There Are More Than Three Reasons to Consider Sustainable Remediation,a Dutch Perspective

This article provides an overview of the developments concerning sustainable remediation (SR) from the authors’ perspective. A short history of policy development is outlined, in which the focus mainly lies on the Netherlands since this is the homeland of the majority of the authors. The Netherlands is a densely populated country with high pressure on land and was in the forefront of developments in soil policy. The authors plead for simplicity in approaches, as history has proven that the simpler theory more often is true, and above all will better be understood by stakeholders and, thus, will more easily lead to consensus. Implicitly the authors make clear that SR not only has benefits from a societal, economic, and environmental point of view, but if the methodologies are implemented correctly, it leads to more robust and supported decision making. Moreover, it opens the road to flexible and integral remedial objectives that enable innovative and creative solutions for soil and groundwater contamination. The proposed methodologies and creative innovations are illustrated with full‐scale operational cases. ©2017 Wiley Periodicals, Inc.     

Influence of photolysis on multispectral photoacoustic measurement of nitrogen dioxide concentration

Multispectral photoacoustic instruments are commonly used to measure aerosol and nitrogen dioxide (NO₂) light absorption coefficients to determine the radiation budget of the atmosphere. Here a new photoacoustic system is developed to explore the effect of photolysis on the measured signal in a multispectral photoacoustic spectrometer. In this system, a 405-nm laser is used primarily as light source for photolysis. Additionally, a well-overlapped 532-nm laser, modulated at the resonant frequency of the photoacoustic instrument, is used to probe the NO₂ concentration. As a result, the photolysis effect at 405 nm can be observed by the photoacoustic instrument through the 532-nm laser. This work determines an 11% reduction of the photoacoustic signal caused by the photolysis effect for typical conditions, which needs to be taken into account when calibrating multispectral photoacoustic spectrometers with NO₂.

Implications: Multispectral photoacoustic instruments are commonly used to measure aerosol and nitrogen dioxide (NO₂) light absorption coefficients to determine the radiation budget of the atmosphere. A 405-nm laser is often used in these multispectral photoacoustic instruments. Although NO₂ absorbs strongly at 405 nm, it also has a strong photolysis pathway that is accessible by light of the same wavelength. Photolysis reduces the photoacoustic signal, necessitating special care when interpreting photoacoustic measurements. This paper offers a method for the multispectral photoacoustic instrument user to quantify the influence of the 405-nm NO₂ photolysis effect on the photoacoustic signal.     

Evaluating the effect of flood damage-reducing measures: a case study of the unembanked area of Rotterdam,the Netherlands

Empirical evidence of increasing flood damages and the prospect of climatic change has initiated discussions in the flood management community on how to effectively manage flood risks. In the Netherlands, the framework of multi-layer safety (MLS) has been introduced to support this risk-based approach. The MLS framework consists of three layers: (i) prevention, (ii) spatial planning and (iii) evacuation. This paper presents a methodology to evaluate measures in the second layer, such as wet proofing, dry proofing or elevating buildings. The methodology uses detailed land-use data for the area around the city of Rotterdam (up to building level) that has recently become available. The vulnerability of these detailed land-use classes to flooding is assessed using the stage–damage curves from different international models. The methodology is demonstrated using a case study in the unembanked area of Rotterdam in the Netherlands, as measures from the second layer may be particularly effective there. The results show that the flood risk in the region is considerable: EUR 36 million p.a. A large part (almost 60 %) of this risk results from industrial land use, emphasising the need to give this category more attention in flood risk assessments. It was found that building level measures could substantially reduce flood risks in the region because of the relatively low inundation levels of buildings. Risk to residential buildings would be reduced by 40 % if all buildings would be wet-proofed, by 89 % if all buildings would be dry-proofed and elevating buildings over 100 cm would render the risk almost zero. While climate change could double the risk in 2100, such building level measures could easily nullify this effect. Despite the high potential of such measures, actual implementation is still limited. This is partly caused by the lack of knowledge regarding these measures by most Dutch companies and the legal impossibility for municipalities to enforce most of these measures as they would go beyond the building codes established at the national level.     

A probabilistic model for the carry-over of PCDD/Fs from feed to growing pigs

When food producing animals are contaminated with PCDD/F congeners, information on the contaminant’s concentration in the bodies of the animals at time of slaughter is needed for risk management purposes. We have developed a mathematical model for the kinetics of PCDD/Fs in growing pigs in case of contaminated feed fed for a limited duration of time. This model allows the prediction of concentrations in body fat. It considers absorption fractions of PCDD/Fs, clearance by metabolism, dilution by growth and excretion through fecal fat. The model parameters were calibrated by fitting the model to experimental data. On the basis of this toxicokinetic model a probabilistic model has been constructed. The probabilistic model handles the parameters with appropriate probability distributions and Monte-Carlo simulation technique, providing for realistic situations with many animals and a range of contaminations and feeding intervals. We applied the new model to describe the German dioxin incident of winter 2010/2011 and discuss its viability as decision tool. The approach demonstrated here is a showcase how a risk assessment in the case of contaminated feeding can be performed.     

