基于强度理论及虚拟仿真相结合的行星减速机构可靠性分析

基于破煤理论建立了采煤机的力学模型,采用ADAMS建立采煤机刚柔耦合模型,并解决了边界条件添加、接触法向力提取等技术问题,分析了行星轴、架的可靠性;基于行星减速机构强度校核基本原理,开发了行星齿轮强度校核软件,以虚拟仿真中的动态接触法向力为输入,对某公司两种行星减速机构设计方案中各齿轮的接触应力和弯曲应力进行研究。该方法解决了传统分析中齿轮受力无法确定以及采用有限元软件无法求解齿根弯曲应力、求解接触应力时间过长的不足。结果表明:二级行星减速机构采用4行星轮结构要优于采用3行星轮方案,传动更稳定、可靠。     

UV-H2O2工艺对饮用水中 DMP的去除效果和影响因素

采用UV-H2O2工艺对饮用水中内分泌干扰物邻苯二甲酸二甲酯(DMP)的去除进行研究,结果表明,单独的UV或H2O2都不能有效氧化去除DMP;而UV-H2O2联用工艺对饮用水中DMP具有很好的去除效果.在原水DMP浓度为5.1496×10-3mmol·l-1(1.0mg·l-1)左右,UV光强133.9μW·cm-2,H2O2投加量20mg·l-1和反应时间60min条件下,DMP的去除率可达到97.8%.探讨了反应速率常数随影响因素变化的规律,其中H2O2浓度、pH值、DMP初始浓度和本底TOC值对该工艺去除DMP的影响较大.     

太湖水体散射特性及其与悬浮物浓度关系模型

水体散射特性与水环境参数如悬浮颗粒及其浓度密切相关.利用Wetlabs公司研制的水体固有光学特性测量系统,于2006-10～2006-11对太湖水体的散射系数和后向散射系数进行了测量.在对水体散射特性分析的基础上,建立了太湖水体颗粒物后向散射系数的光谱模型.此外,利用后向散射率计算水体折射系数,根据折射系数的变化范围,将水中颗粒物的主导因子分为3种类型：①浮游植物主导;②无机颗粒物主导;③两者共同主导.在对散射系数与无机悬浮物、有机悬浮物、总悬浮物浓度相关性分析的基础上,针对颗粒物主导因子的不同,分别建立了散射系数与无机悬浮物浓度的乘幂关系模型.     

南昌市雨水和湖水硫同位素特征的研究

为探讨南昌市酸雨的硫源,研究了2006年南昌市区雨水、湖水的pH值、硫酸根离子浓度和硫同位素组成,并对市区用煤的δ34S值进行了测定。结果表明,雨水硫同位素组成的变化范围在-3.5‰~5.5‰之间,且具有夏季轻,冬、春季重的特点。湖泊水、赣江水的δ34S值变化范围在4.3‰~10.3‰之间。2006年南昌市酸雨污染较严重,冬春季时雨水的酸度较大。雨水中硫的来源是由生物成因硫、人为成因硫和海源硫综合贡献的,夏季生物硫贡献比重大,冬春季人为硫是主要贡献者,海源硫贡献可能很小。     

Positive Feedback Loop between Introductions of Non‐Native Marine Species and Cultivation of Oysters in Europe

With globalization, agriculture and aquaculture activities are increasingly affected by diseases that are spread through movement of crops and stock. Such movements are also associated with the introduction of non‐native species via hitchhiking individual organisms. The oyster industry, one of the most important forms of marine aquaculture, embodies these issues. In Europe disease outbreaks affecting cultivated populations of the naturalized oyster Crassostrea gigas caused a major disruption of production in the late 1960s and early 1970s. Mitigation procedures involved massive imports of stock from the species’ native range in the northwestern Pacific from 1971 to 1977. We assessed the role stock imports played in the introduction of non‐native marine species (including pathogens) from the northwestern Pacific to Europe through a methodological and critical appraisal of record data. The discovery rate of non‐native species (a proxy for the introduction rate) from 1966 to 2012 suggests a continuous vector activity over the entire period. Disease outbreaks that have been affecting oyster production since 2008 may be a result of imports from the northwestern Pacific, and such imports are again being considered as an answer to the crisis. Although successful as a remedy in the short and medium terms, such translocations may bring new diseases that may trigger yet more imports (self‐reinforcing or positive feedback loop) and lead to the introduction of more hitchhikers. Although there is a legal framework to prevent or reduce these introductions, existing procedures should be improved. Ciclo de Retroalimentación Positiva entre la Introducción de Especies Marinas No‐Nativas y el Cultivo de Ostras en Europa     

