Characteristics of granular sludge developed in an upflow anaerobic sludge fixed-film bioreactor treating palm oil mill effluent.

In the present study, characteristics of the granular sludge (including physical characteristics under stable conditions and process shocks arising from suspended solid overload, soluble organic overload, and high temperature; biological activity; and sludge kinetic evaluation in a batch experiment) developed in an upflow anaerobic sludge blanket fixed-film reactor for palm oil mill effluent (POME) treatment was investigated. The main aim of this work was to provide suitable understanding of POME anaerobic digestion using such a granular sludge reactor, particularly with respect to granule structure at various operating conditions. The morphological changes in granular sludge resulting from various operational conditions was studied using scanning electron microscopy and transmission electron microscopy images. It was shown that the developed granules consisted of densely packed rod- (Methanosaeta-like microorganism; predominant) and cocci- (Methanosarsina) shaped microorganisms. Methanosaeta aggregates functioned as nucleation centers that initiated granule development of POME-degrading granules. Under the suspended solid overload condition, most of the granules were covered with a thin layer of fiberlike suspended solids, so that the granule color changed to brown and the sludge volume index also increased to 24.5 from 12 to 15 mL/g, which caused a large amount of sludge washout. Some of the granules were disintegrated because of an acidified environment, which originated from acidogenesis of high influent organic load (29 g chemical oxygen demand [COD]/L d). At 60 degrees C, the rate of biomass washout increased, as a result of disintegration of the outer layer of the granules. In the biological activity test, approximately 95% COD removal was achieved within 72 hours, with an initial COD removal rate of 3.5 g COD/L d. During POME digestion, 275 mg calcium carbonate/L bicarbonate alkalinity was produced per 1000 mg COD(removed)/ L. A consecutive reaction kinetic model was used to simulate the data obtained from the sludge activity in the batch experiment. The mathematical model gave a good fit with the experimental results (R2 > 0.93). The slowest step was modeled to be the acidification step, with a rate constant between 0.015 and 0.083 hours(-1), while the rate constant for the methanogenic step was obtained to be between 0.218 and 0.361 hours(-1).     

Landfill leachate treatment by electrochemical oxidation

This study investigated the electrochemical oxidation of stabilized leachate from Pulau Burung semi-aerobic sanitary landfill by conducting laboratory experiments with sodium sulfate Na₂SO₄ (as electrolyte) and graphite carbon electrodes. The control parameters were influent COD, current density and reaction time, while the responses were BOD removal, COD removal, BOD:COD ratio, color and pH. Na₂SO₄ concentration was 1 g/L. Experiments were conducted based on a three-level factorial design and response surface methodology (RSM) was used to analyze the results. The optimum conditions were obtained as 1414 mg/L influent COD concentration, 79.9 mA/cm² current density and 4 h reaction time. This resulted in 70% BOD removal, 68% COD removal, 84% color removal, 0.04 BOD/COD ratio and 9.1 pH. Electrochemical treatment using graphite carbon electrode was found to be effective in BOD, COD and color removal but was not effective in increasing the BOD/COD ratio or enhancing biodegradability of the leachate. The color intensity of the treated samples increased at low influent COD and high current density due to corrosion of electrode material.     

Effects of temperature and pH on conjugal transfer of zinc-resistant plasmids residing in Gram-negative bacteria isolated from industrial effluents

Two zinc (Zn)-resistant strains, AnZn-1 and AnZn-2, which were resistant to ZnSO4 up to 12.5 mg ml(-1) were isolated from industrial effluents. Both were Gram-negative with motile cells. They exhibited tolerance to Ba2+, Ni+, Co2+, Mn2+, Cu2+, Fe2+, Ni2+, Cd2+, kanamycin, chloramphenicol, ampillicin and tetracycline, but were sensitive to Hg2+ and streptomycin. For AnZn-1 and AnZn-2, the optimum pH for growth was 7. Both were facultative anaerobes and had cytochrome oxidase and urease enzymes, while catalase was present only in AnZn-2. Both strains had the ability to hydrolyse gelatin, reduce nitrate, and yield acid from arabinose and rhamnose. The two strains shared maximum characters with Vibrionaceae. Each strain carries a single Zn-resistant conjugative plasmid. The plasmid residing in AnZn-1 (pSH1211) displayed a lower level of resistance than the plasmid of AnZn-2 (pSH1212). Both required a minimum of 24 h for mating and showed highest transfer frequency at 25 degrees C. pSH1211 preferred pH 7 and pSH1212 pH 8.5 for their transfer. Both plasmids, when allowed to mate with Escherichia coli at 25 degrees C, alkaline pH values of 8-8.5 (pSH1211) of pH 7.5 (pSH1212), showed increased transfer frequency.     

