Influence of Short Central PEO Segment on Hydrolytic and Enzymatic Degradation of Triblock PCL Copolymers

Hydrolytic, enzymatic degradation and composting under controlled conditions of series of triblock PCL/PEO copolymers, PCEC, with central short PEO block (M _n 400 g/mol) are presented and compared with homopolymer (PCL). The PCEC copolymers, synthesized via ring-opening polymerization of ε-caprolactone, were characterized by ¹H NMR, quantitative ¹³C NMR, GPC, DSC and WAXS. The introduction of the PEO central segment (<?2 wt%) in PCL chains significantly affected thermal degradation and crystallization behavior, while the hydrophobicity was slightly reduced as confirmed by water absorption and moisture uptake experiments. Hydrolytic degradation studies in phosphate buffer after 8 weeks indicated a small weight loss, while FTIR analysis detected changes in crystallinity indexes and GPC measurements revealed bulk degradation. Enzymatic degradation tested by cell-free extracts containing Pseudomonas aeruginosa PAO1 confirmed high enzyme activity throughout the surface causing morphological changes detected by optical microscopy and AFM analysis. The changes in roughness of polymer films revealed surface erosion mechanism of enzymatic degradation. Copolymer with the highest content of PEO segment and the lowest molecular weight showed better degradation ability compared to PCL and other copolymers. Furthermore, composting of polymer films in a model compost system at 37 °C resulted in significant degradation of the all synthesized block copolymers.     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

Contamination of marine fauna by chlordecone in Guadeloupe: evidence of a seaward decreasing gradient

Chlordecone is an organochlorine pesticide, used in the Lesser Antilles from 1972 to 1993 to fight against a banana weevil. That molecule is very persistent in the natural environment and ends up in the sea with runoff waters. The objective of the present study is to evaluate the level of contamination in several trophic groups of marine animals according to their distance from the source of pollution. Samples of suspended matter, macroalgae, herbivorous fishes, detrivorous crustaceans, zooplanktivorous fishes, first- and second-order of carnivorous fishes, and piscivorous fishes have been collected in two sites, located downstream the contaminated sites (Goyave and Petit-Bourg), in three marine habitats (coastal mangroves, seagrass beds located 1.5 km from the shoreline, and coral reefs at 3 km offshore). Animals collected in mangroves were the most contaminated (mean concentrations 193 μg kg^?1 in Goyave and 213 μg kg^?1 in Petit-Bourg). Samples from seagrass beds presented intermediate concentrations of chlordecone (85 μg kg^?1 in Goyave and 107 μg kg^?1 in Petit-Bourg). Finally, samples from coral reefs were the less contaminated (71 μg kg^?1 in Goyave and 74 μg kg^?1 in Petit-Bourg). Reef samples, collected 3 km offshore, were two to three times less contaminated than those collected in mangroves.     

A multivariate examination of ‘artificial mussels’ in conjunction with spot water tests in freshwater ecosystems

Metal pollution in aquatic systems is considered a serious environmental issue globally due to their ability to accumulate in aquatic environments. Wetlands are vulnerable to this pollution as they are known to trap toxins, removing them from the water. Artificial mussel technology, originally developed for marine environments, was applied to this freshwater system and spot water samples were collected. The Nyl River floodplain (Ramsar classified) is one of the largest and most ecologically significant wetlands in South Africa. The aims of this study were to determine metal contamination along the Nyl River system by means of artificial mussels (AM) and water ICP-MS analysis and to determine whether the use of AMs in conjunction with spot water testing could give more insight into the pollution in freshwater wetlands. The concentrations of Al, Cd, Cr, Co, Cu, Fe, Mn, Ni, Pb and Zn were determined at seven sites. It was determined that the levels accumulated by the AMs differed in spatial and temporal trends when compared to spot water samples. It was determined that there were high levels of some metals found in the spot water tests that were not corroborated by the AMs results, which could indicate isolated pollution events. The use of AMs in conjunction with spot water testing was determined to be beneficial in gaining deeper insight into water metal conditions in dynamic freshwater systems.     

Carbon and nitrogen mineralization in Vertisol as mediated by type and placement method of residue

Selection of appropriate residue application method is essential for better use of biomass for soil and environmental health improvement. A laboratory incubation experiment was conducted for 75 days to investigate C and N mineralization of residues of soybean (Glycine max L.), chickpea (Cicer arietinum L.), maize (Zea mays L.), and wheat (Triticum aestivum L.) placed on the soil surface and incorporated into the soil. The residue of soybean and chickpea had a greater decomposition rate than that of maize and wheat, despite of their placements. Higher rate of decomposition of the residue of soybean and chickpea was recorded when it was kept on the soil surface while soil incorporation of residue of wheat and maize resulted in faster decomposition. Therefore, these findings could be used as guidelines for management of crop residue application in farmland to improve soil and environmental quality.     