中国关于砷的研究进展

综述了近年来有关中国的砷污染状况、相关的分析监测技术及砷化合物毒性的研究进展.在中国部分地区,长期砷暴露导致了严重的区域性的砷中毒,主要的暴露途径是饮用水、食物和煤炭的燃烧.样品前处理、砷的富集和形态分析技术的丰富和发展,为环境科学、毒理学和流行病学的研究提供了可靠的技术支持.生物检测是一种直接有效的污染物健康风险评估...     

胶团强化超滤处理水中阿特拉津的研究

采用胶团强化超滤去除水中阿特拉津.考察了表面活性剂、pH、操作压力、操作时间以及温度对阿特拉津去除效果的影响.结果表明,胶团强化超滤法能有效去除水中阿特拉津,最佳工艺条件为:采用分子量为5 000 Dalton的聚砜中空纤维膜、SDBS浓度为8.00mmol/L、压力为0.15 MPa、pH为10、温度为25℃.在此条...     

Maintenance-related major accidents: Classification of causes and case study

The potential for major accidents is inherent in most industries that handle or store hazardous substances, for e.g. the hydrocarbon and chemical process industries. Several major accidents have been experienced over the past three decades. Flixborough Disaster (1974), Seveso Disaster (1976), Alexander Kielland Disaster (1980), Bhopal Gas Tragedy (1984), Sandoz Chemical Spill (1986), Piper Alpha Disaster (1988), Philips 66 Disaster (1989), Esso Longford Gas Explosion (1998), Texas City Refinery Explosion (2005), and most recently the Macondo Blowout (2010) are a few examples of accidents with devastating consequences.Causes are being exposed over time, but in recent years maintenance influence tends to be given less attention. However, given that some major accidents are maintenance-related, we intend to concentrate on classifying them to give a better insight into the underlying and contributing causes.High degree of technological and organizational complexity are attributes of these industries, and in order to control the risk, it is common to deploy multiple and independent safety barriers whose integrity cannot be maintained without adequate level of maintenance. However, maintenance may have a negative effect on barrier performance if the execution is incorrect, insufficient, delayed, or excessive. Maintenance can also be the triggering event.The objectives of this article are: (1) To investigate how maintenance impacts the occurrence of major accidents, and (2) To develop classification schemes for causes of maintenance-related major accidents.The paper builds primarily on model-based and empirical approaches, the latter being applied to reports on accident investigation and analysis. Based on this, the Work and Accident Process (WAP) classification scheme was proposed in the paper.     

水刺工艺对PPS滤料产品性能的影响

水刺法相对于针刺法除尘滤料具有多方面的优势,具有更高的过滤效率和较低的排放浓度,可满足更加严格的环境空气质量标准。通过使用PPS纤维预先制成的预针刺毡作为样品,利用不同的水刺工艺进行试验,对其常规性能（厚度、透气量、断裂强度、表面效果）做对比分析,讨论了不同水刺工艺参数设置对水刺PPS滤料产品性能的影响,得出相关结论,有助于实际高压水刺滤料生产中工艺参数的选择。     

利用废弃蛋白质制备氨基酸螯合微肥的研究进展

复合氨基酸螯合微肥是一种高效、无公害环境友好的绿色肥料，开发前景广阔，综述了废弃蛋白质水解制备复合氨基酸螯合微肥的研究现状，展望了氨基酸螯合微肥研究领域的发展。