Development of conflict techniques for left-turn and cross-traffic at protected left-turn signalized intersections

To design comprehensive traffic safety measures, the risk of the occurrence of traffic accidents must be objectively evaluated. It is difficult, however, to evaluate the effects of traffic measures in terms of the change in the number of traffic accidents, because traffic accidents are unpredictable and rare events. Therefore, this study used a traffic conflict technique to objectively evaluate traffic safety at intersections. In this study, traffic conflicts that occur at the time of a signal violation were differentiated according to type, and a traffic conflict technology was developed that would consider the severity of each type of conflict. To apply this method, traffic images were collected from the Jungja intersection and the Naejung intersection in Sungnam City, Korea and were analyzed using traffic data by means of image procedure technology. The analyses showed that of the four levels of differentiated conflict conditions, the Level 1 condition occurred most often, followed by Level 2, which occurred much less frequently than Level 1. Level 3 (serious conflicts) and Level 4 (dangerous conflicts: accidents) conditions were not detected.     

Evaluation of pliers’ grip spans in the maximum gripping task and sub-maximum cutting task

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.     

Mutagenic and carcinogenic potency of extracts from diesel related environmental emissions: Simultaneous morphological transformation and mutagenesis in BALB/c 3t3 cells

Particulate extracts from six different environmental emission sources were assayed for genotoxic activity in mouse BALB/c 3T3 clone A31-1 cells. All compounds were tested simultaneously for both transforming and mutagenic (induction of ouabain-resistance) potential with and without exogenous metabolic activation in the form of a 9000 × g postmitochondrial hepatic supernatant fraction from Aroclor-1254 induced Fischer 344 rats. Dichloromethane particulate extracts from the exhaust of two light duty diesel engines (Oldsmobile and Nissan), one heavy duty diesel engine (Caterpillar) and one late model gasoline engine (Mustang II) were assayed in an identical manner to particulate extracts from the emissions of a roofing tar pot and a coke oven. No clear dose-dependent responses were observed, but several of the samples showed significant transforming and mutagenic activity. A qualitative ranking system showed the activity of these particulate extracts for either mutagenesis or transformation was: coke oven = Mustang II gasoline engine > Nissan diesel engine > roofing tar. Particulate extracts from the Oldsmobile diesel engine and the Caterpillar diesel engine showed essentially no activity.     

An investigation of methods for enriching trophoblast from maternal blood

Trophoblast deportation is known to occur in normal human pregnancy, but it is not yet clear whether these cells routinely enter the maternal peripheral circulation and are available as a source of fetal DNA for non-invasive prenatal diagnosis of genetic disorders. To resolve this issue requires an efficient method of enriching trophoblast from maternal blood combined with a means to confirm its identity. Five different techniques were tested on ten retroplacental blood samples to determine the most sensitive and operator-efficient method. Lysis of red cells alone gave the best recovery of trophoblast but had to be discounted, together with Ficoll density gradient centrifugation, due to the very low purity and the excessive time required. Fluorescence-activated cell sorting (FACS) of pre-enriched trophoblast resulted in the lowest recovery rate (8 per cent) despite a 3250-fold enrichment and a very high purity. Immunomagnetic beads (Dynabeads) coated with anti-CD 16 antibody proved to be the best method for the subsequent immunocytochemical characterization of deported trophoblast. However, IO beads coated with anti-CD45 antibody may be more useful for isolating trophoblast for prenatal diagnosis due to the high purity, enrichment (32-fold), and recovery rate (78 per cent) obtained with this method.     

Health risk assessment and source apportionment of PM2.5-bound toxic elements in the industrial city of Siheung,Korea

Environmental Science and Pollution Research - The emission sources and their health risks of fine particulate matter (PM2.5) in Siheung, Republic of Korea, were investigated as a middle-sized...     

Risk assessment of particulate matter by considering time-activity-pattern and major microenvironments for preschool children living in Seoul,South Korea

Environmental Science and Pollution Research - Preschool children aged 3–6 years are vulnerable to exposed to particulate matter (“PM10” and “PM2.5”). It is required...     

