Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

Natural biodegradation of wood preservatives

Natural biodegradation can contain groundwaters impacted by creosote and pentachlorophenol. Using natural biodegradation for such sites is attractive because groundwater restoration is often impracticable, but the dissolved plumes are biodegradable and exert relatively low oxygen demands. Three case studies of its successful use are presented, with emphasis on the types of evidence needed, the rates and extents of removal, and the strategies for incorporating natural biodegradation into a remediation approach. Natural biodegradation was proven at all three sites, using a combination of field geochemical measurements, laboratory simulations, and computer modeling. Contaminant plumes at these three sites were contained within 100 to 700 feet downgradient of the apparent sources, although the rates of biodegradation varied widely. Natural biodegradation should be considered as part of an overall remedial strategy for most sites contaminated by creosote and/or pentachlorophenol.     

Electromagnetic fields in offices.

With the increased use of electric and electronic equipment in our offices, our daily exposure to electromagnetic fields has become increasingly complex due to the great variety of the frequency content of the fields. Today focus has shifted from monitors as the dominating sources of electromagnetic fields to other electronic equipment, cabling, nearby substations, power lines and stray currents in buildings. In the last 5 years wireless communication has become common in our offices. These devices use radio frequency waves to communicate and are therefore sources of radio frequency fields in our offices. To a certain degree, they all add to the complicated issue of the extensive field frequencies found in offices. The exposure of office workers is generally considered to be low and not in conflict with the existing guidelines, but if a precaution approach is applied there are a number of measures that can be taken to reduce the electromagnetic fields in offices in order to obtain a good electrical environment.     

Exploiting Abstract Possibilities: A Critique of the Concept and Practice of Product Patenting

Developments in biotechnology and genomics have moved the issue of patenting scientific and technological inventions toward the center of interest. In particular, the patentability of genes of plants, animals, or humans and of genetically modified (parts of) living organisms has been discussed, and questioned, from various normative perspectives. This paper aims to contribute to this debate. For this purpose, it first explains a number of relevant aspects of the theory and practice of patenting. The focus is on a special and increasingly significant type of patents, namely product patents. The paper provides three general arguments against the concept and practice of product patenting. The first argument briefly considers the claim that patents are legitimate because they promote socially useful innovation. Against this claim, it is argued that product patents may hamper rather than promote such innovation. The second and main argument concludes that product patents are not adequately based on actual technological inventions, as they should be according to the usual criteria of patentability. The principal moral issue is that product patents tend to reward patentees for inventions they have not really made available. The final argument proposes a method for patenting the heat of the sun. Assuming that granting this patent will be generally considered absurd, the argument exposes a further, fundamental problem of the concept and practice of product patenting.     

Leachability testing of metallic wastes.

The performance of two tests, a batch test and a percolation test for the characterization of waste as suggested in the EU council decision 2003/33/EC was investigated. The tests were carried out on two solid waste streams from a metal recycling industry. The concentrations of heavy metals such as Cu, Zn and Pb were more than one order of magnitude lower than the proposed limit values. Generally, batch test values were equal or higher than percolation test values. With the proposed test procedures both materials could be considered as non-dangerous wastes. The test performance was also investigated using a leachant with higher ionic strength instead of demineralized water as prescribed. The results clearly show a significant increase in the concentration of some heavy metals. Total concentrations of phenolic compounds and polychlorinated biphenyls were less than 1 p.p.m. and 2 p.p.b., respectively. The precision of the batch and the percolation tests were on average 48 and 35%, respectively.     

The effect of an ergonomic intervention on musculoskeletal, psychosocial, and visual strain of VDT data entry work: the Polish part of the international study.

A group of routine data entry operators (female) was included in the Polish MEPS (musculoskeletal--eyestrain--psychosocial--stress) study. Before the intervention, ergonomic assessment revealed improper working conditions such as inadequate lighting, uncomfortable chairs, and lack of forearm and wrist support while medical examination revealed that trapezius muscle load along with upper arm, head and back angles were higher than advisable. Subjects complained about neck and shoulder pain, visual problems, and psychosocial conditions. The ergonomic intervention included installation of new luminaires and Venetian blinds, new chairs, repair of ventilators, and optometric corrections. The results after the intervention showed mainly improvement in chair comfort, lighting conditions, visual strain, and sitting posture. However, financial limitations did not allow satisfactory completion of the intervention leading to a mixed interpretation of the results.     

A cross-country comparison of short- and long-term effects of an ergonomic intervention on musculoskeletal discomfort, eyestrain and psychosocial stress in VDT operators: selected aspects of the international project.

Three groups of data entry female visual display terminal (VDT) workers from Norway (n = 30), Poland (n = 33) and the USA (n = 29) were compared. Before intervention, the Norwegian group reported more neck pain compared with the Polish group. The Polish group reported less shoulder pain than both the U.S. and the Norwegian groups. The clinical examination documented fewer symptoms and signs of musculoskeletal illness among the Polish participants compared with the Norwegian and the U.S. groups. After intervention, the Norwegian group reported a reduction in neck pain while the U.S. group reported a reduction in shoulder pain. The Polish group reported an increase in neck, shoulder and forearm pain at follow-up compared to after intervention. The Polish group recorded higher flexion of the upper arm at follow-up parallel with an increase of pain in the upper part of the body. Visual discomfort showed variable results in the 3 countries.