A novel additive for the reduction of acid gases and NO(x) in municipal waste incinerator flue gas.

The reduction of SO2, HCl, and NO(x) concentrations using calcium magnesium acetate (CMA) as a novel sorbent in a simulated municipal waste incinerator flue gas was investigated. The reduction of individual SO2, HCl, and NO(x) concentrations was tested at 850 degrees C and it was found that CMA could reduce the SO2 concentration by 74%, HCl concentration by 64%, or NO(x) concentration by 94%. It was observed that individual SO2 or HCl capture increased with increasing initial oxygen concentration in the reacting gas or increasing sorbent input. NO(x) reduction decreased with increasing initial oxygen concentration in the reacting gas. The simultaneous reduction of SO2, HCl, and NO(x) concentrations by CMA was also investigated. It was found that CMA could simultaneously capture 60% SO2 and 61% HCl and reduce NO(x) concentrations by 26%, when the initial oxygen concentration in the reacting gas was 4%. During the simultaneous reduction of SO2, HCl, and NO(x), it was noted that as the initial oxygen concentration in the reacting gas increased, the efficiency of SO2 capture increased too, but the efficiency of HCl capture and the efficiency of NO(x) destruction decreased.     

An assessment of endocrine disrupting activity changes during wastewater treatment through the use of bioassays and chemical measurements.

The objective of this study was to assess the removal efficiencies of secondary wastewater treatment processes for compounds causing endocrine disrupting activity. The study used bioassays and chemical measurements, such as gas chromatography with mass spectrometry and enzyme immunosorbent assays. A total of seven full-scale water reclamation facilities using different unit operations and two pilot-scale membrane bioreactors were examined. Findings of this study imply that estrogenic disrupting activity in primary effluent is mainly caused by two steroidal hormones (17beta-estradiol and estriol) and, to a lesser extent, by synthetic chemicals, such as bisphenol A, 4-nonylphenol, and 4-tert-octylphenol. During secondary treatment, steroidal hormones were removed to a higher degree than nonylphenol and bisphenol A. The total estrogenic activity was removed by an average of 96%. The remaining concentrations of targeted steroids in secondary effluents, except for estriol, still had the potential to elicit a positive response in the human breast cell cancer assay. For the majority of facilities, the remaining activity was likely attributed to residual concentrations of two steroidal hormones (17beta-estradiol and estriol).     

An immunoassay for metolachlor detection in river water and soil.

An indirect enzyme-linked immunosorbent assay (EIA) for metolachlor (2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)acetamid e) detection in river water and soil was developed using serum obtained from rabbits immunized against the acid of metalaxyl ((N-(2,6-dimethylphenyl)-N-(methoxy-acetyl)-DL-alanine methyl ester) conjugated to bovine serum albumin. The assay had a linear working range from 1 to 50 ng/ml with a mean I50 value of 13.6 ng/ml and a lower detection limit of 2.0 ng/ml. Both the mean interwell and interassay coefficients of variation were less than 4% over the range of the standard curves for samples which had been prepared in phosphate buffered saline (PBS), river water, or soil extract. Assay cross-reactivity to the following four structurally related chloro-acetanilide pesticides were: propachlor (0%), metazachlor (0%), alachlor (23%), and metalaxyl (5,000%). Mean recoveries of metolachlor in spiked (2.0 to 32.0 ng/ml range) PBS, river water, and soil extract were 102%, 103%, and 110%, respectively. Soil samples were taken over a 56-d period from field plots treated with metolachlor and analyzed by GC and EIA. The correlation coefficient for comparison of the two methods was 0.96 with the slope of the linear regression line being 0.78. Furthermore, no statistical difference (P less than 0.05) was found between the dissipation curves of metolachlor derived from GC data versus EIA data.     

Whose landcare? Observations on the role of 'community' in the Australian landcare programme

Australia's 'Landcare' programme is a community-based, participatory programme established by government, to tackle the problem of land degradation. It has been hailed by some as the world's most imaginative sustainable development policy. In light of the agreements reached at the Rio Earth Summit, particularly Agenda 21, the experience of established programmes such as Landcare may be useful to those beginning to grapple with the call for greater community involvement. This paper explores briefly the presentation and enactment of ideas of 'community' and 'ownership' in the Landcare programme and finds that, contrary to the rhetoric, community 'ownership' of Landcare is, in practice, ambiguous.     

Application of slipstreamed air pollution control devices on waste-as-fuel processes

The recovery of energy from the combustion of municipal solid wastes is becoming an attractive alternative as landfill space becomes scarce and the availability of fossil fuels decreases. Particulate emissions from “waste-as-fuel” processes, however, may differ significantly in chemical and physical properties from particulate emissions produced by firing only coal. Such differences can affect the design and operation of air pollution control equipment. Presented in this paper are the results of a 2-month test program at Ames, Iowa, with a mobile electrostatic precipitator (ESP) and a mobile scrubber supplied by the U.S. Environmental Protection Agency (EPA), Industrial Environmental Research Laboratory (IERL), Research Triangle Park. PEDCo Environmental, Inc., and Acurex Corporation jointly conducted the test program to examine the effect of burning refuse-derived fuel (RDF) on particulate and heavy metal control efficiencies. The mobile ESP was used only as a primary control device, whereas the mobile scrubber was tested both upstream and downstream of the existing full-scale ESP. This paper also presents a status report on a PEDCo test program with a pilot fabric filter at Ames.     

Efficiency of energy delivery systems: II. Estimating energy costs of capital equipment

Procedures are developed and summarized that allow the calculation of the energy required to manufacture and install capital equipment, such as the material needed for a coalfired power plant. Three methods are available, each with certain strengths and weaknessess The first uses both literature value and national manufacturing statistics, the second uses a previously developed technique that disaggregates energy use according to how much each industry buys from all other industries, and the third technique is based on the average national relation between energy use and dollar flow. The most important differences between estimates of energy use by the different techniques relates to the inclusion or exclusion of labor and indirect expenditures rather than to differences in the data bases of the three techniques.