRR) study was conducted on the retention times of organic pollutants in textile wastewaters and landfill leachate which was obtained by liquid chromatography-reversed phase-atmospheric pressure chemical ionization-mass spectrometry.     

Participatory assessment of the sustainability of livelihoods in the agroecosystem of Abesard,Iran

In order to improve the livelihoods of communities and make them more sustainable, study of the vulnerability of livelihoods seems necessary. In this paper, participatory vulnerability analysis was used within a sustainable rural livelihoods framework to assess the sustainability of livelihoods in the agroecosystem of Abesard, Iran. In addition, this paper explored vulnerability contexts that affect livelihood assets. Findings revealed that land use change, climate variability, market fluctuations and higher mechanisation were the main reasons of vulnerability. To overcome these problems and to adapt to changes, households have followed livelihood strategies such as agricultural intensification, livelihood diversification, and agricultural biodiversity. The government has also provided some services such as extension programmes, fertilizers, and subsidies to compensate for asset limitations. Overall, implementation of the following development policies are recommended: (1) support of agricultural production by government institutions; (2) moving towards the development of sustainable agricultural practises that integrate a variety of methods in a sustainable manner; (3) development of agricultural intensification in a sustainable way that compensates for any inadequacy of assets; and (4) providing adult vocational training programmes for both men and women related to on-farm and off-farm activities. In the end, results highlighted the need for more emphasis on overcoming the challenges of sustainable agriculture using a participatory approach in assessment of the vulnerability of community livelihoods.     

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.     

Seasonal changes of CO(2), CH(4) and N(2)O fluxes in relation to land-use change in tropical peatlands located in coastal area of South Kalimantan

Tropical peatland could be a source of greenhouse gases emission because it contains large amounts of soil carbon and nitrogen. However these emissions are strongly influenced by soil moisture conditions. Tropical climate is characterized typically by wet and dry seasons. Seasonal changes in the emission of carbon dioxide (CO(2)), methane (CH(4)) and nitrous oxide (N(2)O) were investigated over a year at three sites (secondary forest, paddy field and upland field) in the tropical peatland in South Kalimantan, Indonesia. The amount of these gases emitted from the fields varied widely according to the seasonal pattern of precipitation, especially methane emission rates were positively correlated with precipitation. Converting from secondary forest peatland to paddy field tended to increase annual emissions of CO(2) and CH(4) to the atmosphere (from 1.2 to 1.5 kg CO(2)-C m(-2)y(-1) and from 1.2 to 1.9 g CH(4)-C m(-2)y(-1)), while changing land-use from secondary forest to upland tended to decrease these gases emissions (from 1.2 to 1.0 kg CO(2)-C m(-2)y(-1) and from 1.2 to 0.6 g CH(4)-C m(-2)y(-1)), but no clear trend was observed for N(2)O which kept negative value as annual rates at three sites.     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.