Three-Dimensional Numerical Simulation of Air Pollutant Dispersion in Street Canyons

The PHOENICS Computational Fluid Dynamics (CFD) software package has been used with a standard k- turbulence model to simulate the three-dimensional dispersion of air pollutants in an urban street canyon. In all cases, a vortex was formed within the street canyon, characterized by updrafts near the upwind buildings and down-drafts near the downwind buildings. Contours of pollutant concentrations over a transverse vertical plane at mid-canyon show pollutants circulating within the vortex, with higher concentrations at the leeward face than at the windward faces, and higher concentrations above downwind buildings than above upwind buildings. Longitudinal distributions of pollutant concentrations at leeward and windward faces are characterized by higher concentrations at mid-block and lower concentrations at the ends. These results agree qualitatively with previous wind tunnel findings such as those of Hoydysh and Dabberdt (1988) and Wedding et al. (1977). The results also suggest that the k- turbulence model is satisfactory for simulating the effect of turbulence on dispersion of pollutants in street canyons     

Solid waste bin detection and classification using Dynamic Time Warping and MLP classifier

The increasing requirement for Solid Waste Management (SWM) has become a significant challenge for municipal authorities. A number of integrated systems and methods have introduced to overcome this challenge. Many researchers have aimed to develop an ideal SWM system, including approaches involving software-based routing, Geographic Information Systems (GIS), Radio-frequency Identification (RFID), or sensor intelligent bins. Image processing solutions for the Solid Waste (SW) collection have also been developed; however, during capturing the bin image, it is challenging to position the camera for getting a bin area centralized image. As yet, there is no ideal system which can correctly estimate the amount of SW. This paper briefly discusses an efficient image processing solution to overcome these problems. Dynamic Time Warping (DTW) was used for detecting and cropping the bin area and Gabor wavelet (GW) was introduced for feature extraction of the waste bin image. Image features were used to train the classifier. A Multi-Layer Perceptron (MLP) classifier was used to classify the waste bin level and estimate the amount of waste inside the bin. The area under the Receiver Operating Characteristic (ROC) curves was used to statistically evaluate classifier performance. The results of this developed system are comparable to previous image processing based system. The system demonstration using DTW with GW for feature extraction and an MLP classifier led to promising results with respect to the accuracy of waste level estimation (98.50%). The application can be used to optimize the routing of waste collection based on the estimated bin level.     

Productivity,exergy, exergoeconomic,and enviroeconomic assessment of hybrid solar distiller using direct salty water heating

Environmental Science and Pollution Research - In this work, experimental work is presented on the performance of a hybrid solar distiller comprising solar still (SS) combined with parabolic trough...     

New insights about human tick infestation features: a systematic review and meta-analysis

Environmental Science and Pollution Research - There are many studies that provide information regarding ticks infesting humans. However, there is no a meta-analysis about the global ranks of tick...     

Sensitive and selective determination of phenylhydrazine in the presence of hydrazine at a ferrocene-modified carbon nanotube paste electrode

The determination of hydrazine derivatives is of special interest because they are toxic and widely used in industry, agriculture and explosives. Electrochemical analysis has become of growing importance in industrial process control, environmental monitoring, and different applications in medicine and biotechnology. In the present work, we used a carbon paste electrode modified by ferrocene and carbon nanotubes for simultaneous determination of phenylhydrazine and hydrazine. The modified electrode showed an excellent character for electrocatalytic oxidization of phenylhydrazine and hydrazine with a 310 mV separation of both peaks. Differential pulse voltammetric peak currents of phenylhydrazine and hydrazine increased linearly with their concentrations at the range of 0.85–700 and 16–800 μM, and the detection limits (3σ) were determined to be 0.6 and 14 μM, respectively. Here, we show that this electrode could be used as an electrochemical sensor for determination of phenylhydrazine and hydrazine in real samples (water and urine) with advantages such as short time of analysis, lack of pretreatment procedures and more cheaper in comparison with some routine analysis methods such as chromatography or spectroscopy. The modified electrode showed good reproducibility, remarkable long-term stability, and especially good surface renewability by simple mechanical polishing.     

Understanding the Role of Local Management in Vegetation Recovery Around Pastoral Settlements in Northern Kenya

The recent greening of the Sahel region and increase in vegetation cover around pastoral settlements previously described as “man-made deserts”, have raised important questions on the permanency of land degradation associated with the over-exploitation of woody plants. Evidence presented is mostly on increased wetness, while management by local communities has received limited attention. This study evaluated changes in woody vegetation cover around the settlements of Kargi and Korr in northern Kenya, using satellite imagery (1986/2000), ecological ground surveys and interviews with local elders, in order to understand long-term changes in vegetation cover and the role of local community in vegetation dynamics. At both settlements, there were increments in vegetation cover and reduction in the extent of bare ground between 1986 and 2000. At Kargi settlement, there were more tree seedlings in the centre of settlement than further away. Mature tree class was more abundant in the centre of Korr than outside the settlement. The success of the regeneration and recovery of tree cover was attributed to the actions of vegetation management initiative including stringent measures by the local Environmental Management Committees. This study provides good evidence that local partnership is important for sustainable management of resources especially in rural areas where the effectiveness of government initiative is lacking.     

Life cycle inventory of the commercial production of compost from oil palm biomass: a case study

This paper compared the life cycle inventory (LCI) obtained from three commercial oil palm biomass composting projects in Malaysia which use the open windrow composting system. The LCI was obtained and calculated based on the functional unit of 1 t of compost produced. The input of the inventory are the feed materials such as empty fruit bunches (EFB) and palm oil mill effluent (POME); and utilities which include electricity generated at palm oil mill and diesel used. Composting 2.0–2.5 t of EFB and 5.0–7.5 t of POME required diesel from 218.7 to 270.2 MJ and electricity from 0 to 6.8 MJ. It is estimated that the composting emitted from 0.01 to 0.02 t CO_2eq/t_compost mainly from diesel used to operate machineries. Composting saved 65 % of time required for a complete degradation of POME when compared to ponding system, and 89 % of time required for a complete degradation of EFB compared to mulching. In terms of land required, it required 36 % less land as compared to ponding for POME and 99 % less land as compared to mulching for EFB. Based on the case study, diesel was found to be the main contributor to the environmental impact. There is a potential of upgrading the process to be more economical and environmental friendly. Using electricity as the source of energy has a lower footprint for the composting process. Instead of using raw POME, studies had reported that using treated POME either from anaerobic ponding or digested tank can accelerate the composting process.     

Rapid release of heavy metals and anions from polyethylene laminated paper cups into hot water

Polyethylene laminated disposable paper cups are commonly used as a container for hot drinks, yet there is limited knowledge on the transfer of contaminants from the cup to the drink. Here we poured 95^?C hot water in 14 cups, to simulate the preparation of hot beverage for daily use. We studied the water composition after 15 min by inductively coupled plasma mass spectrometry (ICP-MS) and ion chromatography. Results show the presence of metals such as vanadium, chromium, copper, cobalt and arsenic at concentration ranging from 0.04 to 1.80 µg/L. Nitrate, nitrite, chloride, bromate, fluoride and sulfate ions were also detected at concentration from 0.003 to 49.21 mg/L. All concentrations are below the WHO maximum permissible limits in drinking water. However, the levels of vanadium at 1.24 µg/L and fluoride ions at 1.03 mg/L are likely to induce a health risk by bioaccumulation after long-term water ingestion. Therefore paper cups composition should be modified to avoid the release of contaminants in hot drinks.