Identification of heavy metal pollutants using multivariate analysis and effects of land uses on their accumulation in urban soils in Beijing, China

In order to evaluate the current state of the environmental quality of soils in Beijing, we investigated contents of 14 metals in Beijing urban soils inside the 5th ring road by even grids sampling. Statistic analyses were conducted to identify possible heavy metal pollutants, as well as the effects of land uses on their accumulation. Our results revealed that the urban soils in Beijing were contaminated by Cd, Pb, Cu, and Zn. Land uses and urbanization ages affected the accumulation of the four heavy metals in soils significantly. Soils in industrial areas have the highest average Cu and Zn contents, while Pb contents in park areas and Cd in agricultural areas are the highest. The accumulations of Pb and Zn in urban soils increase significantly with sampling plots approaching the city center. And Pb, Cd, and Zn contents in soils in traffic areas also tend to increase in the city center. However, residential areas have the lowest contents of all the four heavy metals.     

Estimation of phosphorus flux in rivers during flooding

Reservoirs in Taiwan are inundated with nutrients that result in algal growth, and thus also reservoir eutrophication. Controlling the phosphorus load has always been the most crucial issue for maintaining reservoir water quality. Numerous agricultural activities, especially the production of tea in riparian areas, are conducted in watersheds in Taiwan. Nutrients from such activities, including phosphorus, are typically flushed into rivers during flooding, when over 90 % of the yearly total amount of phosphorous enters reservoirs. Excessive or enhanced soil erosion from rainstorms can dramatically increase the river sediment load and the amount of particulate phosphorus flushed into rivers. When flow rates are high, particulate phosphorus is the dominant form of phosphorus, but sediment and discharge measurements are difficult during flooding, which makes estimating phosphorus flux in rivers difficult. This study determines total amounts of phosphorus transport by measuring flood discharge and phosphorous levels during flooding. Changes in particulate phosphorus, dissolved phosphorus, and their adsorption behavior during a 24-h period are analyzed owing to the fact that the time for particulate phosphorus adsorption and desorption approaching equilibrium is about 16 h. Erosion of the reservoir watershed was caused by adsorption and desorption of suspended solids in the river, a process which can be summarily described using the Lagmuir isotherm. A method for estimating the phosphorus flux in the Daiyujay Creek during Typhoon Bilis in 2006 is presented in this study. Both sediment and phosphorus are affected by the drastic discharge during flooding. Water quality data were collected during two flood events, flood in June 9, 2006 and Typhoon Bilis, to show the concentrations of suspended solids and total phosphorus during floods are much higher than normal stages. Therefore, the drastic changes of total phosphorus, particulate phosphorus, and dissolved phosphorus in rivers during flooding should be monitored to evaluate the loading of phosphorus more precisely. The results show that monitoring and controlling phosphorus transport during flooding can help prevent the eutrophication of a reservoir.     

Factor analysis of H2S emission at a wastewater lift station: a case study

Odor and corrosion are common problems in domestic wastewater collection, transportation, pumping, and treatment processes. Based on the comparison among odorous compounds and onsite observations at a wastewater lift station, H₂S is more likely to have caused the odor and corrosion problems than methanethiol and other organic sulfides. The field data from both air and wastewater quality monitoring demonstrated that more H₂S (1 ppmv) was formed at a more negative redox potential, lower pH, and a higher temperature of wastewater. Since the lower detection level of most current analytical techniques is much greater than human’s smell and the reference concentration for adverse health effects, automatic monitoring on the threshold of H₂S formation provides a mechanism to trigger control techniques only when necessary for cost saving purposes. Based on Gibbs free energy, a more negative redox potential is required to form H₂S with an increase in pH and a decrease in temperature and SO ₄ ^2? concentration. However, pH effect is more significant than both temperature and SO ₄ ^2? concentration for H₂S formation. It is recommended that H₂S control techniques be started when the redox potential is below ?44 mV, the pH is lower than 5.6, and the temperature is higher than 11.5 °C to control H₂S below the reference concentration. Corroded concrete particles were examined by X-ray diffraction, which showed that the dominant crystal form was quartz.     

Land use change and landslide characteristics analysis for community-based disaster mitigation

On August 8, 2009, Typhoon Morakot brought heavy rain to Taiwan, causing numerous landslides and debris flows in the Taihe village area of Meishan Township, Chiayi County, in south-central Taiwan. In the Taihe land is primary used for agriculture and land use management may be a factor in the area’s landslides. This study explores Typhoon Morakot-induced landslides and land use changes between 1999 and 2009 using GIS with the aid of field investigation. Spot 5 satellite images with a resolution of 2.5 m are used for landslide interpretation and manually digitalized in GIS. A statistical analysis for landslide frequency–area distribution was used to identify the landslide characteristics associated with different types of land use. There were 243 landslides with a total area of 2.75 km² in the study area. The area is located in intrinsically fragile combinations of sandstone and shale. Typhoon Morakot-induced landslides show a power–law distribution in the study area. Landslides were mainly located in steep slope areas containing natural forest and in areas planted with bamboo, tea, and betel nut. Land covered with natural forest shows the highest landslide ratio, followed by bamboo, betel nut, and tea. Landslides thus show a higher ratio in areas planted with shallow root vegetation such as bamboo, betel nut, and tea. Furthermore, the degree of basin development is proportional to the landslide ratio. The results show that a change in vegetation cover results in a modified landslide area and frequency and changed land use areas have higher landslide ratios than non-changed. Land use management and community-based disaster prevention are needed in mountainous areas of Taiwan for hazard mitigation.     

