浅谈提高环境影响评价中工程分析质量

提出如何在社会区域类环境影响评价中提高工程分析质量的措施,以齐齐哈尔市第一医院为例,在工艺流程或产污环节分析中,应重点突出与污染物排放有关的工序和污染物的产生量;现有工程的污染物计算应结合监测和生产状况综合分析;以"清洁生产审计"的观点进行"清洁生产分析";对提出的污染物治理措施应具有可操作性。     

泥水平衡顶管技术在川气东送管道工程中的应用

介绍了泥水平衡顶管施工中采取的改进措施,实践证明,改进后未发生任何安全事故,且比预期提前了18天。     

广州市生活饮用水地表水源地微量元素调查

对广州市秀全、巴江、江村、石门、西村、刘屋洲、南洲和沙湾等主要生活饮用水地表水源地中钼、钴、铍、硼、锑、镍、钒、钛、锡、银和钡等微量元素含量水平进行了调查,并采用单因子污染指数法和内梅罗综合污染指数法对微量元素水质进行了评价。结果表明,硼和锡在所有地表水源地均未检出,铍在部分地表水源地有检出,其他检测项目在所有地表水源地均有检出。整体而言,微量元素含量水平不高,地表水源地由北往南微量元素内梅罗指数呈逐渐降低态势,南部水源地水质优于北部水源地。巴江和西部水源地镍含量相对较高,电镀企业排污监管力度有待进一步加强。     

染料化工废水处理技术及其应用

随着染料工业的发展,其生产废水已成为主要的水体污染源。目前染料已有成千上万种之多,它们不但具有特定的颜色,而且结构复杂,以高分子络合物为多。且生物降解性较低,大多具有潜在毒性,在环境中的归趋依赖于很多未知因子。这些特点致使染料废水难以找到行之有效的处理方法。介绍了几种染料废水的处理技术及其发展趋势,这些研究对染料废水的治理具有一定的指导意义。     

Selective removal of 2,4-dichlorophenoxyacetic acid from water by molecularly-imprinted amino-functionalized silica gel sorbent

A molecularly-imprinted amino-functionalized sorbent for selective removal of 2,4-dichlorophenoxyacetic acid(2,4-D) was prepared by a surface imprinting technique in combination with a sol-gel process.The 2,4-D-imprinted amino-functionalized silica sorbent was characterized by FT-IR,nitrogen adsorption and static adsorption experiments.The selectivity of the sorbent was investigated by a batch competitive binding experiment using an aqueous 2,4-D and 2,4-dichlorophenol(2,4-DCP) mixture or using an aqueous 2...     

Evaluation of the relationship between two different methods for enumeration fecal indicator bacteria： Colony-forming unit and most probable number

Most probable number (MPN) and colony-forming unit (CFU) estimates of fecal indicator bacteria (FIB) concentration are common measures of water quality in aquatic environments. Thus, FIB intensively monitored in Yeongsan Watershed in an attempt to compare two di erent methods and to develop a statistical model to convert from CFU to MPN estimates or vice versa. As a result, the significant di erence was found in the MPN and CFU estimates. The enumerated Escherichia coli concentrations in MPN are greater than those in CFU, except for the measurement in winter. Especially in fall, E. coli concentrations in MPN are one order of magnitude greater than that in CFU. Contrarily, enterococci bacteria in MPN are lower than those in CFU. However, in general, a strongly positive relationship are found between MPN and CFU estimates. Therefore, the statistical models were developed, and showed the reasonable converting FIB concentrations from CFU estimates to MPN estimates. We expect this study will provide preliminary information towards future research on whether di erent analysis methods may result in di erent water quality standard violation frequencies for the same water sample.     

Effects of silica nanoparticles on growth and photosynthetic pigment contents of Scenedesmus obliquus

To assess the aquatic ecosystem safety for silica (SiO2) nanoparticles (NPs), the growth inhibition and photosynthetic pigment contents of Scenedesmus obliquus in logarithm growth phase exposed to SiO2 NPs and SiO2 bulk particles (BPs) suspensions were measured. SiO2 NPs with 10-20 nm diameters were found to be toxic. The 20% effective concentration (EC20) values for 72 and 96 hr were 388.1 and 216.5 mg/L, respectively. The contents of chlorophyll decreased significantly under moderate and high concentratio...     