Dioxin/POPs legacy of pesticide production in Hamburg: Part 1—securing of the production area

α-Hexachlorocyclohexane (HCH), β-HCH, and γ-HCH (lindane) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention. Therefore, the chemicals need to be globally addressed, including the disposal of historic wastes. At most sites, the approximately 85 % of HCH waste isomers were dumped. At a former lindane factory in Hamburg and some other factories the HCH, waste was recycled producing residues with high polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) levels. The soil and ground water under the former pesticide factory was/is highly contaminated with HCH (260 tons), chlorobenzenes (550 tons), and PCDD/PCDF (6 kg toxic equivalents (TEQ)). This contamination did not result from disposal operations but from spillages and leakages during the 30 years of the factory's production history. A containment wall has been constructed around the production area to prevent the dispersal of the pollutants. The ground water is managed by a pump and treat system. Over the last 15 years, approximately 10–30 tons of this pollution reservoir has been pumped and incinerated. For the contaminated production buildings, specific assessment and demolition technologies have been applied. In addition to their HCH waste isomer deposition, former lindane/HCH productions need to be assessed for possible recycling practice of HCH and related PCDD/PCDF contamination of the production area and buildings. Since such recycling activities have taken place at several factories in different countries, the experience of assessment and management of the described production area and contaminated buildings could be valuable. Such assessment could be addressed within the frame of the Stockholm Convention.     

Occurrence and behavior of emerging contaminants in surface water and a restored wetland

Pollution mitigation is an important target for restored wetlands, and although there is much information in relation to nutrient removal, little attention has been paid to emerging contaminants. This paper reports on the occurrence and attenuation capacity of 17 emerging contaminants in a restored wetland and two rivers in North-East Denmark. The compounds belong to the groups of pharmaceuticals, fragrances, antiseptics, fire retardants, pesticides, and plasticizers. Concentrations in surface waters ranged from 2 to 1476 ng L⁻¹. The compounds with the highest concentrations were diclofenac, 2-methyl-4-chlorophenoxyacetic acid (MCPA), caffeine, and tris(2-chloroethyl) phosphate (TCEP). The herbicide concentrations increased after a rain-fall event, demonstrating the agricultural run-off origin of these compounds, whereas the concentration of the other emerging contaminants was rather conservative. The mitigation capacity of the restored wetland for the compounds ranged from no attenuation to 84% attenuation (19% on average). Hence, restored wetlands may be considered as a feasible alternative for mitigating emerging contaminants from river waters.     

Comparison of the release of constituents from granular materials under batch and column testing

Column leaching testing can be considered a better basis for assessing field impact data than any other available batch test method and thus provides a fundamental basis from which to estimate constituent release under a variety of field conditions. However, column testing is time-intensive compared to the more simplified batch testing, and may not always be a viable option when making decisions for material reuse. Batch tests are used most frequently as a simple tool for compliance or quality control reasons. Therefore, it is important to compare the release that occurs under batch and column testing, and establish conservative interpretation protocols for extrapolation from batch data when column data are not available. Five different materials (concrete, construction debris, aluminum recycling residue, coal fly ash and bottom ash) were evaluated via batch and column testing, including different column flow regimes (continuously saturated and intermittent unsaturated flow). Constituent release data from batch and column tests were compared. Results showed no significant difference between the column flow regimes when constituent release data from batch and column tests were compared. In most cases batch and column testing agreed when presented in the form of cumulative release. For arsenic in carbonated materials, however, batch testing underestimates the column constituent release for most LS ratios and also on a cumulative basis. For cases when As is a constituent of concern, column testing may be required.     

Beurteilung von Gefahren aus militärischen Altlasten in Einzugsgebieten von Trinkwassergewinnungsanlagen auf der Basis eines Kriterienkataloges

To include consequences emanating from former military sites on the drinking water supply, a catalog of criteria has been developed which permits the determination and assessment of the hazards in general and their impact on human health in particular. The assessment criteria correspond to the special requirements and standards for drinking water hygiene and protection in Germany. The criterion catalog is a completion module to the usual praxis and existing conceptions, and has proved its practical value in the initial assessment of military sites in the new federal states of Germany. The scheme is a control instrument suitable for obtaining an assessment concerning the extent to which drinking-water resources are and will be affected by former waste disposal and other contaminated sites at the present and in the future.     

Prediction of stream fish assemblages from land use characteristics: implications for cost-effective design of monitoring programmes

Increasing human impact on stream ecosystems has resulted in a growing need for tools helping managers to develop conservations strategies, and environmental monitoring is crucial for this development. This paper describes the development of models predicting the presence of fish assemblages in lowland streams using solely cost-effective GIS-derived land use variables. Three hundred thirty-five stream sites were separated into two groups based on size. Within each group, fish abundance data and cluster analysis were used to determine the composition of fish assemblages. The occurrence of assemblages was predicted using a dataset containing land use variables at three spatial scales (50 m riparian corridor, 500 m riparian corridor and the entire catchment) supplemented by a dataset on in-stream variables. The overall classification success varied between 66.1–81.1% and was only marginally better when using in-stream variables than when applying only GIS variables. Also, the prediction power of a model combining GIS and in-stream variables was only slightly better than prediction based solely on GIS variables. The possibility of obtaining precise predictions without using costly in-stream variables offers great potential in the design of monitoring programmes as the distribution of monitoring sites along a gradient in ecological quality can be done at a low cost.     

Status and trends in Arctic vegetation: Evidence from experimental warming and long-term monitoring

Changes in Arctic vegetation can have important implications for trophic interactions and ecosystem functioning leading to climate feedbacks. Plot-based vegetation surveys provide detailed insight into vegetation changes at sites around the Arctic and improve our ability to predict the impacts of environmental change on tundra ecosystems. Here, we review studies of changes in plant community composition and phenology from both long-term monitoring and warming experiments in Arctic environments. We find that Arctic plant communities and species are generally sensitive to warming, but trends over a period of time are heterogeneous and complex and do not always mirror expectations based on responses to experimental manipulations. Our findings highlight the need for more geographically widespread, integrated, and comprehensive monitoring efforts that can better resolve the interacting effects of warming and other local and regional ecological factors.