Airborne and allergenic fungal spores of the Karachi environment and their correlation with meteorological factors

Airborne fungal spores are well known to cause respiratory allergic diseases particularly bronchial asthma, allergic rhinitis, rhino-conjunctivitis and allergic broncho-pulmonary aspergillosis in both adults and children. In order to monitor and analyze airborne fungal flora of the Karachi environment, an aeromycological study was conducted using a Burkard 7-Day Recording Volumetric Spore Trap from January to December 2010. The data recorded from the Spore Trap was further analyzed for percent catch determination, total spores concentration, seasonal periodicities and diurnal variations. Cladosporium spp (44.8%), Alternaria spp. (15.5%), Periconia spp (6.1%), Curvularia spp (2.1%), Stemphylium spp (1.3%) and Aspergillus/Penicillium type (1%) emerged to be major components constituting more than 70% of the airborne fungal flora. Cladosporium, Curvularia and Stemphylium displayed a clear seasonal trend, while there were no clear seasonal trends for other fungal spore types. Diurnal variations were observed to be mainly having daytime maxima. Spearman Rank Correlation Coefficient analysis was conducted using various weather parameters. The various fungal types showed a negative correlation with heat index, dew point, wind velocity and wind chill. However, a positive correlation was found with humidity, rain and barometric pressure. In fact, Alternaria, Bipolaris and Periconia showed a negative correlation with temperature, while Cladosporium and Periconia showed a negative correlation with heat index, dew point, wind velocity and wind chill. The barometric pressure was positively correlated with Cladosporium. On the basis of these findings, it can be concluded that a number of fungal spores are present in the atmosphere of Karachi throughout the year, with certain atmospheric conditions influencing the release, dispersion, and sedimentation processes of some genera. It is expected that clinicians will use the identified fungal flora for diagnosis and treatment and/or adopt preventative measures for allergic individuals.     

Switching behaviors toward green brands: evidence from emerging economy

The aim of the current research was to recognize consumer attitude gap toward green brand by studying role of green consumer value and green brand equity toward the switching intention and purchase intention of consumers toward green brands. The current research employed quantitative research design and collected data through questionnaire from 331 respondents. The PLS-structural equation modeling was employed to analyze the structured relationships. The findings suggest green customer value is product of the three important factors namely green brand experiential risk, green brand experiential quality and green brand experience. Hence, these act as the main drivers of switching consumer behavioral intention toward the green products through consumer green brand equity. The research attempts to study the attitude–behavior gap in the green marketing literature by investigating the role which includes, green brand experiential risk, green brand experiential quality and green brand experience on customer value leading to green brand equity. The research provide an in-depth understating of attitude–behavior gaps and role of green customer value and brand equity that plays vital role in marketing campaigns and policy making to increase purchase intention of green eco-conscious products.

     

Suicide bombings: process of care of mass casualties in the developing world

In recent times Pakistan's biggest city, Karachi, has witnessed numerous terrorist attacks. The city does not have an emergency response system and only one of the three public sector hospitals has a trauma centre. We describe the pattern of injuries and management of two terror-related mass casualty incidents involving suicide bombers in a developing nation with limited resources. The first incident occurred in May 2002 with 36 casualties, of whom 13 (36%) died immediately and 11 (30.5%) died at the primary receiving hospitals. The second incident was targeted against the local population in May 2004. The blast resulted in 104 casualties, of which 14 (13.46%) died at the site. All patients had their initial assessment and treatment based on Advanced Trauma and Life Support principles and documented on a trauma form.     

Environmental effects on perishable product quality and trading under OBOR supply chain different route scenarios

Environmental Science and Pollution Research - The world becomes advance rapidly, and the demand of perishable food increases in the global market. Food firms perceive the cheapest supply chain...     

Solid waste collection and recycling in Nibong Tebal, Penang, Malaysia: a case study.

The implementation of a suitable solid waste management programme with appropriate methods of recycling as an inherent element is vital to the alleviation of the problems associated with solid waste generation, handling and disposal, environmental conservation, public hygiene, etc. The present work is a case study on solid waste collection and recycling practices in Nibong Tebal town, Penang, Malaysia. The amount and types of domestic waste generated, household participation in recycling, identification of existing problems related to the implementation of the recycling programme, etc. formed the basis of this study. Surveys (interviews/questionnaires) and on-site observations were conducted to gather information on the solid waste collection and recycling practice of the residents. A focus group of 60 individuals was selected and their response to a questionnaire, prepared according to a Likert scale, was obtained and analysed. The majority of the respondents expressed concerns about recycling and wanted more to be done in this regard. Illegal collection, aesthetically displeasing sites and a lack of public awareness were problems of major concern. Issues related to inadequate funding and manpower as well as end market are also addressed and suggestions made.