还原-光度法测定空气中二氧化硫

在 pH 5 0～ 6 2、甲醛 -邻苯二甲酸氢钾介质和沸水浴中 ,微量二氧化硫能迅速还原三价铁为二价铁 ,使生成的邻菲口罗啉 -铁 (Ⅱ )铬合物量增加 ,导致溶液颜色变深 ,据此测定二氧化硫的含量。方法测定范围为 0mg/L～1 4mg/L ,检测限为 0 4mg/L。用于测定空气中二氧化硫 ,获得了满意的结果     

Regional differences and sources of organochlorine pesticides in soils surrounding chemical industrial parks

Concentrations of organochlorine pesticides (OCPs; dichlorodiphenyltrichloroethanes (DDTs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB)) were investigated in 105 soil samples collected in vicinity of the chemical industrial parks in Tianjin, China. OCP concentrations significantly varied in the study area, high HCH and DDT levels were found close to the chemical industrial parks. The intensity of agricultural activity and distance from the potential OCP emitters have important influences on the OCP residue distributions. Principal component analysis indicates that HCH pollution is a mix of historical technical HCH and current lindane pollution and DDT pollution input is only due to technical DDT sources. The significant correlations of OCP compounds reveal that HCHs, DDTs and HCB could have some similar sources of origin.     

Biodiesel production from waste oil feedstocks by solid acid catalysis

Biodiesel is a non-toxic and biodegradable substitute for petroleum-based diesel. However, it is impractical to use refined edible oils to produce biodiesel due to its high cost and priority for food products, especially in China, while waste oils with high free fatty acids (FFAs) can be considered as the raw materials. In the present work, a solid acid catalyst comprising SO₄²⁻/TiO₂–SiO₂ was prepared, characterized and studied for its activity for the production of biodiesel from several low cost feedstocks with high FFAs. The solid acid catalyst can be recycled, easily removed and can simultaneously catalyze esterification and transesterification. The influence of reaction parameters was studied, and the optimized reaction parameters are reaction temperature 200 °C, molar ratio of methanol to oil 9:1 and catalyst concentration 3 wt.%. The catalyst showed good stability. A continuous process for biodiesel production from cheap raw feedstocks was proposed, and a 10,000-tonnes/year biodiesel production demonstration plant has been built.     

The collection system for residential recyclables in communities in Haidian District, Beijing: a possible approach for China recycling

Recycling and reusing recyclables is an important way to solve the municipal solid waste (MSW) problem. As the collection of solid waste takes up the largest percentage of MSW management budgets, improving the collection of recyclables is important. Since the decline of government-run waste buying depots in the late 1980s, the collection of recyclables from households and waste deposit sites in China is done by buyers with small informal bases and waste pickers, who are usually unskilled rural people who have come to the cities. Because of this, the current system is seen to have social problems. So, the recyclable collection system has both social as well as economic significance. China is in the process of rapid industrialization and urbanization, and a new mode of community collection system is emerging. It operates by market mechanisms, with waste collection companies that are supported by the municipal government, establishing recycle service sites, and employing workers to buy recyclables door-to-door. This paper is a case study of the new system in the Haidian District, Beijing. It summarizes the system, compares it to experiences in other countries and discusses whether the new approach contributes to resources recycling in China.     

Rhamnolipid morphology and phenanthrene solubility at different pH values

The effect of pH and rhamnolipids on the solubility of phenanthrene was investigated in a sand-water system. Batch phenanthrene solubilization experiments in this system showed that the highest phenanthrene solubility occurred at pH 5 in the presence of 240 and 150 mg L(-1) rhamnolipids. As the pH was increased from 5 to 7, the apparent solubility of phenanthrene decreased and then stabilized from pH 7 to 8. At pH 4, a dramatic decrease in phenanthrene solubility was observed. This result is in contrast to previous findings obtained in an aqueous system without soil particles. To investigate the reason for this decrease, the critical micelle concentrations (CMCs) were measured in the presence or absence of sand particles, and the maximum amount of sorbed biosurfactant at each pH was calculated based on the differences of the two CMC values. More rhamnolipid molecules were lost by the sorption into sand particles at pH 4 than at other pH values; this explains the dramatic decrease of solubility at pH 4 in the sand-water system. To confirm the explanation for the different solubilizing capacity that results from the structural change of biosurfactant aggregate, cryo-transmission electron microscopy was used. Micrographs showed that the rhamnolipid morphology changed from large lamellar sheets, to vesicle, and then to micelle as the pH increased. The large and multilamellar vesicles at pH 5 were considered to be the most effective structure for the solubilization of phenanthrene.     

Application of a magnetotactic bacterium, Stenotrophomonas sp. to the removal of Au(III) from contaminated wastewater with a magnetic separator

In this study, the feasibility of applying a magnetotactic bacterial isolate (MTB), Stenotrophomonas sp. to the removal of Au(III) was investigated. Biosorption experiments showed that Au(III) biosorption capacity exhibited no significant difference in the initial pH range of 1.0-5.5, while decreased more significantly in the initial pH range of 5.5-13.0. Langmuir isotherm indicated that the maximum Au(III) biosorption capacity of Stenotrophomonas sp. were 506, 369 and 308 mg g(-1) dry weight biomass at the initial pH values of 2.0, 7.0 and 12.0, respectively. Thiourea was proved to be an effective desorbent to recover Au from the MTB biomass and 91% Au adsorbed on the biomass could be recovered at equilibrium when the thiourea concentration was 0.8M. The magnetic separator developed by our research team used for separating Au loaded MTB biomass showed high separation efficiency, with 100% biomass removed at the magnetic intensity of 1200 Gs in 180 min. The analyses from FTIR and XRD further confirmed that the reduction of Au(III) to Au(0) by the reductants on the MTB biomass occurred, and the deposition of nano-crystal Au(0) particles, ranging from 24.7 to 31.4 nm, could be estimated on the biomass surface.     