Organochlorine contaminants in the Vistula Lagoon sedimentation zone as possible source of lagoon recontamination

The presented results include decade of monitoring of the Vistula Lagoon waters and have been supplemented by the determination of chlorinated compounds, as well as on concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the sedimentation zone. Monitoring of river waters entering the Polish part of the lagoon and the lagoon waters confirmed the presence of plant protection chemical; the largest contributors has lindane (34%) and DDT_total (21%); the same as for sediments were dominate lindane (19%) and DDT_total (14%) within pp-DDT isomer dominate (13%). In the lagoon water, PCDD/Fs were determined within a range of 1.5–5.6 ng dm^?3, leading to average toxicity of 0.18?±?0.13 ng TEQ·dm^?3. In sediments, their concentrations fell within a range of 22.7–405.7 ng kg^?1 dw and the average toxicity of the lagoon sediments was set at 5.00?±?1.98 ng TEQ·kg^?1 dw. Both in water and sediments, the greatest share among PCDD/Fs has octa-chlorodibenzodioxin. Due to the hydromorphological conditions of the lagoon, the waters are mixed to the bottom causing the surface layer of sediment to become remobilized—this is suggested as the key factor when it comes to water recontamination and increased access of POPs to marine organisms.     

Development and implementation of eco-genomic tools for aquatic ecosystem biomonitoring: the SYNAQUA French-Swiss program

The effectiveness of environmental protection measures is based on the early identification and diagnosis of anthropogenic pressures. Similarly, restoration actions require precise monitoring of changes in the ecological quality of ecosystems, in order to highlight their effectiveness. Monitoring the ecological quality relies on bioindicators, which are organisms revealing the pressures exerted on the environment through the composition of their communities. Their implementation, based on the morphological identification of species, is expensive because it requires time and experts in taxonomy. Recent genomic tools should provide access to reliable and high-throughput environmental monitoring by directly inferring the composition of bioindicators’ communities from their DNA (metabarcoding). The French-Swiss program SYNAQUA (INTERREG France-Switzerland 2017–2019) proposes to use and validate the tools of environmental genomic for biomonitoring and aims ultimately at their implementation in the regulatory bio-surveillance. SYNAQUA will test the metabarcoding approach focusing on two bioindicators, diatoms, and aquatic oligochaetes, which are used in freshwater biomonitoring in France and Switzerland. To go towards the renewal of current biomonitoring practices, SYNAQUA will (1) bring together different actors: scientists, environmental managers, consulting firms, and biotechnological companies, (2) apply this approach on a large scale to demonstrate its relevance, (3) propose robust and reliable tools, and (4) raise public awareness and train the various actors likely to use these new tools. Biomonitoring approaches based on such environmental genomic tools should address the European need for reliable, higher-throughput monitoring to improve the protection of aquatic environments under multiple pressures, guide their restoration, and follow their evolution.     

Effects of Topographical Heterogeneity and Dispersal Limitation on Species Turnover in a Temperate Mountane Ecosystem: a Case Study in the Henan Province,China

Species turnover patterns can be inconsistent due to differences in the dispersal ability of different growth forms. Here, species of trees, shrubs, herbs, and bryophytes in the Xiaoqinling National Nature Reserve in China were analyzed to determine patterns of species turnover along an elevation and spatial gradient. Variance partitioning was used to assess the relative contribution of topographic heterogeneity and dispersal limitation to species turnover. Our results suggest that the effect of dispersal limitation is more important than topographic heterogeneity on species turnover in temperate mountane ecosystems in the study area. Dispersal limitation has a greater effect on trees species turnover than on shrubs, herbs or bryophytes species turnover.     

Ecophysiology of Steppe Mouse Subspecies <Emphasis Type="Italic">Mus spicilegius spicilegus</Emphasis>, Peteni, 1883 (Rodentia,Mammalia) at the South Boundary of its Distribution

Diet, food preferences and main ecophysiological characteristics such like energy requirements and thermoregulation characteristics of Mus spicilegus spicilegus (Petenyi, 1882) were studied. The most preferred foods for the mice were seeds of weed species that composed more than 85% of their diet. The results of food selection experiments shows that the total daily consumption by mice is 2.77 ± 0.76 g/animal/day or 5.5 kJ/g/day or 84.9 kJ/animal/day. From the total daily energy consumption 16.4% go back to nature in the form of feces and urine and the rest 83.6% animals utilized for assimilation. The results of the temperature preferences for Mus s. spicilegus shows preferred temperature zone from around 26 to 36°C where mice spent about 72% of the experimental time. The lowest value of oxygen consumption for resting metabolism rate (RMR) was registered at 30°C–3.20 ± 0.71 cm³ O₂/g/h. It is possible to consider that the thermoneutral zone is around these temperature values. The obtained results give reason to conclude that from an ecophysiologycal point of view the climate in the south boundary of distribution provides optimal conditions for species development. The main cause for population decreasing probably is the loss of open habitats including natural steppe grasslands.     

Assessment of the State of Lung Lichen, <Emphasis Type="Italic">Lobaria pulmonaria</Emphasis> (L.) Hoffm., in Forest Communities with Different Times Since Disturbance in the Northeast of European Russia

Quantitative parameters of cenopopulations of Lobaria pulmonaria, an endangered cyanolichen, have been studied in spruce phytocenoses of Karelia recovering after disturbance through the successional stage of aspen stands for a period ranging from 80 to 450 years. The results show that, as the time since disturbance increases, the total number of L. pulmonaria thalli and the number of colonized substrate units increase as well, with no stabilization of these parameters being observed in the series of communities studied. The total area of thalli in the phytocenoses is restored within approximately 200 years after the last disturbance. In old-growth forests (>400 years), L. pulmonaria thalli colonize a broad spectrum of tree species in different life states, including lower branches of young spruce trees. Even if they serve as temporary substrates, this can markedly strengthen the potential of the species for further expansion within the community in case of shortage in the main phorophyte (aspen). Thus, the proportion of regressive populations decreases, while that of colonizing populations increases, which is indicative of successful reproduction of the species.