Pesticide toxicity towards microalgae increases with environmental mixture complexity

Environmental Science and Pollution Research - Effect-directed analysis (EDA) aims at identifying the compound(s) responsible for toxicity in a complex environmental sample where several dozens of...     

Prediction of the vertical profile of ozone based on ground-level ozone observations and cloud cover

A number of statistical techniques have been used to develop models to predict high-elevation ozone (O3) concentrations for each discrete hour of day as a function of elevation based on ground-level O3 observations. The analyses evaluated the effect of exclusion/inclusion of cloud cover as a variable. It was found that a simple model, using the current maximum ground-level O3 concentration and no effect of cloud cover provided a reasonable prediction of the vertical profile of O3, based on data analyzed from O3 sites located in North Carolina and Tennessee. The simple model provided an approach that estimates the concentration of O3 as a function of elevation (up to 1800 m) based on the statistical results with a +/- 13.5 ppb prediction error, an R2 of 0.56, and an index of agreement, d1, of 0.66. The inclusion of cloud cover resulted in a slight improvement in the model over the simple regression model. The developed models, which consist of two matrices of 24 equations (one for each hour of day for clear to partly cloudy conditions and one for cloudy conditions), can be used to estimate the vertical O3 profile based on the inputs of the current day's 1-hr maximum ground-level O3 concentration and the level of cloud cover.     

Cadmium accumulation and elimination in tissues of juvenile olive flounder, Paralichthys olivaceus after sub-chronic cadmium exposure

Experiments were carried out to investigate the accumulation and elimination of cadmium (Cd) in tissues (gill, intestine, kidney, liver and muscle) of juvenile olive flounder, Paralichthys olivaceus, exposed to sub-chronic concentrations (0, 10, 50, 100 microg l(-1)) of Cd. Cd exposure resulted in an increased Cd accumulation in tissues of flounder with exposure periods and concentration, and Cd accumulation in gill and liver increased linearly with the exposure time. At 20 days of Cd exposure, the order of Cd accumulation in organs was gill > intestine > liver > kidney > muscle and after 30 days of exposure, those were intestine > gill > liver > kidney > muscle. An inverse relationship was observed between the accumulation factor (AF) and the exposure level, but AF showed an increase with exposure time. During the depuration periods, Cd concentration in the gill, intestine and liver decreased immediately following the end of the exposure periods. No significant difference was found Cd in concentration in the kidney and muscle during depuration periods. The order of Cd elimination rate in organs were decreased intestine > liver > gill during depuration periods.     

Source characterization of ambient fine particles at multiple sites in the Seattle area

To identify major PM_2.5 (particulate matter ≤2.5 μm in aerodynamic diameter) sources with a particular emphasis on the ship engine emissions from a major port, integrated 24 h PM_2.5 speciation data collected between 2000 and 2005 at five United State Environmental Protection Agency's Speciation Trends Network monitoring sites in Seattle, WA were analyzed. Seven to ten PM_2.5 sources were identified through the application of positive matrix factorization (PMF). Secondary particles (12–26% for secondary nitrate; 17–20% for secondary sulfate) and gasoline vehicle emissions (13–31%) made the largest contributions to the PM_2.5 mass concentrations at all of the monitoring sites except for the residential Lake Forest site, where wood smoke contributed the most PM_2.5 mass (31%). Other identified sources include diesel vehicle emissions, airborne soil, residual oil combustion, sea salt, aged sea salt, metal processing, and cement kiln. Residual oil combustion sources identified at multiple monitoring sites point clearly to the Port of Seattle suggesting ship emissions as the source of oil combustion particles. In addition, the relationship between sulfate concentrations and the oil combustion emissions indicated contributions of ship emissions to the local sulfate concentrations. The analysis of spatial variability of PM_2.5 sources shows that the spatial distributions of several PM_2.5 sources were heterogeneous within a given air shed.