Molecular detection and comparison of Acanthamoeba genotypes in different functions of watersheds in Taiwan

The protistan genus Acanthamoeba is a free-living amoeba existing in various environments. Within this protistan genus, there are some species recognized as potential human pathogens, which may cause granulomatous amoebic encephalitis, Acanthamoeba keratitis and chronic granulomatous lesions of the skin. In this study, 211 water samples were collected from two watersheds in southern Taiwan. We detected Acanthamoeba based on the PCR amplification with a genus-specific primer pair and investigation of Acanthamoeba in Puzih River and Kaoping River in southern Taiwan. Acanthamoeba species were detected in 34 (16.1%) samples. The presence or absence of Acanthamoeba within the water samples showed significant difference with the levels of water temperature and total coliforms. The most frequently identified Acanthamoeba genotype was T4 (n = 19), followed by T5 (n = 8), and then T15 (n = 3). Genotype T6, T7/T8, T11 and T12 were all detected once. Genotype T4, T5, T6, T11 and T15 of Acanthamoeba are responsible for Acanthamoeba keratitis and should be considered a potential health threat associated with human activities in environmental surface water watersheds.     

便携式分光光度计法快速测定水中砷方法研究

通过研究各仪器性能指标以及测定实际水质样品,对3种便携式分光光度计快速测定水中砷的方法进行了优化和比对研究。结果表明,ZZW-Ⅱ测试仪快速测定水中砷的方法检出限(0.2 mg/L)高于JH 916检测仪和PORS-15 V光谱仪的方法检出限(0.008和0.009 mg/L),在突发性环境污染事故应急监测中,JH 916检测仪和PORS-15 V光谱仪具有相对较高的灵敏度。ZZW-Ⅱ测试仪和JH 916检测仪快速测定水中砷的方法精密度相近,其测定结果相对标准偏差均未超过5.7%(n=6),PORS-15 V光谱仪快速测定水中砷的方法精密度稍差,其相对标准偏差最大值为17%。测定实际样品时,加标回收率分别为110%~126%(ZZW-Ⅱ测试仪),63%~108%(PORS-15 V光谱仪),78%~101%(JH 916检测仪)。3种便携式分光光度计与实验室分析方法相比,测定结果精密度均存在显著性差异,测定结果相对偏差亦较大,相对偏差最大值分别为-19.0%(ZZW-Ⅱ测试仪),17.0%(PORS-15 V光谱仪),-15.0%(JH 916检测仪)。     

全二维气相色谱-飞行时间质谱法分离复杂体系中7种指示剂 多氯联苯

采用全二维气相色谱-飞行时间质谱法(GC×GC TOF-MS)分析了混标样品Aroclor 1260、Aroclor 1254、Aroclor 1242中的多氯联苯(PCBs)单体,考察了在复杂体系下对7种PCBs指示剂的分离能力。结果表明,与优化柱系统的分离效果相比,136种单体的混标样品中共分离出121种单体,7种指示剂经一维和二维的保留时间及质谱定性,在121种单体的2D斑点图中清晰可辨。全二维对于复杂体系的PCBs和指示剂的分离表明其强大的分离能力和对于检测复杂体系中指示剂的分辨能力,对该类物质的定性和定量检测具有重要意义。     

电解铝企业阳极残渣、阳极残极浸出毒性鉴别及管理建议

对电解铝企业产生的阳极残渣、阳极残极浸出毒性进行了鉴别。鉴别结果表明：电解铝企业产生阳极残渣浸出液中氟化物（不含氟化钙）平均质量浓度为140 mg／L,最高达244 mg／L,且超标试样数达到《危险废物鉴别标准浸出毒性鉴别》中相应规定,鉴别该废物属于危险废物,应按照危险废物进行管理;阳极残极浸出液中氟化物（不含氟化钙）平均质量浓度为74 mg／L,无超标试样数,该废物不属于具有氟化物浸出毒性的固体废物,建议仍按一般固体废物进行管理。     

大数据解析技术在大气环境监测中的应用研究

针对近年来新兴的大数据及挖掘、分析技术,对大数据解析技术在环境科学研究中的应用进行了分析和探析。以城市局部地区大气细颗粒污染物PM2.5浓度计算为例,筛选了PM2.5浓度历史数据、气象条件、交通状况、人群活动情况、网格道路状况等数据为影响特征量,分析了用神经网络法进行大数据解析和推演的原理和数学过程,是用数学、计算机、统计等方法研究解决多元、非线性复杂环境问题的一种新的探索。