Regional crop yield, water consumption and water use efficiency and their responses to climate change in the North China Plain

The North China Plain (NCP) is one of the most important regions for food production in China, with its agricultural system being significantly affected by the undergoing climate change and vulnerable with water stress. In this study, the Vegetation Interface Processes (VIP) model is used to evaluate crop yield, water consumption (ET), and water use efficiency (WUE) of a winter wheat (Triticum aestivum L.)–summer maize (Zea mays L.) double cropping system in the NCP from 1951 to 2006. Their responses to future climate scenarios of 21st century projected by the GCM (HadCM3) with Intergovernmental Panel on Climate Change Special Report on Emission Scenario (IPCC SRES) A2 and B1 emissions are investigated. The results show a rapid enhancement of crop yield in the past 56 years, accompanying with slight increment of ET and noticeable improvement of WUE. There exist spatial patterns of crop yield stemmed mainly from soil quality and irrigation facilities. For climate change impacts, it is found that winter wheat yield will significantly increase with the maximum increment in A2 occurring in 2070s with a value of 19%, whereas the maximum in B1 being 13% in 2060s. Its ET is slightly intensified, which is less than 6%, under both A2 and B1 scenarios, giving rise to the improvement of WUE by 10% and 7% under A2 and B1 scenarios, respectively. Comparatively, summer maize yield will gently decline by 15% for A2 and 12% for B1 scenario, respectively. Its ET is obviously increasing since 2050s with over 10% relative change, leading to a lower WUE with more than 25% relative change under both scenarios in 2090s. Therefore, possible adaptation countermeasures should be developed to mitigate the negative effects of climate change for the sustainable development of agro-ecosystems in the NCP.     

A new approach to predicting the maximum temperature in dry drilling based on a finite element model

A new analysis approach is developed to predict the temperature in dry drilling. The working rake angle and the working relief angle which the effect of feed is considered at an arbitrary point in the leading cutting edge of a twist drill are developed for the equivalent model. Then finite element models are developed to predict the drilling temperature based on the equivalent model. Commercial finite element codes Abaqus, Deform 2D and Third Wave Systems AdvantEdge have been used. In simulations, different chip separation models and material models are applied in the three codes. And the effect of the laws of drilling velocities and feed rates on the temperature are investigated by the finite element method. Predicted results of the maximum temperatures by three codes are compared with experiments, respectively. Results indicate that the drilling temperature results of simulations have good agreement to the experimental ones, and the errors are all less than 15%.     

Adsorption of chlorophenols from aqueous solutions by pristine and surface functionalized single-walled carbon nanotubes

The adsorption of six kinds of chlorophenols on pristine, hydroxylated and carboxylated single-walled carbon nanotubes(SWCNTs) has been investigated. Pseudo-first order and pseudo-second order models were used to describe the kinetic data. All adsorption isotherms were well fitted with Langmuir, Freundlich and Polanyi–Manes models, due to surface adsorption dominating the adsorption process. The close linear relationship between log Kowand log Kdsuggested that hydrophobicity played an important role in the adsorption. The SWCNTs' adsorption capacity for chlorophenols was weakened by addition of oxygen-containing functional groups on the surface, due to the loss of specific surface area, the increase of hydrophilicity and the reduction of π–π interaction. The best adsorption capacity of pristine SWCNTs, SWCNT-OH and SWCNT-COOH for six chlorophenols varied from 19 to 84 mg/g, from 19 to 65 mg/g and from 17 to 65 mg/g,respectively. The effect of pH on the adsorption of 2,6-dichlorophenol(2,6-DCP), was also studied. When p H is over the pK aof 2,6-dichlorophenol(2,6-DCP), its removal dropped sharply. When ionic strength increased(Na Cl or KCl concentration from 0 to 0.02 mmol/L),the adsorption capacity of 2,6-DCP on pristine SWCNTs decreased slightly. The comparison of chlorophenols adsorption by SWCNTs, MWCNTs and PAC was made, indicating that the adsorption rate of CNTs was much faster than that of PAC. The results provide useful information about the feasibility of SWCNTs as an adsorbent to remove chlorophenols from aqueous solutions.