好氧MBBR处理含吲哚废水的工艺优化试验研究

为了处理制药企业废水中吲哚类有机污染物,采用好氧MBBR(移动床生物膜反应器)工艺对含吲哚废水进行了试验研究,通过考察HRT、曝气量、吲哚冲击负荷等工艺条件对吲哚、COD和NH_4~+-N等去除效果的影响,确定了好氧MBBR反应器的最佳工艺条件。实验结果表明,在HRT在6~18 h变化时,MBBR工艺对吲哚去除率在8 h以上时达到100%,COD去除率在8 h达到89.65%,而NH_4~+-N去除率在12 h达到最高。在曝气量为0.1~0.12 m L/min时,MBBR工艺对COD和NH_4~+-N去除率分别为88.88%~92.95%和65%~66.83%。进水吲哚浓度25~65 mg/L变化时,好氧MBBR对吲哚去除率保持在100%,而对COD和NH_4~+-N去除率也保持在80%和40%以上,表明好氧MBBR工艺在处理难降解有机污染物方面具有显著优势。     

基于LMDI方法的广东省生活能源消费影响因素分析

运用对数平均迪氏分解法(LMDI)构建广东省生活能源消费的因素分解模型,定量分析2000~2014年间能源结构、人口规模、居住面积和设备消费等因素的变化对生活能源消费的影响。研究发现,4种因素的累计效应均为正,而采用逐年效应角度观察,设备消费是生活能源消费增加的最大拉动因素,其次为居住面积。基于研究结果,提出降低居民生活能源消费的相关政策建议。     

浸没燃烧技术处理高浓度有机废水研究

针对现阶段高浓度有机废水处理困难的问题,提出了一种基于浸没燃烧技术的处理方法,设计制作了1台浸没燃烧装置,并开展了高浓度有机废水浸没燃烧实验研究,探究了过量空气系数、二次风量、燃烧温度等参数对燃烧尾气中CO、NOx排放的影响,以及浸没深度、燃烧温度对高浓度有机废水COD去除的影响。实验结果表明:该工艺对高浓度有机废水中的有机物去除效果明显,温度在900℃以上,浸没深度达到20 cm时,COD去除率可达90%以上。该方法可作为废水处理设备,与生物法等处理技术联用,应用前景广阔。     

Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

广州市水资源人口承载力研究

水资源是城市可持续发展的重要基础,科学分析城市水资源承载力与经济社会发展的关系,并基于此协调人口与水资源的关系,建立适应于城市水资源承载力的人类生活与生产方式,将有助于实现城市经济社会可持续发展。本文的计算思路是在对广州市水资源现状进行分析的基础之上,构建广州市水资源承载力评价指标体系,划定水资源承载力等级,对市各辖区相应的水资源承载力进行评价,同时结合广州市人口规划预测的人口数量及未来的供水能力等进行预测,以此提出提升水资源承载力的相关政策和措施。     

沈阳市推进环境污染责任保险制度的探索与实践

介绍了沈阳市环境污染责任保险推进情况、推进方法及配套政策措施,明确了沈阳市环境污染责任保险参保企业的确定原则,结合当前沈阳市该险种推进过程中存在的法律法规缺失造成环境污染责任保险推进不力、企业投保意识不强、环境专门机构与保险公司的协调配合有待于进一步加强相关问题,提出了选择适合的环境污染责任保险模式、加强环保部门与保险行业的合作、将环境污染责任险推进融入到环境监理工作中等建议及对策。     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

磺化酞菁钴光催化降解甲基橙染料的试验研究

针对难降解的偶氮染料废水,在以磺化酞菁钴CoPcS为催化剂的情况下,实验研究了催化剂浓度、光照强度、温度、甲基橙初始浓度对降解效果的影响。结果表明:当催化剂CoPcS浓度0.2 g/L,光照强度250 W,温度40℃,pH=1,甲基橙10 mg/L时,在30 min内,甲基橙的降解率高达98.06%。最佳试验条件:pH值为1,催化剂浓度0.2 g/L,甲基橙初始浓度15 mg/L,温度40℃。影响因素主次为:pH值〉甲基橙初始浓度〉温度〉催化剂浓度,该反应符合零级反应动力学方程。     

HSE培训课程体系建设初探

通过调研国内外HSE培训课程建设情况,提出了建设中国石化HSE培训课程体系的主体架构和主要课程.结合 HSE培训实践活动,阐述了中国石化HSE培训课程体系建设设想.     

曝气生物滤池在炼油废水处理中的应用

介绍了曝气生物滤池的工艺原理和主要特点,以及在炼油厂废水处理中的应用,分析了曝气生物滤池的主要影响因素温度、pH值和碱度、水力负荷、溶解氧等。曝气生物滤池在废水处理中有较好的应用前景。