Conceptual framework for evaluation of ecotourism carrying capacity for sustainable development of Karkheh protected area,Iran

The maintenance of natural and virgin ecosystems against an unnecessary influx of humans requires a modern and efficient model such as the carrying capacity model to optimize the management and development of ecotourism in these areas. The model is one of the key tools for conservation and sustainability of these areas. The present research attempts to formulate a framework for the ecotourism carrying capacity model for sustainable development of Karkheh protected area in Iran. The information was collected using a citation method as well as, interviews with experts, and visitors, and director of the region with 24 key indicators being regulated by field surveys and library studies. In this study, the network analysis process model, the Pressure-State-Response conceptual model, and Arc GIS_10.5 software were used to determine the potential for the establishment of ecotourism performance in the scale of 1: 50,000. In this research, 70 questionnaires were completed by experts in the field of environment and ecotourism to determine the relative importance of effective pressures. According to the results, the highest values belonged to physical carrying capacity (13,425,681 persons per day), ecological carrying capacity (2,482,226 persons per day), and social and culture (985,706 people per day), respectively. Based on the regional carrying capacity, the physical, ecological, and social carrying capacity index was calculated as 3356, 621, and 246 (greater than one), respectively. According to the results, the region has a high carrying capacity, which can accept visitors.     

Time-lapse resistivity investigation of salinity changes at an ex-promontory land: a case study of Carey Island, Selangor, Malaysia

Time-lapse resistivity measurements and groundwater geochemistry were used to study salinity effect on groundwater aquifer at the ex-promontory-land of Carey Island in Malaysia. Resistivity was measured by ABEM Terrameter SAS4000 and ES10-64 electrode selector. Relationship between earth resistivity and total dissolved solids (TDS) was derived, and with resistivity images, used to identify water types: fresh (ρ ( e ) > 6.5 Ω m), brackish (3 Ω m < ρ ( e ) < 6.5 Ω m), or saline (ρ ( e ) < 3 Ω m). Long-term monitoring of the studied area's groundwater quality via measurements of its time-lapse resistivity showed salinity changes in the island's groundwater aquifers not conforming to seawater-freshwater hydraulic gradient. In some aquifers far from the coast, saline water was dominant, while in some others, freshwater 30 m thick showed groundwater potential. Land transformation is believed to have changed the island's hydrogeology, which receives saltwater pressure all the time, limiting freshwater recharge to the groundwater system. The time-lapse resistivity measurements showed active salinity changes at resistivity-image bottom moving up the image for two seasons' (wet and dry) conditions. The salinity changes are believed to have been caused by incremental tide passing through highly porous material in the active-salinity-change area. The study's results were used to plan a strategy for sustainable groundwater exploration of the island.     

Impact assessment of subsurface drainage on waterlogged and saline lands

Waterlogging and salinity due to seepage from canals have polluted land and environment in various parts of Pakistan. A sustainable environment requires urgent remedial measures for this problem. The research in this paper presents the impacts of the Fourth Drainage Project, Faisalabad on the twin problem of waterlogging and salinity. Monitoring of the project was made on regular basis. The key performance indicators for the project include the lowering of water table, improvement of water quality and soil salinity, increase in area under cultivation, cropping intensity, and socioeconomic status of the project population. Data regarding water levels and discharge from the drain pipes were collected to monitor the impact on waterlogging. Soil samples were tested to evaluate the impact of drainage on land. It has been found that the percentage of the contaminated land in the project area has considerably been decreased, while the cropping intensities have been increased.     

Experimental study and theoretical prediction of mechanical properties of ultra-high-performance concrete incorporated with nanorice husk ash burning at different temperature treatments

Environmental Science and Pollution Research - This research aimed to investigate the effect of nanorice husk ash (NRHA) prepared using different thermal treatment methods on ultra-high-performance...     

Polymeric Nanocomposite-Based Herbicide of Carboxymethyl Cellulose Coated-Zinc/Aluminium Layered Double Hydroxide-Quinclorac: A Controlled Release Purpose for Agrochemicals

Journal of Polymers and the Environment - In this work, the use of carboxymethyl cellulose (CMC) is highlighted in enhancing the controlled release behaviour of zinc/aluminium layered double...     

Titania-supported silver-based bimetallic nanoparticles as photocatalysts

Photocatalytic process has shown recently a great potential as an environmental friendly and clean remediation technology for organic pollutants in wastewater. This work described the synthesis of silver-based bimetallic nanoparticles using colloid chemistry and the subsequent immobilization onto titania to form composite photocatalytic materials (titania-supported Ag–Pt nanoparticles). The photocatalysts were characterized by X-ray diffraction, electron microscopy, and nitrogen physisorption. The catalytic activity of the photocatalysts was evaluated by photocatalytic degradation of phenol and 2-chlorophenol (2-CP) in synthetic wastewater solutions. The photocatalytic processes were conducted in a batch photoreactor containing appropriate solutions of phenol and 2-CP with UV irradiation of 450 W. UV-visible spectrophotometer was used for analyzing the concentration of phenol and 2-CP in solutions. Parameters affecting the photocatalytic process such as the solution pH, phenol and 2-CP concentrations, and catalyst concentration were investigated. The results obtained revealed that TiO₂-supported Ag/Pt nanoparticles showed a higher activity for UV-photocatalytic degradation of both phenol and 2-CP pollutants in the solution (as compared to the plain rutile TiO₂). The photodegradation processes were optimized by the 0.5-g/L catalyst with a pollutant concentration of 50 mg/L for all the samples. Complete degradation for both phenol and 2-CP was achieved after 120 min.     

Positive environmental effects of the coronavirus 2020 episode: a review

Environment, Development and Sustainability - The outbreak of COVID-19 has made a global catastrophic situation that caused 1,039,406 deaths out of 35,347,404 infections, and it will also cause...     

Assessment of cytotoxicity and toxicity for phosphonium-based deep eutectic solvents

In this work, the cytotoxicity and toxicity of phosphonium-based deep eutectic solvents (DESs) with three hydrogen bond donors, namely glycerine, ethylene glycol, and triethylene glycol were investigated. The cytotoxicity effect was tested using brine shrimp (Artemia salina). The toxicity was investigated using the two Gram positive bacteria Bacillus subtilis and Staphylococcus aureus, and two Gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The cytotoxicity of tested DESs was much higher than that of their individual components, indicating their toxicological behavior was different. It was also found that there was toxic effect on the studied bacteria, indicating their potential application as anti-bacterial agents. To the best of our knowledge, this is the first time the cytotoxicity and toxicity of phosphonium-based DESs were studied.