Metallakkumulation in Moosen: Standörtliche und regionale Randbedingungen des Biomonitoring von Luftverunreinigungen

Goal and Scope

Several studies show that the concentration of metals in mosses depends not only on metal deposition but also on factors such as moss species, canopy drip, precipitation, altitude, distance to the sea and the analytical technique used. However, contrasting results have been reported and the interpretation of the spatial variability of the metal accumulation in mosses remains difficult. In the presented study existing monitoring data from the European Heavy Metals in Mosses Surveys together with surface data on precipitation, elevation and land use are statistically analysed to assess factors other than emissions that have an influence on the metal accumulation in the mosses.

Main Features

Inference statistics and Spearman correlation analysis were applied to examine the association of the metal accumulation and the distance of the monitoring sites to the sea as well as the altitude. Whether or not significant differences of the metal loads in the mosses exist at national borders was examined with help of the U-test after Mann and Whitney. In order to identify and rank the factors that are assumed to have an influence on the metal uptake of the mosses Classification and Regression Trees (CART) were applied.

Results

No clear tendency could be derived from the results of the inference statistical calculations and the correlation analyses with regard to the distance of the monitoring site to the sea and the altitude. According to the results of the CART-analyses mainly the moss species, potential emission sources around the monitoring sites, canopy drip and precipitation have an effect on the metal bioaccumulation. Assuming that each participating country followed strictly the manual for sampling and sample preparation the results of the inference statistical calculations furthermore suggest that in most cases different techniques for digestion and analysis bias the measurements significantly.

Discussion

For the first time a national monitoring data base consisting of measurement data and metadata as well as surface information on precipitation, land use and elevation was applied to examine influence factors on the metal bioaccumulation in mosses. The respective results mirror existing knowledge from other national studies to a large extend, although further analyses are necessary to affirm the findings. These analyses should include data from other national monitoring programmes and should additionally be carried out with other decision tree algorithms than CART.

Conclusions

The local variability in the metal concentration in mosses can be uncovered in terms of predictors or underlying hidden causes by using CART. Ideally, such an approach should be applied across the whole of Europe. This will only be feasible if all participating countries provide additional information about site characteristics as currently is done in for example the German moss surveys.

Recommendations

The UNECE Metals in Mosses Survey experimental protocol should be improved in order to reduce the observed influences, to enhance standardisation, and to strengthen the quality control. This implies the integration of sampling site describing metadata into the assessment. Furthermore, basis research is needed to test the hypothesis concerning moss species-specific accumulation of depositions.

Perspectives

Provided that the presented results hold true in further analyses correction factors should be applied on the moss data in order to get the depicted spatial patterns and temporal trends of metal bioaccumulation unbiased. Such factors should be calculated for natural landscape units or ecoregions that are homogeneous with regard to climate, vegetation and altitude.     

Time management and nectar flow: flower handling and suction feeding in long-proboscid flies (Nemestrinidae: Prosoeca)

A well-developed suction pump in the head represents an important adaptation for nectar-feeding insects, such as Hymenoptera, Lepidoptera and Diptera. This pumping organ creates a pressure gradient along the proboscis, which is responsible for nectar uptake. The extremely elongated proboscis of the genus Prosoeca (Nemestrinidae) evolved as an adaptation to feeding from long, tubular flowers. According to the functional constraint hypothesis, nectar uptake through a disproportionately elongated, straw-like proboscis increases flower handling time and consequently lowers the energy intake rate. Due to the conspicuous length variation of the proboscis of Prosoeca, individuals with longer proboscides are hypothesised to have longer handling times. To test this hypothesis, we used field video analyses of flower-visiting behaviour, detailed examinations of the suction pump morphology and correlations of proboscis length with body length and suction pump dimensions. Using a biomechanical framework described for nectar-feeding Lepidoptera in relation to proboscis length and suction pump musculature, we describe and contrast the system in long-proboscid flies. Flies with longer proboscides spent significantly more time drinking from flowers. In addition, proboscis length and body length showed a positive allometric relationship. Furthermore, adaptations of the suction pump included an allometric relationship between proboscis length and suction pump muscle volume and a combination of two pumping organs. Overall, the study gives detailed insight into the adaptations required for long-proboscid nectar feeding, and comparisons with other nectar-sucking insects allow further considerations of the evolution of the suction pump in insects with sucking mouthparts.     

