Medical geochemistry research in Spišsko-Gemerské rudohorie Mts., Slovakia

This study presents an assessment of the potential impact of geological contamination of the environment on the health of the population in Spišsko-Gemerské rudohorie Mts. (SGR Mts.). The concentration levels of potentially toxic elements (mainly As, Cd, Cu, Hg, Pb, Sb, and Zn) were determined in soils, groundwater, surface water, and stream sediments as well as in the food chain (locally grown vegetables). A medical study included some 30 health indicators for all 98 municipalities of the study area. The As and Sb contents in human fluids and tissues were analyzed in one municipality identified to be at the highest risk. Based on element content, environmental and health risks were calculated for respective municipalities. Out of 98 municipalities 14 were characterized with extremely high environmental risk and 10 were characterized with very high carcinogenic risk from arsenic (groundwater). Extensive statistical analysis of geochemical data (element contents in soils, groundwater, surface water, and stream sediments) and health indicators was performed. Significant correlations between element contents in the geological environment and health indicators, mainly cancer and cardiovascular diseases, were identified. Biological monitoring has confirmed the transfer of elements from the geological environment to human fluids and tissues as well as to the local food chain.     

电子垃圾拆解废渣-土壤-蔬菜中多氯联苯污染特征与健康风险评估

为研究某电子垃圾拆解区废渣-土壤-蔬菜中多氯联苯(PCBs)污染特征及对人体的潜在健康风险.对电子垃圾废渣样品采样3个、废渣旁的农田土壤和蔬菜分别采样10个和18个(油麦菜6个、四季豆6个和圆白菜6个).废渣、土壤和蔬菜中PCBs含量测定采用高分辨气相色谱-质谱法.结果表明,总PCBs水平:废渣(11 938ng·g-...     

Protection of the vehicle cab environment against bacteria, fungi and endotoxins in composting facilities

Microbial quality of air inside vehicle cabs is a major occupational health risk management issue in composting facilities. Large differences and discrepancies in protection factors between vehicles and between biological agents have been reported. This study aimed at estimating the mean protection efficiency of the vehicle cab environment against bioaerosols with higher precision. In-cab measurement results were also analysed to ascertain whether or not these protection systems reduce workers' exposure to tolerable levels. Five front-end loaders, one mobile mixer and two agricultural tractors pulling windrow turners were investigated. Four vehicles were fitted with a pressurisation and high efficiency particulate air (HEPA) filtration system. The four others were only equipped with pleated paper filter without pressurisation. Bacteria, fungi and endotoxins were measured in 72 pairs of air samples, simultaneously collected inside the cab and on the outside of the cab with a CIP 10-M sampler. A front-end loader, purchased a few weeks previously, fitted with a pressurisation and high efficiency particulate air (HEPA) filtration system, and with a clean cab, exhibited a mean protection efficiency of between 99.47% CI 95% [98.58-99.97%] and 99.91% [99.78-99.98%] depending on the biological agent. It is likely that the lower protection efficiency demonstrated in other vehicles was caused by penetration through the only moderately efficient filters, by the absence of pressurisation, by leakage in the filter-sealing system, and by re-suspension of particles which accumulated in dirty cabs. Mean protection efficiency in regards to bacteria and endotoxins ranged between 92.64% [81.87-97.89%] and 98.61% [97.41-99.38%], and between 92.68% [88.11-96.08%] and 98.43% [97.44-99.22%], respectively. The mean protection efficiency was the lowest when confronted with fungal spores, from 59.76% [4.19-90.75%] to 94.71% [91.07-97.37%]. The probability that in-cab exposure to fungi exceeded the benchmark value for short-term respiratory effects suggests that front-end loaders and mobile mixers in composting facilities should be fitted with a pressurisation and HEPA filtration system, regardless of whether or not the facility is indoors or outdoors. Regarding the tractors, exposure inside the cabs was not significantly reduced. However, in this study, there was a less than 0.01% risk of exceeding the bench mark value associated with fungi related short-term respiratory effects during an 1-h per day windrow turning operation. Pressurisation and a HEPA filtration system can provide safe working conditions inside loaders and mobile mixer with regard to airborne bacteria, fungi and endotoxins in composting facilities. However, regular thorough cleaning of the vehicle cab, as well as overalls and shoes cleaning, and mitigation of leakage in the filter-sealing system are necessary to achieve high levels of protection efficiency.     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile-immobile-zone model.

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile-immobile-zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51-60% of the average finger diameters.     

STOCHASTIC WATER QUALITY ANALYSIS USING RELIABILITY METHOD1

ABSTRACT: This study developed a QUAL2E‐Reliability Analysis (QUAL2E‐RA) model for the stochastic water quality analysis of the downstream reach of the main Han River in Korea. The proposed model is based on the QUAL2E model and incorporates the Advanced First‐Order Second‐Moment (AFOSM) and Mean‐Value First‐Order Second‐Moment (MFOSM) methods. After the hydraulic characteristics from standard step method are identified, the optimal reaction coefficients are then estimated using the Broyden‐Fletcher‐Goldfarb‐Shanno (BFGS) method. Considering variations in river discharges, pollutant loads from tributaries, and reaction coefficients, the violation probabilities of existing water quality standards at several locations in the river were computed from the AFOSM and MFOSM methods, and the results were compared with those from the Monte Carlo method. The statistics of the three uncertainty analysis methods show that the outputs from the AFOSM and MFOSM methods are similar to those from the Monte Carlo method. From a practical model selection perspective, the MFOSM method is more attractive in terms of its computational simplicity and execution time.     

