How to assess exposure of aquatic organisms to manufactured nanoparticles?

Ecological risk of chemicals is measured by the quotient of predicted no-effect concentrations and predicted exposure concentrations, which are hard to assess for manufactured nanomaterials (NMs). This paper proposes modifications to currently used models, in order to make them suitable for estimating exposure concentrations of NMs in the aquatic environment. We have evaluated the adequacy of the current guidance documents for use with NMs and conclude that nano-specific fate processes, such as sedimentation and dissolution need to be incorporated. We have reviewed the literature on sedimentation and dissolution of NMs in environmentally relevant systems. We deduce that the overall kinetics of water-sediment transport of NMs should be close to first order. The lack of data on dissolution of NMs under environmentally realistic conditions calls for a pragmatic decision on which rates to be used in modeling. We find that first order removal kinetics for dissolution seems adequate. Based on limited data from literature, probable removal rates range from 0 to 10(-4)s(-1) for sedimentation, and from 0 to 10(-5)s(-1) for dissolution. Further experimental data at environmentally relevant conditions for sedimentation and dissolution of NMs is needed.     

Spatiotemporal variability in surface energy balance across tundra,snow and ice in Greenland

The surface energy balance (SEB) is essential for understanding the coupled cryosphere–atmosphere system in the Arctic. In this study, we investigate the spatiotemporal variability in SEB across tundra, snow and ice. During the snow-free period, the main energy sink for ice sites is surface melt. For tundra, energy is used for sensible and latent heat flux and soil heat flux leading to permafrost thaw. Longer snow-free period increases melting of the Greenland Ice Sheet and glaciers and may promote tundra permafrost thaw. During winter, clouds have a warming effect across surface types whereas during summer clouds have a cooling effect over tundra and a warming effect over ice, reflecting the spatial variation in albedo. The complex interactions between factors affecting SEB across surface types remain a challenge for understanding current and future conditions. Extended monitoring activities coupled with modelling efforts are essential for assessing the impact of warming in the Arctic.     

Prediction of odor from pig production based on chemical odorants

The present work was performed to investigate the use of odorant measurements for prediction of odor concentration in facilities with growing-finishing pigs and to analyze the odorant composition in facilities with different floor and ventilation systems. Air was sampled in Nalophan bags, odor concentrations were measured by dilution-to-threshold olfactometry, and concentrations of odorants were measured by proton-transfer-reaction mass spectrometry (PTR-MS). Olfactometry and chemical analyses were synchronized to take place at identical time intervals after sampling. A principal component analysis revealed that different facilities for growing-finishing pigs can be distinguished based on the odorants. Pit ventilation comprising a small amount of the total ventilation air (10-20%) in facilities with both room and pit ventilation can be used to concentrate odorants, whereas the room ventilation contains lower concentrations of most odorants. A partial least squares regression model demonstrated that prediction of the odor concentration based on odorants measured by PTR-MS is feasible. Hydrogen sulfide, methanethiol, trimethylamine, and 4-methylphenol were identified as the compounds having the largest influence on the prediction of odor concentration, whereas carboxylic acids had no significant influence. In conclusion, chemical measurement of odorants by PTR-MS is an alternative for expressing the odor concentration in facilities with growing-finishing pigs that can be used to increase the understanding of odor from different types of facilities and improve the development of odor reduction technologies.     

The Significance of the North Water Polynya to Arctic Top Predators

The North Water polynya (~76°N to 79°N and 70°W to 80°W) is known to be an important habitat for several species of marine mammals and sea birds. For millennia, it has provided the basis for subsistence hunting and human presence in the northernmost part of Baffin Bay. The abundance of air-breathing top predators also represents a potential source of nutrient cycling that maintains primary production. In this study, aerial surveys conducted in 2009 and 2010 were used for the first time to map the distribution and estimate the abundance of top predators during spring in the North Water. Belugas (Delphinapterus leucas) were not detected north of 77°20′N but were found along the coast of West Greenland and offshore in the middle of the North Water with an abundance estimated at 2245 (95 % CI 1811–2783). Narwhals (Monodon monoceros) were widely distributed on the eastern side of the North Water with an estimate of abundance of 7726 (3761–15 870). Walruses (Odobenus rosmarus) were found across the North Water over both shallow and deep (>500 m) water with an estimated abundance of 1499 (1077–2087). Bearded (Erignathus barbatus) and ringed seals (Phoca hispida) used the large floes of ice in the southeastern part of the North Water for hauling out. Most polar bears (Ursus maritimus) were detected in the southern part of the polynya. The abundances of bearded and ringed seals were 6016 (3322–10 893) and 9529 (5460–16 632), respectively, and that of polar bears was 60 (12–292). Three sea bird species were distributed along the Greenland coast (eiders, Somateria spp.), in leads and cracks close to the Greenland coast (little auks, Alle alle) or widely in open water (thick-billed guillemots, Uria lomvia).     

