Adaptation strategies for maize cultivation under climate change in Iran: irrigation and planting date management

Climate change is affecting the productivity of crops and their regional distribution. Strategies to enhance local adaptation capacity are needed to mitigate climate change impacts and to maintain regional stability of food production. The objectives of this study were to simulate the climate change effects on phenological stages, Leaf Area Index (LAI), biomass and grain yield of maize (Zea mays L.) in the future and to explore the possibilities of employing irrigation water and planting dates as adaptation strategies to decrease the climate change impacts on maize production in Khorasan Razavi province, Iran. For this purpose, we employed two types of General Circulation Models ((United Kingdom Met. Office Hadley Center: HadCM3) and (Institute Pierre Simon Laplace: IPCM4)) and three scenarios (A1B, A2 and B1). Long Ashton Research Station-Weather Generator (LARS-WG) was used to produce daily climatic parameters as one stochastic growing season for each projection period. Also, crop growth under projected climate conditions was simulated based on the Cropping System Model (CSM)-CERES-Maize. The results of model evaluation showed that LARS-WG had appropriate prediction for climatic parameters. Time period from cultivation until anthesis and maturity were reduced in majority of scenarios as affected by climate change. The results indicated that the grain yield of maize may be reduced (11 % to 38 %) as affected by climate change based on common planting date in baseline and changed (?61 % to 48 %) in response to different irrigation regimes in the future climate change, under all scenarios and times. In general, earlier planting date (1 May) and decreasing irrigation intervals in the anthesis stage (11 applications) caused higher yield compared with other planting dates due to adaption to high temperature. Based on our findings, it seems that management of irrigation water and planting dates can be beneficial for adaptation of maize to climate change in this region.     

Probabilistic health risk assessment based on Monte Carlo simulation for pesticide residues in date fruits of Iran

Environmental Science and Pollution Research - The validation of an analytical procedure based on the quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach is presented for...     

Perception,knowledge and attitude towards environmental issues and management among residents of Al-Suwaiq Wilayat,Sultanate of Oman

The purpose of this study was to determine residents’ perception, knowledge and attitude towards environmental issues and management in the Al-Suwaiq Wilayat (administrative zone) of Al-Batinah North, Sultanate of Oman. For this purpose, a questionnaire was used with questions on issues related to environment and surveyed across 109 households in the Wilayat following a random sampling method in early 2015. The results show that education, health-related infrastructure and unemployment are ranked as most important issues for government attention today and in coming 10 years besides their concern for the environment. Resident’s perceptions on most important environmental issues were concerned about solid-waste pollution, degradation of coastal areas, saltwater intrusion and land degradation. The sources for environmental information, government agencies, local media and schools were regarded as most reliable. Top environmental priorities were suggested to deal with enforcement of regulations, provide effective environmental awareness and education programs. Further, it is suggested that additional studies should be conducted such as ‘State of Environment Reporting’, thereby such reporting, for instance would provide some form of verification of reported behaviour and improved knowledge.     

Spindle speed variation and adaptive force regulation to suppress regenerative chatter in the turning process

Chatter suppression in machining processes results in more material removal rate, high precision and surface quality. In this paper, two control strategies are developed to suppress chatter vibration in the turning process including a worn tool. In the first stage, a sinusoidal spindle speed variation around the mean speed is modulated to disturb the regenerative mechanism. The optimal amplitudes of the speed modulations are found based on a genetic algorithm such that the input energy to the turning process is minimized. In the second stage, to improve the response of the system which is associated with small ripples under the steady state condition, an adaptive controller is designed. In this stage, the provided external force (e.g., by a piezo-actuator) is the input variable. Results are provided for each control strategy. It is shown that if both control approaches are applied simultaneously, chatter vibration is suppressed in less time without any ripples at the steady state condition.     