Mapping atmospheric depositions of cadmium and lead in Germany based on EMEP deposition data and the European Moss Survey 2005

Background

The vertical migration of phytoplankton was investigated in natural waters using in situ fluorescence profiling, chlorophyll a concentrations and life counts at two study sites differing in coloured dissolved organic matter (cDOM) concentrations. The data from the corresponding water depths (50-cm intervals down to 10 m) and times (hourly, before dawn to sunset, several days) were related to the highly resolved (2 nm) underwater ultraviolet radiation (UVR)/photosynthetic active radiation (PAR) transparency (290 to 700 nm).

Results

Chlorophyll a maxima of mainly motile dinoflagellates were observed in situ at all days and at both study sites (open marine, brackish waters), independent on prevailing weather conditions or cDOM concentrations. Phytoplankton migration was triggered solely by irradiance in the 400- to 700-nm wavelength range (PAR) at the particular water depth, irrespective of PAR/UVR ratios and surface UVR (290 to 400 nm), after an illumination period of about 40 min. Interestingly, the PAR tolerance levels of the phytoplankton, which have been lower in cDOM-rich waters, matched their light acclimation values determined by parallel PAM measurements.

Conclusions

The response of the phytoplankton to PAR is not a sufficient protection strategy versus increasing UVR levels, which might have wide ecological implications beyond the level of primary producers to impact important ecosystem functions such as the delicate trophic interactions.     

Analyzing the carbon dynamics of central European forests: comparison of Biome-BGC simulations with measurements

Biogeochemical models are often used for making projections of future carbon dynamics under scenarios of global change. The aim of this study was to assess the accuracy of the process-based biogeochemical model Biome-BGC for application in central European forests from the lowlands to upper treeline as a pre-requisite for environmental impact assessments. We analyzed model behavior along an altitudinal gradient across the alpine treeline, which provided insights on the sensitivity of simulated average carbon pools to changes in environmental factors. A second set of tests included medium-term (30 years) simulations of carbon fluxes, and a third set of tests focused on daily carbon and water fluxes. Model results were compared to aboveground biomass measurements, leaf area index recordings as well as net ecosystem exchange (NEE) and actual evapotranspiration (AET) measurements. The simulated medium-term forest growth agreed well with measured data. Also daily NEE fluxes were simulated adequately in most cases. Problems were detected when simulating ecosystems close to the upper timberline (overestimation of measured growth and pool sizes), and when simulating daily AET fluxes (overestimation of measured fluxes). The results showed that future applications of Biome-BGC could benefit much from an improvement of model algorithms (e.g., the Q₁₀ model for respiration) as well as from a detailed analysis of the ecological significance of crucial parameters (e.g., the canopy water interception coefficient).     

Is there a Relation Between Ecological Practices and Spirituality? The Case of Benedictine Monasteries

For decades there has been a controversial debate over how far religious faith communities are specifically engaged in ecological practices (EP). Therefore we studied four Austrian and two German Benedictine monasteries religious ethics and spirituality as a means of a driving force for initiating EP. We draw upon theories of organizational learning processes and capacity-building of sustainability to interpret our empirical findings. The majority of monasteries are highly engaged in EP, initiated either as an outcome of individual activities or through a specific mostly informally acting group, but rarely an organizationally or systematically integrated goal of the monasteries, or a focus of capacity building. Monasteries follow a technical and economic decision-making process in implementing EP. Spirituality plays a limited role in the initiation of EP. The environment of monasteries–acceptance or critique against ecological practices–influences the monasteries decisions. Institutionalization of ecological practices into the monasteries organizational structure is rare.     