Chemical and microbial characteristics of municipal drinking water supply systems in the Canadian Arctic

Drinking water in the vast Arctic Canadian territory of Nunavut is sourced from surface water lakes or rivers and transferred to man-made or natural reservoirs. The raw water is at a minimum treated by chlorination and distributed to customers either by trucks delivering to a water storage tank inside buildings or through a piped distribution system. The objective of this study was to characterize the chemical and microbial drinking water quality from source to tap in three hamlets (Coral Harbour, Pond Inlet and Pangnirtung—each has a population of <2000) on trucked service, and in Iqaluit (population ~6700), which uses a combination of trucked and piped water conveyance. Generally, the source and drinking water was of satisfactory microbial quality, containing Escherichia coli levels of <1 MPN/100 mL with a few exceptions, and selected pathogenic bacteria and parasites were below detection limits using quantitative polymerase chain reaction (qPCR) methods. Tap water in households receiving trucked water contained less than the recommended 0.2 mg/L of free chlorine, while piped drinking water in Iqaluit complied with Health Canada guidelines for residual chlorine (i.e. >0.2 mg/L free chlorine). Some buildings in the four communities contained manganese (Mn), copper (Cu), iron (Fe) and/or lead (Pb) concentrations above Health Canada guideline values for the aesthetic (Mn, Cu and Fe) and health (Pb) objectives. Corrosion of components of the drinking water distribution system (household storage tanks, premise plumbing) could be contributing to Pb, Cu and Fe levels, as the source water in three of the four communities had low alkalinity. The results point to the need for robust disinfection, which may include secondary disinfection or point-of-use disinfection, to prevent microbial risks in drinking water tanks in buildings and ultimately at the tap.     

Importance of food quantity to structural growth rate and neutral lipid reserves accumulated in Calanus finmarchicus

 Growth and developmental rates were determined for copepodids of Calanus finmarchicus (Gunnerus) from experimental seawater mesocosms in a western Norwegian fjord. The instantaneous growth rates (g) from copepodid stage I (CI) to adult ranged from 0.08 to 0.10 d⁻¹. Daily per capita mortality rate of the cohorts was as low as 0.012 d⁻¹ (1.2% d⁻¹). At local increasing temperatures (5.1 to 8.3 °C), development was equiproportional, and the cumulative median development time from egg to CV was approximately 65 d. CV moulted to males and females, and egg production was initiated. Enhancement of food resources by nutrient addition caused a 23.4% increase in growth rates from CI to adult. Additionally, copepodid stages showed a generally larger body size, carbon and nitrogen content and total storage lipid content (wax esters + triacylglycerols) in response to enhanced resources. Our data support an elsewhere proposed exponential-growth hypothesis; growth of the structural compartments and store lipids (mostly wax esters) was exponential during the copepodid stages. However, a sigmoidal pattern of growth best described growth of adult stages if reared at high resources, and depot lipid accumulation in late CVs and adults at high resources. Body nitrogen growth increased exponentially, however, no significant changes in nitrogen specific growth rates were found between individuals from low and high resources. CV and adults seem to have reached near-maximal weights at high resources, whereas structural weight continued to increase at low resources. Despite the differences in structural growth dynamics, cohort development was similar until the end of CV. During the onset of sexual differentiation, the male:female ratio and the adult:CV ratio were highest at high food resources, suggesting that the time used for the final moult depends on the feeding history of the copepods in relation to food quality and quantity. It appears that relatively small changes in food availability strongly influence the biochemical composition of C. finmarchicus copepodids. Received: 28 May 1999 / Accepted: 10 February 2000     

Application of a three-tier framework to assess ecological condition of Gulf of Mexico coastal wetlands

A multi-level coastal wetland assessment strategy was applied to wetlands in the northern Gulf of Mexico (GOM) to evaluate the feasibility of this approach for a broad national scale wetland condition assessment (US Environmental Protection Agency’s National Wetlands Condition Assessment). Landscape-scale assessment indicators (tier 1) were developed and applied at the sub-watershed (12-digit hydrologic unit code (HUC)) level within the GOM coastal wetland sample frame with scores calculated using land-use maps and geographic information system. Rapid assessment protocols (tier 2), using a combination of data analysis and field work, evaluated metrics associated with landscape context, hydrology, physical structure, and biological structure. Intensive site monitoring (tier 3) included measures of soil chemistry and composition, water column and pore-water chemistry, and dominant macrophyte community composition and tissue chemistry. Relationships within and among assessment levels were evaluated using multivariate analyses with few significant correlations found. More detailed measures of hydrology, soils, and macrophyte species composition from sites across a known condition gradient, in conjunction with validation of standardized rapid assessment method, may be necessary to fully characterize coastal wetlands across the region.     

Validation of FLACS against experimental data sets from the model evaluation database for LNG vapor dispersion

The siting of facilities handling liquefied natural gas (LNG), whether for liquefaction, storage or regasification purposes, requires the hazards from potential releases to be evaluated. One of the consequences of an LNG release is the creation of a flammable vapor cloud, that may be pushed beyond the facility boundaries by the wind and thus present a hazard to the public. Therefore, numerical models are required to determine the footprint that may be covered by a flammable vapor cloud as a result of an LNG release. Several new models have been used in recent years for this type of simulations. This prompted the development of the “Model evaluation protocol for LNG vapor dispersion models” (MEP): a procedure aimed at evaluating quantitatively the ability of a model to accurately predict the dispersion of an LNG vapor cloud.This paper summarizes the MEP requirements and presents the results obtained from the application of the MEP to a computational fluid dynamics (CFD) model – FLACS. The entire set of 33 experiments included in the model validation database were simulated using FLACS. The simulation results are reported and compared with the experimental data. A set of statistical performance measures are calculated based on the FLACS simulation results and compared with the acceptability criteria established in the MEP. The results of the evaluation demonstrate that FLACS can be considered a suitable model to accurately simulate the dispersion of vapor from an LNG release.