Configuration influence in relation to fluid flow of venturi system

Due to its simplicity and accurately measuring the flow rate, the venturi system is a special kind of pipe that is widely used in various applied fluid mixtures. One of the venturi system's important applications is ejectors devices that accurately facilitate adding air to water to sustain oxygen demand target levels in many waterworks engineering systems. This study aims to improve venturi system measurement accuracy through experimental investigation and analytical analysis for the venturi system conditional configuration parameters effect on target aeration operational efficiency. In the experiment work, different runs are implemented to characterize the performance of such aerators by describing the impact of venturi characteristics and configurations, including water flow rate, air inlets orifices diameters, inlet velocities, throat lengths, inlet angles, outlets angles, and outlet diameters on aeration efficiency. Results show that the venturi air vent diameter is an important governing parameter for determining aeration performance value. Additionally, an indicated increase in aeration performance with an increasing throat length to its diameter ratio. Meanwhile, the results revealed a varying noted effect of the venturi system characteristics and configurations on aeration performance. Moreover, the equations that relate venturi system configuration and Reynolds numbers with the aeration operational performance are developed to facilitate the target accurate aeration efficiency estimation.     

Screening level modeling of long-term impact of petroleum hydrocarbon contamination on fresh groundwater lenses in the Arabian Gulf region

The Gulf War in 1991 created an environmental catastrophe, one of the major consequences of which was setting several oil wells on fire in the Arabian Gulf area. The total oil spilled as a result of the damaged wells was about 3.5 × 10⁶ m³. Out of these, 3.3 × 10⁶ m³ of oil was recovered and exported. The rest was left behind as it was not economical to collect. The oil left behind was subject to severe weathering over the past ten years. Soil and subsurface contamination pose a serious risk to the quality of the already scarce fresh groundwater resources in the area which was subject to oil spill in the study region. This paper presents the computer modeling activities carried out towards simulating the transport of the hydrocarbon contamination of the fresh groundwater resources at a study area in the Arabian Gulf region, and predicting the contamination levels at the fresh groundwater lenses in the area in the future, should current contamination levels persist in the soil and groundwater. The modeling activities relied on both semi-analytical and numerical flow and transport models.     

Assessment of human health risks and pollution index for heavy metals in farmlands irrigated by effluents of stabilization ponds

Areas contaminated with heavy metals can pose major risks to human health and ecological environments. The aims of this study are to assess human health risk and pollution index for heavy metals in agricultural soils irrigated by effluents of stabilization ponds in Birjand, Iran. The results revealed that the levels of Cr, Mn, Zn, Fe, Cu, Cd, and Pb were in range of 70.3–149.65, 355–570, 31.15–98.45, 23,925–29,140, 22.75–25.95, 0.17–6.51, and 8.5–23.5 mg/kg in topsoils, respectively. Total hazard index values from heavy metals through three exposure routes for adults and children were 9.13E−01 and 1.10, respectively, indicating that there was non-carcinogenic risk for children. The total risk of carcinogenic metals (Cr, Cd, and Pb) through the three exposure routes for adults and children was 1.06E−04 and 9.76E−04, respectively, which indicates that the metals in the soil will not induce carcinogenic risks to these age groups. Pollution levels of heavy metals in soil samples including enrichment factor (EF), contamination factor (CF), pollution load index (PLI), and geo-accumulation index (Igeo) showed heavy metal contamination of agricultural soils. The results of the present study provide basic information about heavy metal contamination control and human health risk assessment management in the study area.     

Assessing energy efficiencies,economy, and global warming potential (GWP) effects of major crop production systems in Iran: a case study in East Azerbaijan province

Environmental Science and Pollution Research - Efficient use of energy in farming systems is one of the most important implications for decreasing greenhouse gas (GHG) emissions and mitigating...     

Investigation on diazinon and oxydemeton-methyl residues in cucumbers grown in Kerman greenhouses

Pesticides are considered as the most polluting substances. The residue of pesticides in agricultural crops, especially in greenhouse harvests, has been reported critical. Cucumber, considered as a vegetable, is an agricultural product which is commonly found in the Iranian food basket. The current study aims to assess the level of diazinon and oxydemeton-methyl existing in cucumbers sampled from Kerman greenhouses. The pesticide residue was extracted by acetone and dichloromethane. The extracts were cleaned up according to the solid-phase extraction method. The pesticide residues were then determined by capillary gas chromatography with nitrogen-phosphorus detection. The recoveries were 83 and 85 %, the limit of detection was 0.028 and 0.034 mg/kg, and the limits of qualification were 0.093 and 0.113 mg/kg for diazinon and oxydemeton-methyl in cucumber samples, respectively. The median of diazinon residue was detected 0.582 mg/kg, which was 11.64 times the national maximum residue limit (MRL) (0.05 mg/kg), and the median for oxydemeton-methyl was 1.910 mg/kg, being 1.91 times the MRL (1 mg/kg).