Catalytic reduction of sulfur dioxide with carbon monoxide over tin dioxide for direct sulfur recovery process

SO(2) reduction by CO over SnO(2) catalyst was studied in this work. The parameters were the reaction temperature, space velocity (GHSV) and [CO]/[SO(2)] molar ratio. The optimal temperature, GHSV and [CO]/[SO(2)] molar ratio were 550 degrees C, 8000 h(-1) and 2.0, respectively. Under these conditions, the SO(2) conversion and sulfur selectivity were about 78% and 68%, respectively. The following reaction pathway involving two mechanisms was proposed in SO(2) reduction by CO over SnO(2) catalyst: in the first step involving Redox mechanism, the elemental sulfur was produced by the mobility of the lattice oxygen between SO(2) and SnO(2) surface. In the second step, COS was formed by the side reaction between elemental sulfur and CO or metal sulfide and CO. In the third step involving COS intermediate mechanism, the abundant elemental sulfur was produced by the SO(2) reduction by COS which was produced in the second step and was more effective reducing agent than CO.     

Exploration and exploitation of food sources by social insect colonies: a revision of the scout-recruit concept

Social insect colonies need to explore and exploit multiple food sources simultaneously and efficiently. At the individual level, this colony-level behaviour has been thought to be taken care of by two types of individual: scouts that independently search for food, and recruits that are directed by nest mates to a food source. However, recent analyses show that this strict division of labour between scouts and recruits is untenable. Therefore, a modified concept is presented here that comprises the possible behavioural states of an individual forager (novice forager, scout, recruit, employed forager, unemployed experienced forager, inspector and reactivated forager) and the transitions between them. The available empirical data are reviewed in the light of both the old and the new concept, and probabilities for the different transitions are derived for the case of the honey-bee. The modified concept distinguishes three types of foragers that may be involved in the exploration behaviour of the colony: novice bees that become scouts, unemployed experienced bees that scout, and lost recruits, i.e. bees that discover a food source other than the one to which they were directed to by their nest mates. An advantage of the modified concept is that it allows for a better comparison of studies investigating the different roles performed by social insect foragers during their individual foraging histories. Received: 29 December 1999 / Revised: 25 February 2000 / Accepted: 16 October 2000     

Monitoring of Aerial Pollutants Emitted from Swine Houses in Korea

This on-site survey study was performed to determine the concentrations and emissions of aerial contaminants in the different types of swine houses in Korea and then to present beneficial information available for Korean pig producers to manage optimal air quality in swine house. The swine houses investigated in this research were selected based on three criteria; manure removal system, ventilation mode and growth stage of swine. Mean concentrations of aerial pollutants in swine houses were 8 ppm for ammonia, 300 ppb for hydrogen sulfide, 2 mg m⁻³ for total dust, 0.6 mg m⁻³ for respirable dust, 4 log(cfu m⁻³) for total airborne bacteria and 3 log(cfu m⁻³) for total airborne fungi, respectively. Mean emissions based on pig (liveweight; 75 kg) and area (m²) were 250 and 340 mg h⁻¹ for ammonia, 40 and 50 mg h⁻¹ for hydrogen sulfide, 40 and 50 mg h⁻¹ for total dust, 10 and 15 mg h⁻¹ for respirable dust, 1.0 and 1.3 log(cfu) h⁻¹ for total airborne bacteria and 0.7 and 1.0 log(cfu) h⁻¹ for total airborne fungi, respectively. In general concentrations and emissions of gases were relatively higher in the swine houses managed with deep-pit manure system with slats and mechanical ventilation mode than the different swine housing types whereas those of particulates and bioaerosol were highest in the naturally ventilated swine houses with deep-litter bed system.     

Evaluation of the thermal/optical reflectance method for quantification of elemental carbon in sediments

The IMPROVE thermal/optical reflectance (TOR) method, commonly used for EC quantification in atmospheric aerosols, is applied to soils and sediments and compared with a thermochemical method commonly applied to these non-atmospheric samples. TOR determines elemental carbon (EC) by an optical method, but it also yields thermally defined EC fractions in a 2% O2/98% He oxidizing atmosphere at 550 degrees C (EC1), 700 degrees C (EC2), and 800 degrees C (EC3). Replicate TOR TC, OC, and EC values exhibited precisions of approximately +/-10% as determined from multiple analyses of the same samples. EC abundances relative to total mass concentrations were within the ranges reported by other methods for diesel exhaust soot, n-hexane soot, wood and rice chars, and coals, as well as for environmental matrices. A direct comparison with the chemothermal (CTO) method of Gustafson et al. for ten soil and sediment samples demonstrated that almost all of the OC and EC1 are eliminated, as is part of the EC2. The CTO soot carbon is bounded by the EC3 and EC2+EC3 fractions of the IMPROVE TOR analysis. It might be possible to adjust these fractions to obtain better agreement between atmospheric aerosol and soil/sediment analysis methods. Given its linking the EC measurement in the atmosphere to sediments, the TOR method will not only provide useful information on the explanation and comparison between different environmental matrices, but also can be used to derive information on global cycling of EC.