Micropollutants in three tributaries of Lake Constance, Argen, Schussen and Seefelder Aach: a literature review

A literature review made evident that in three tributaries of Lake Constance, Argen, Schussen and Seefelder Aach 82 micropollutants (including 3 metabolites of pesticides) were detected in at least one of the streams. Quality standards according to the EU Water Frame Directive (which however comprises only 16 of the detected chemicals) are not exceeded in any of the streams. The comparison of maximal values with existing threshold values and effect concentrations obtained in ecotoxicological analyses and biomarker studies revealed 35 substances to be of relevance in at least one of the three waters. These were 5 chemicals in the Argen, 31 chemicals in the Schussen, and 17 chemicals in the Seefelder Aach, for which effects on mortality, development, health or reproduction in aquatic organisms cannot be excluded.     

Polychlorinated biphenyls (PCBs) in indoor air originating from sealants in contaminated and uncontaminated apartments within the same housing estate

Twenty-four congeners of polychlorinated biphenyls (PCBs) were measured in 83 air samples and 20 elastic sealants samples of apartments with PCB-containing sealants. In addition, PCBs were measured in 21 air samples from reference apartments located in an uncontaminated section of the same estate. The PCB_tot levels in the air of the contaminated section were 168-3843 ng m⁻³ (mean: 1030 ng m⁻³), while the mean levels in the reference apartments were 6.03 ng m⁻³. The sum of the 24 measured PCB congeners in sealants from the contaminated section was 187-221 680 mg kg⁻¹. Principal component analysis revealed four groups among the sealant samples with different congener compositions, only two of which were clearly similar to known PCB mixtures, while two were not. Significant correlations and intercorrelations were observed between the lower chlorinated congeners in air and sealant, e.g. for PCB 28_air and 28_seal (p = 0.04) and for PCB 28_air and 52_air, 52_seal. However, no correlation was observed between the lower chlorinated congeners and the sums of PCB (∑PCB₆ or ∑PCB₂₄) or the higher chlorinated congeners. Analysis of air concentrations in relation to questionnaire data indicated that the indoor air levels could be reduced by increased cleaning and airing frequencies.     

Environmental and health effects of nanomaterials in nanotextiles and façade coatings

Engineered nanomaterials (ENM) are expected to hold considerable potential for products that offer improved or novel functionalities. For example, nanotechnologies could open the way for the use of textile products outside their traditional fields of applications, for example, in the construction, medical, automobile, environmental and safety technology sectors. Consequently, nanotextiles could become ubiquitous in industrial and consumer products in future. Another ubiquitous field of application for ENM is fa?ade coatings. The environment and human health could be affected by unintended release of ENM from these products. The product life cycle and the product design determine the various environmental and health exposure situations. For example, ENM unintentionally released from geotextiles will probably end up in soils, whereas ENM unintentionally released from T-shirts may come into direct contact with humans and end up in wastewater. In this paper we have assessed the state of the art of ENM effects on the environment and human health on the basis of selected environmental and nanotoxicological studies and on our own environmental exposure modeling studies. Here, we focused on ENM that are already applied or may be applied in future to textile products and fa?ade coatings. These ENM's are mainly nanosilver (nano-Ag), nano titanium dioxide (nano-TiO(2)), nano silica (nano-SiO(2)), nano zinc oxide (nano-ZnO), nano alumina (nano-Al(2)O(3)), layered silica (e.g. montmorillonite, Al(2)[(OH)(2)/Si(4)O(10)]nH(2)O), carbon black, and carbon nanotubes (CNT). Knowing full well that innovators have to take decisions today, we have presented some criteria that should be useful in systematically analyzing and interpreting the state of the art on the effects of ENM. For the environment we established the following criteria: (1) the indication for hazardous effects, (2) dissolution in water increases/decreases toxic effects, (3) tendency for agglomeration or sedimentation, (4) fate during waste water treatment, and (5) stability during incineration. For human health the following criteria were defined: (1) acute toxicity, (2) chronic toxicity, (3) impairment of DNA, (4) crossing and damaging of tissue barriers, (5) brain damage and translocation and effects of ENM in the (6) skin, (7) gastrointestinal or (8) respiratory tract. Interestingly, some ENM might affect the environment less severely than they might affect human health, whereas the case for others is vice versa. This is especially true for CNT. The assessment of the environmental risks is highly dependent on the respective product life cycles and on the amounts of ENM produced globally.