A review of contamination of surface-, ground-, and drinking water in Sweden by perfluoroalkyl and polyfluoroalkyl substances (PFASs)

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are found in aquatic systems, flora, and fauna worldwide. These potentially harmful compounds are also frequently detected in Sweden and have already resulted in severe problems for public drinking water supply, i.e., some wells had to be closed due to high PFAS concentrations both in raw water and produced drinking water. Knowledge on PFAS occurrence in Sweden is still quite low, although monitoring is currently ongoing. This work describes potential sources for PFASs to enter the drinking water supply in Sweden and compares different occurrences of PFASs in raw and drinking water in the country. Moreover, the monitoring history, the legal situation, and remediation actions taken are presented. Finally, future challenges and the way forward in Sweden are discussed.     

Control of Emissions Through Efficient Use of Atmospheric Dispersion—a Forecast System

Fuel use limitations present a dilemma to both suppliers and users in that fuel with high sulfur content may be prohibited, even though during much of the year meteorological conditions may provide sufficent dispersion to maintain acceptable air quality levels. To make most efficient use of available fuels, a system of varying emissions according to atmospheric parameters is suggested. Objective forecasts of meteorological conditions in terms of dispersion effects can be used to monitor fuel use according to the atmosphere’s ability to disperse pollutants successfully.     

The Utilization of Optimum Meteorological Conditions for the Reduction of Los Angeles Automotive Pollution

Advantage can be taken of optimum conditions of turbulent mixing to decrease the intensity of automobile-caused pollution in the Los Angeles Basin. Changing the summertime peak traffic hours—delaying the morning rush by one hour—will result in an improvement of 24 percent for an eight-hour day, in terms of oxidant concentrations. Greater improvements (up to 54 percent) are possible by use of seven or six-hour days, should they be found to be economically feasible.     

Occurrence and levels of organochlorine compounds in human breast milk in Bangladesh

In low-income countries, the use of some organochlorine pesticides is still common in order to increase food production. Monitoring the chemical exposure is an important step in risk-reducing strategies. This is the first study to report concentrations of organochlorines in breast milk of women from Bangladesh where farming is the main income source.Organochlorines such as p,p′-DDT, o,p′-DDT, p,p′-DDE, p,p′-DDD (i.e., ∑DDT), HCB, α-, β- and γ-HCH, trans-chlordane, cis-chlordane, oxy-chlordane, trans-nonachlor, cis-nonachlor, mirex and polychlorinated biphenyls (CB 28, 52, 99, 101, 105, 114, 118, 123, 128, 138, 141, 149, 153, 156, 157, 163, 167, 170, 180, 183, 187, 189, 194) were analyzed in breast milk collected in 2002 from 72 first-time mothers (median age 20 years) living in the rural area Matlab, Bangladesh.While the concentrations of PCBs and many of the pesticides were low, the concentrations of p,p′-DDT and its metabolite p,p′-DDE were high (median 349 and 1645 ng g⁻¹ lipid, respectively) in comparison to other countries. The median value of ∑DDT was 2123 ng g⁻¹ lipid. The estimated daily exposure to p,p′-DDT, p,p′-DDE and ∑DDTs was 10, 30 and 42 μg kg⁻¹ body weight, respectively, in 3 months old infants. The p,p′-DDE/p,p′-DDT ratio ranged from 1 to 23, where 58% of the mothers had a ratio below 5 indicating recent or ongoing DDT exposure.This study reports infant exposure and maternal body burden of organochlorines through breast milk. Although the findings give no reason to limit breast-feeding, it is essential to identify the main exposure sources and find means to decrease the exposure.     

