Flow transiency on analytical modeling of subsurface solute transport

Environmental Science and Pollution Research - Groundwater flow velocity and dispersivity might be temporally or spatially variable rather than constant. In this paper, linearly-asymptotically or...     

Bioaerosols concentrations in working areas in biomethanization facilities

This study sought to fill the gap in information about the type and the concentration of bioaerosols present in the air of biomethanization facilities (BF). Evaluation of bioaerosol composition and concentration was achieved in two biomethanization facilities located in Eastern Canada, during summer and winter. In order to have a thorough understanding of the studied environment, the methodology combined culture of bacteria and molds, qualitiative polymerase chain reaction (qPCR) for specific microorganisms, endotoxin quantification, and next-generation sequencing (NGS) for bacterial diversity. Results revealed that workers in biomethanization facilities are exposed to bioaerosols and pathogenic microorganisms similar to those found in composting plants. However, human exposure levels to bioaerosols are lower in BF than in composting plants. Despite these differences, use of personal protective equipment is recommended to lower the risks of health problems.

Implications: Biomethanization is a new technology used in eastern Canada for waste management. In the next few years, it is expected that there will be an expansion of facilities in response of tight governmental regulations. Workers in biomethanization facilities are exposed to various amounts of bioaerosols composed of some harmful microorganisms. Therefore, monitoring this occupational exposure could be an interesting tool for improving worker’s health.     

Seasonal variation of Sarpa salpa fish toxicity, as related to phytoplankton consumption, accumulation of heavy metals, lipids peroxidation level in fish tissues and toxicity upon mice

The aim of this work was to investigate for Sarpa salpa the seasonal trend in the food sources, heavy metals bioaccumulation and the oxidative stress in the organs. In addition, the toxicity was assessed by mouse bioassay of extract of the fish's organs collected in autumn, the peak of occurrence of hallucinatory syndrome. The toxicity was further studied for compounds present in epiphyte collected from the sea at the end of spring and in summer that are digested by the S. salpa in these seasons. We observed a higher lipid peroxydation in different tissues of S. salpa compared to the control fish Diplodus annularis. Furthermore, heavy metals accumulation in organs of these fish showed a significant variation between the two species (P?<?0.05). The lethal dose (LD50%) determined for crude ciguatoxin (neurotoxins) extracts of viscera, liver, brain and muscle of S. salpa were as follows: 1.217, 2.195, 14.395, 18.645 g/kg mouse, respectively. We noticed a significant correlation (P?<?0.05) between the total amount of toxic dinoflagellates and the level of TBARS in the liver, the brain and the muscle, this for all seasons and all sizes. Moreover, the cytotoxic effect observed for epiphytes extract confirms the transfer of toxins originating from toxic dinoflagellates, which live as epiphytes on P. oceanica leaves, to the fish by grazing. Our work indicates that, toxic phytoplanktons and heavy metals accumulation are responsible for the increase of oxidative stress in the organs of S. salpa. Hence, the edible part of S. salpa, especially the viscera and liver, can cause a threat to human health, and consumption should, for this reason, be dissuaded.     

Purification of industrial phosphoric acid (54 %) using Fe-pillared bentonite

The current problem of excess impurities in industrial phosphoric acid (IPA) 54 % P₂O₅ makes phosphates industries look toward low-cost but efficient adsorbents. In the present study, iron-oxide-modified bentonite (Fe-PILB) was prepared and investigated as a possible adsorbent for the removal of organic matter (OM) like humic acid (HA), chromium (Cr(III)), and zinc (Zn(II)) from IPA aqueous solutions. These adsorbents were characterized using XRD, TEM, and BET. The adsorption of impurities is well described by the pseudo-second-order model. The results indicate that Fe-PILB has a good ability to resist co-existing anions and the low-pH condition of IPA and owns a relatively high-removal capacity of 80.42 and 25 % for OM, Cr(III), and Zn(II). The mechanism of adsorption may be described by the ligand and ion exchange that happened on the active sites. The selected order of adsorption OM?>?Cr³⁺?>?Zn²⁺ showed the importance of the competitive phenomenon onto bentonite materials’ pore adsorption. For the adsorption of OM at the low pH of IPA, H-bond complexation was the dominant mechanism. From the adsorption of heavy metals and OM complex compounds contained in IPA 54 % on Fe-PILB, the bridging of humic acid between bentonite and heavy metals (Zn(II) or Cr(III)) is proposed as the dominant adsorption mechanism (bentonite-HA-Me). Overall, the results obtained in this study indicate Fe-pillared bentonite possesses a potential for the practical application of impurity (OM, Zn(II), and Cr(III)) removal from IPA aqueous solutions.     

Removal of cyanide in aqueous solution by oxidation with hydrogen peroxide in presence of activated alumina

This work is dedicated to the removal of free cyanide from aqueous solution by oxidation with hydrogen peroxide H₂O₂ catalyzed by neutral activated alumina. Effects of initial molar ratio [H₂O₂]₀/[CN^?]₀, catalyst amount, pH, and temperature on cyanide removal have been examined. The presence of activated alumina has increased the reaction rate showing thus, a catalytic activity. The rate of removal of cyanides increases with rising initial molar ratio [H₂O₂]₀/[CN^?]₀ but decreases at pH 10 to 12. Increasing the alumina amount from 1.0 to 30 g/L has a beneficial effect, and increasing the temperature from 20 °C to 35 °C improves cyanide removal. The kinetics of cyanide removal has been found to be of pseudo-first-order with respect to cyanide and the rate constants have been determined.     

Chemical and isotopic investigation of groundwater in Tahta region,Sohag-Egypt

Chemical and isotopic investigations indicate that the recharge source for the groundwater in the Tahta district, adjacent to the Nile, is mainly from the Nile water seeping from irrigation channels. The water's chemical type is sodium bicarbonate, with values of oxygen-18 and deuterium close to that of Nile water. Another minor source of recharge to the far west of the Nile bank is palaeowater. This water's chemical type is sodium sulphate and sodium chloride. The change of water quality in some groundwater samples could be due to the extensive use of fertilizers to improve soil characteristics in new reclamation projects. In addition, these wells are slightly depleted in oxygen-18, deuterium and tritium. Recommendations for the periodic monitoring of groundwater quality for proper use are given.     

Artificial intelligence for waste management in smart cities: a review

Environmental Chemistry Letters - The rising amount of waste generated worldwide is inducing issues of pollution, waste management, and recycling, calling for new strategies to improve the waste...