Geochemical and radionuclide profile of Tuzla geothermal field, Turkey

Tuzla geothermal basin is situated in north-western Turkey on the Biga Peninsula, which is located at the west end of the Northern Anatolian Fault system. Soil and water samples were collected between August 2003 and June 2004 to initiate development of a geochemical profile of surface and subsurface waters in the geothermal basin and radionuclide concentrations in soils. All water samples were found to fall within Turkish Water Quality Class 4, meaning they were remarkably contaminated for any water consumption sector (industrial, human use or agricultural) based on sodium and chloride ions. Such waters could be used only after appropriate water treatment. The water samples are of the chloride type in terms of geochemical evaluation. Preliminary geochemical evidence shows that the N-S flowing part of the Tuzla River acts as a natural barrier within the basin. Heavy metal concentrations in the soil samples show slight elevations, especially those obtained from the east part of the basin where thermal springs are dominant. Geochemical calculations were carried out with PHREEQC software to determine equilibrium concentration of chemical species and saturation indices, by which it is suggested that chloride is the most important ligand to mobilize the heavy metals in the studied system. In addition, the activity concentration and gamma-absorbed dose rates of the terrestrial naturally occurring radionuclides were determined in the soil using gamma-ray spectrometry. The soil activity ranged from 42.77 to 988.66 Bq kg(-1) (averaging 138 Bq kg(-1)) for ( 238 )U, 13.27 to 106.31 Bq kg(-1) (averaging 32.42 Bq kg(-1)) for ( 232 )Th, and 99.28 to 935.36 Bq kg(-1) (averaging 515.44 Bq kg(-1)) for ( 40 )K. The highest value of ( 238 )U was found in the soil samples obtained from an area close to the hot spring.     

Monitoring the drastic growth of ship breaking yards in Sitakunda: a threat to the coastal environment of Bangladesh

The vast coastal and marine resources that occur along the southern edge of Bangladesh make it one of the most productive areas of the world. However, due to growing anthropogenic impacts, this area is under considerable environmental pressure from both physical and chemical stress factors. Ship breaking, or the dismantling and demolition of out-of-service ocean-going vessels, has become increasingly common in many coastal areas. To investigate the extent of ship breaking activities in Bangladesh along the Sitakunda coast, various spatial and non-spatial data were obtained, including remote sensing imagery, statistical records and published reports. Impacts to coastal and marine life were documented. Available data show that ship breaking activities cause significant physical disturbance and release toxic materials into the environment, resulting in adverse effects to numerous marine taxonomic groups such as fish, mammals, birds, reptiles, plants, phytoplankton, zooplankton and benthic invertebrates. Landsat imagery illustrates that the negatively impacted coastal area has grown 308.7 % from 367 ha in 1989 to 1,133 ha in 2010. Physicochemical and biological properties of coastal soil and water indicate substantially elevated pollution that poses a risk of local, regional and even global contamination through sea water and atmospheric transport. While damage to the coastal environment of Bangladesh is a recognized hazard that must be addressed, the economic benefits of ship breaking through job creation and fulfilling the domestic demand for recycled steel must be considered. Rather than an outright ban on beach breaking of ships, the enterprise must be recognized as a true and influential industry that should be held responsible for developing an economically viable and environmentally proactive growth strategy. Evolution of the industry toward a sustainable system can be aided through reasonable and enforceable legislative and judicial action that takes a balanced approach, but does not diminish the value of coastal conservation.     

Study on Properties of Poly(urethane-ester) Synthesized from Prepolymers of ε-Caprolactone and 2,2-Dimethyl-1,3-Propanediol Monomers and Their Biodegradability

Poly(urethane-ester) was prepared by polymerization of 4,4′-methylenebis(phenyl isocyanate) (MDI) and prepolymers of ε-caprolactone and 2,2-dimethyl-1,3-propanediol monomers P(CL-DP) with various chain lengths as polyol sources. Characterizations of poly(urethane-ester) were carried out by analysis of functional groups (FTIR), thermal properties (DTA/TGA), mechanical properties (Tensile tester), crystallinity (XRD), and biodegradability. The chain length of prepolymers used in polymerization has a significant effect in properties of poly(urethane-ester) as well as their biodegradability. The formation of poly(urethane-ester) was indicated by the presence of new absorption peaks at wave number of 3,348.2 and 1,596.9 cm^?1 for urethane (–NH–) and aromatic groups in chain of polymers, respectively. The increase chain length of prepolymer used in polymerization with 4,4′-methylenebis(phenyl isocyanate) was observed the increase thermal property and crystallinity of poly(urethane-ester). However, the maximum mechanical property and also biodegradability in activated sludge were observed in poly(urethane-ester) prepared by polymerization of 4,4′-methylenebis(phenyl isocyanate) (MDI) and P(CL-DP) prepolymers with DP/CL ratio of 1/20. Apparently, the amorphous parts of polymers are rapidly decomposed by enzymes of microorganisms, so the crystallinity on the whole of poly(urethane-ester) increases after incubation time of 30 days.     

Phosphorous in the environment: characteristics with distribution and effects,removal mechanisms,treatment technologies,and factors affecting recovery as minerals in natural and engineered systems

Environmental Science and Pollution Research - Phosphorus (P), an essential element for living cells, is present in different soluble and adsorbed chemical forms found in soil, sediment, and water....     