A remediation performance model for enhanced metabolic reductive dechlorination of chloroethenes in fractured clay till

A numerical model of metabolic reductive dechlorination is used to describe the performance of enhanced bioremediation in fractured clay till. The model is developed to simulate field observations of a full scale bioremediation scheme in a fractured clay till and thereby to assess remediation efficiency and timeframe. A relatively simple approach is used to link the fermentation of the electron donor soybean oil to the sequential dechlorination of trichloroethene (TCE) while considering redox conditions and the heterogeneous clay till system (clay till matrix, fractures and sand stringers). The model is tested on lab batch experiments and applied to describe sediment core samples from a TCE-contaminated site. Model simulations compare favorably to field observations and demonstrate that dechlorination may be limited to narrow bioactive zones in the clay matrix around fractures and sand stringers. Field scale simulations show that the injected donor is expected to be depleted after 5 years, and that without donor re-injection contaminant rebound will occur in the high permeability zones and the mass removal will stall at 18%. Long remediation timeframes, if dechlorination is limited to narrow bioactive zones, and the need for additional donor injections to maintain dechlorination activity may limit the efficiency of ERD in low-permeability media. Future work should address the dynamics of the bioactive zones, which is essential to understand for predictions of long term mass removal.     

Sperm precedence, mating interval, and a novel mechanism of paternity bias in a beetle (Tenebrio molitor L.)

When females mate with more than one male, the ensuing sperm competition leads to the evolution of male mechanisms that skew paternity. Males of the yellow mealworm beetle (Tenebrio molitor) transfer a spermatophore to females during copulation, but sperm release and storage occur later. We investigated how the interval between two matings with different males affects sperm precedence by varying the interval between the copulations so that the second mating was either: (1) before sperm release from the first spermatophore (<5 min); (2) after sperm release but before spermatophore ejection (15–20 min); (3) after spermatophore ejection but before sperm storage (4 h), or (4) after complete sperm storage (24 h). We collected offspring over a period of 2 weeks and determined paternity by protein electrophoresis. There was second-male sperm precedence in all treatments, but when the interval was <5 min, the second male usually (86% of cases) had complete sperm precedence (i.e., P ₂=1). Investigations into the mechanism of second-male sperm precedence during <5-min mating intervals indicate that sperm release from the first spermatophore is inhibited, a phenomenon which has not been previously documented. Received: 31 January 2000 / Revised: 9 June 2000 / Accepted: 26 August 2000     

A longitudinal study of the links between Local Air Quality Management and Local Transport Planning policy processes in England

The second round of the Local Transport Plan (LTP2) process in England presents unique challenges and opportunities for integrating Local Air Quality Management (LAQM) within current transport planning policy. Using content analysis of LTP2 documents from nine English authorities, and results from a questionnaire survey of local government officers undertaken in late 2007, this paper charts the changes in the integration of air quality management within the transport planning process since 1997. While substantial improvements in policy integration were observed within the selected case studies, the paper demonstrates that such improvements are often constrained by institutional complexities that create implementation gaps between national objectives and local decision-making outcomes.     

Elevated radioxenon detected remotely following the Fukushima nuclear accident

We report on the first measurements of short-lived gaseous fission products detected outside of Japan following the Fukushima nuclear releases, which occurred after a 9.0 magnitude earthquake and tsunami on March 11, 2011. The measurements were conducted at the Pacific Northwest National Laboratory (PNNL), (46°16′47″N, 119°16′53″W) located more than 7000 km from the emission point in Fukushima Japan (37°25′17″N, 141°1′57″E). First detections of ¹³³Xe were made starting early March 16, only four days following the earthquake. Maximum concentrations of ¹³³Xe were in excess of 40 Bq/m³, which is more than ×40,000 the average concentration of this isotope is this part of the United States.     

Disaster waste management: a review article

Depending on their nature and severity, disasters can create large volumes of debris and waste. The waste can overwhelm existing solid waste management facilities and impact on other emergency response and recovery activities. If poorly managed, the waste can have significant environmental and public health impacts and can affect the overall recovery process.This paper presents a system overview of disaster waste management based on existing literature. The main literature available to date comprises disaster waste management plans or guidelines and isolated case studies. There is ample discussion on technical management options such as temporary storage sites, recycling, disposal, etc.; however, there is little or no guidance on how these various management options are selected post-disaster. The literature does not specifically address the impact or appropriateness of existing legislation, organisational structures and funding mechanisms on disaster waste management programmes, nor does it satisfactorily cover the social impact of disaster waste management programmes.It is envisaged that the discussion presented in this paper, and the literature gaps identified, will form a basis for future comprehensive and cohesive research on disaster waste management. In turn, research will lead to better preparedness and response to disaster waste management problems.