Distribution and hydrodynamic model of the Keumdong oil spill in Kwangyang Bay, Korea

Oil concentrations in the seawater, seabed sediments, and shoreline sediments were measured from the samples collected 165 days after the Keumdong oil spill accident, which had occurred in Kwangyang Bay of the South Sea, Korea in September 1993. Distribution patterns of the concentrations in the seabed and shoreline sediments have allowed us to hindcast the transport and fate of the spilled oil. Overall, the patterns agree better with the southward (seaward) surface water circulation than with the northward (landward) bottom water circulation over the region. Rapid, initial dispersal of the spilled oil to the south and its subsequent grounding onto the intertidal seabed sediments, as well as onto the shorelines, appear to have made ineffective the subsurface oil transport by the bottom current.     

OPTIMIZATION OF INTERMITTENT PUMPING SCHEDULES FOR AQUIFER REMEDIATION USING A GENETIC ALGORITHM1

ABSTRACT: Using a genetic algorithm (GA), optimal intermittent pumping schedules were established to simulate pump‐and‐treat remediation of a contaminated aquifer with known hydraulic limitations and a water miscible contaminant, located within the Duke Forest in Durham, North Carolina. The objectives of the optimization model were to minimize total costs, minimize health risks, and maximize the amount of contaminant removed from the aquifer. Stochastic ground water and contaminant transport models were required to provide estimates of contaminant concentrations at pumping wells. Optimization model simulations defined a tradeoff curve between the pumping cost and the amount of contaminant extracted from the aquifer. For this specific aquifer/miscible contaminant combination, the model simulations indicated that pump‐and‐treat remediation using intermittent pumping schedules for each pumping well produced significant reductions in predicted contaminant concentrations and associated health risks at a reasonable cost, after a remediation time of two years.     

环境微塑料与有机污染物的相互作用及联合毒性效应研究进展

环境微塑料可吸附有机污染物,并与有机污染物进行相互作用从而改变其毒性效应,增加微塑料的治理难度.本文就全球范围内微塑料与有机污染物的相互作用及毒性效应的研究进展进行综述,分析不同介质中微塑料与有机污染物的共存水平、吸附机理、影响因素以及联合毒性效应等.研究表明,微塑料可作为多环芳烃(PAHs)、多氯联苯(PCBs)、六...     

Environmental behaviour of a construction made of a mixture of hydraulic binders and air pollution control residues from municipal solid waste incineration Part 1. Physico-chemical characterisation and modelling of the source term

The reuse of waste materials requires the development of assessment methods for the long-term release of pollutants (source term) from wastes (or materials containing wastes) in contact with water. These methods depend on the scenario conditions: characteristics of the materials (especially physical structure and composition), contact with water. The scenario studied here is a water storage reservoir for fire fighting. The reservoir construction is made of a mixture of hydraulic binders and air pollution control (APC) residues from a municipal solid waste incinerator (MSWI). The modelling of the source term is performed in 5 steps ranging from the physico-chemical characterisation of the material to the validation of the proposed model by means of field simulation devices. This article presents the first steps of the methodology: physico-chemical characterisation of the source term, identification of the main transfer mechanisms and laboratory scale modelling of the source term. During the physico-chemical characterisation, it has been shown that the solidified waste shows a high basic capacity and that a relative decrease in pH during leaching favours retention of the main pollutants. During the first leaching sequences, the dynamic leaching tests show that the release of pollutants such as cadmium, arsenic, zinc and lead is extremely low but that the release of alkaline species (sodium and potassium) and chloride is very high from the beginning, whereas the release of calcium remains very high even after 3600 h of leaching. Identification of the main transfer mechanisms concludes that the release of soluble pollutants is the combined result of diffusional transfer of pollutants in the solution and the physico-chemical specificity of the species. The modelling based on these features enables a good simulation of the release but reveals a deviation from the experimental results after 500 h for alkaline species and 1000 h for Ca and Cl leaching. However, this deviation only appears after release of the major part of these elements.     

化学工程固沙在塔里木沙漠公路沙害防治中的适宜性

由于天然材料日益紧缺 ,研制适宜于流动性沙漠地区公路沙害防治的人工替代材料势在必行 .结合塔里木沙漠公路沙害环境 ,实验室优选出 L VA、LVP、WBS和 STB 4种抗性较好的固沙剂 ,对其理化性能、粘结体力学性能和抗风蚀性能等测试结果表明 :颗粒粒径 0.2μm～ 0.5μm,粘度 12 Pa·s～ 15Pa·s;10℃～70℃温度下无沉淀 ,不燃烧 ;实验抗压强度 1.0 MPa～12.1 MPa;10℃～-20℃低温下重量损失率 0%～ 1.8%;紫外光照射 300h强度损失率 0%～ 42%;在 5m·s^-1～253m·s^-1实验风速下 ,风蚀量 0g·(106cm²·h)^-1～4.0 g·(106cm²·h)^-1 ;现场试验固结层厚度 0.2 mm～0.5mm,强度高 .化学工程固沙技术适宜于塔里木沙漠公路沙害防治 .