Batch and continuous biosorption of Cu by immobilized biomass of Arthrobacter sp.

The ability of free and polysulphone immobilized biomass of Arthrobacter sp. to remove Cu²⁺ ions from aqueous solution was studied in batch and continuous systems. The Langmuir and Freundlich isotherm models were applied to the data. The Langmuir isotherm model was found to fit the sorption data indicating that sorption was monolayer and uptake capacity (Q^o) was 175.87 and 158.7 mg/g for free and immobilized biomass respectively at pH 5.0 and 30 °C temperature, which was also confirmed by a high correlation coefficient, a low RMSE and a low Chi-square value. A kinetic study was carried out with pseudo-first-order reaction and pseudo-second-order reaction equations and it was found that the Cu²⁺ uptake process followed the pseudo-second-order rate expression. The diffusivity of Cu²⁺ on immobilized beads increased (0.402 × 10⁻⁴ to 0.435 × 10⁻⁴ cm²/s) with increasing concentration from 50 to 150 mg/L. The maximum percentage Cu²⁺ removal (89.56%) and uptake (32.64 mg/g) were found at 3.5 mL/min and 20 cm bed height. In addition to this the Bed Depth Service Time (BDST) model was in good agreement with the experimental data with a high correlation coefficient (>0.995). Furthermore, sorption and desorption studies were also carried out which showed that polysulphone immobilized biomass could be reused for up to six sorption–desorption cycles.     

A comparative decision-making model for sustainable end-of-life vehicle management alternative selection using AHP and extent analysis method on fuzzy AHP

Environmental protection and sustainable development are getting increasing attention in the automobile industries. Environmental consciousness has increased, and sustainability has become an important requirement for the management of end-of-life vehicles (ELVs). The proper management of ELVs can bring improved sustainability performance for any society or organisation. There are several alternative options for ELVs management such as reuse, repair, reconditioning, remanufacturing and recycling. Environmental legislation is forcing original equipment manufacturers (OEMs) to manage their products at the end of their life cycle to reduce their potential environmental impact. An appropriate selection model for sustainable ELV management alternatives in the dynamic, competitive and regulatory environment can enable a firm to satisfy economic, environmental, social and technological requirements. This study proposes an integrated model to select the dimensions and criteria for evaluating sustainable alternatives for the proper management of ELVs. First, the Decision-Making Trial and Evaluation Laboratory (DEMATEL) method is used to select the most important dimensions and criteria for sustainable alternative selection. Next, a hierarchy has been constructed to develop a systematic technique to solve the alternatives selection problem. An analytic hierarchy process (AHP) and extent analysis method on the fuzzy AHP (FEAHP) model have been used based on the hierarchy to evaluate the most suitable alternatives from the sustainability point of view. The strength of the proposed model is that it compares the results of both methods, the imprecision of experts’ opinions is considered in the evaluation process and the model is easy to use.     

Improving the diagnosis of bovine tuberculosis using gold nanoparticles conjugated with purified protein derivative: special regard to staphylococcal protein A and streptococcal protein G

Environmental Science and Pollution Research - Different ancillary immunodiagnostic tests were traditionally-established for diagnosis of bovine tuberculosis (BTB) either cellular or humoral as...     

Chemical speciation of carbon in municipal solid waste incinerator residues

Incinerators do not achieve a complete mineralization of organic constituents of municipal solid waste. The solid residues (bottom ash, boiler ash and air pollution control residues) contain carbon which can be determined as total organic carbon (TOC). This work focuses on the TOC composition and its significance to the genesis and diagenesis of the solid residues. An analytical procedure is presented to characterize carbon species by different chemical and microscopic analytical methods. The procedure is based on two steps. In the first step a quantitative classification of TOC into four different carbon species (elemental carbon, water extractable organic carbon, dichloromethane extractable organic carbon and non extractable organic carbon) is performed to obtain a first survey of the TOC composition. Based on this survey a further characterization of individual carbon species is performed. The results of the qualitative and quantitative characterization of carbon species allow to postulate hypotheses on the influence of organic carbon on the long-term behavior of the solid residues.     

Mission assurance policy and risk management in cybersecurity

Mission assurance policy and risk management are essential in enabling decision makers to ensure successful completion of missions by addressing the security status of cyber assets. This paper presents a novel mission assurance policy that adapts to the dynamic security status of all mission assets to quickly and automatically determine mission assurance level and to decide what changes are needed accordingly. The novelty of this mission assurance policy stems from using a time Petri net model for determining the security status of cyber assets, and then employing binary or multi-valued logic decision diagrams to assess the mission assurance level. The ability of a mission assurance policy to successfully complete its objectives depends mainly on whether a risk management scheme is provided to reduce risk to an acceptable level. To that end, this paper also describes a risk management scheme to systematically deal with the main factors of risk management such as the temporal interdependencies of cyber assets, impact of attacks, and risk mitigation. Given that the status of cyber assets changes due to the dynamic cybersecurity environment of asset vulnerabilities, threats, and recovery, the proposed mission assurance policy and risk management scheme enable decision makers to cope with the real-time assessment of mission assurance level.