Mercury pollution in a mining area of Guizhou,China: Fluxes over contaminated surfaces and concentrations in air,biological and geological samples

A dynamic flux chamber has been used to estimate fluxes of mercury over different types of surfaces in an abandoned open‐cut mine of Tongren prefecture, Guizhou province, China during spring and summer of 1996. The highest fluxes were obtained over cinnabar slag and contaminated soils, whereas the emissions above cinnabar ore were substantially lower. These fluxes was scaled up to estimate the contribution of mercury emissions to air from mercury wastes, compared to anthropogenic activities in the province of Guizhou, China. Atmospheric mercury concentrations measured were enhanced in the mining area (<1.3 μg m^‐3) compared to regional background sites (1.8–5.1 ng m^‐3). The spreading of mercury was estimated by using biological and geological samples. Moss bags have been employed to estimate long‐time dry‐ and wet‐deposition to this area.     

Biogenic Mn oxides for effective adsorption of Cd from aquatic environment

Biogenic Mn oxides exert important controls on trace metal cycling in aquatic and soil environments. A Mn-oxidizing bacterium Bacillus sp. WH4 was isolated from Fe–Mn nodules of an agrudalf in central China. The biogenic Mn oxides formed by mediation of this Mn oxidizing microorganism were identified as short-ranged and nano-sized Mn oxides. Cd adsorption isotherms, pH effect on adsorption and kinetics were investigated in comparison with an abiotic Mn oxide todorokite. Maximum adsorption of Cd to the biogenic Mn oxides and todorokite was 2.04 and 0.69 mmol g^?1 sorbent, respectively. Thus, the biogenic Mn oxides were more effective Cd adsorbents than the abiotic Mn oxide in the aquatic environment. The findings could improve our knowledge of biogenic Mn oxides formation in the environment and their important roles in the biogeochemical cycles of heavy metals.     

Anaerobic biodegradation of cellulosic material: Batch experiments and modelling based on isotopic data and focusing on aceticlastic and non-aceticlastic methanogenesis

Utilizing stable carbon isotope data to account for aceticlastic and non-aceticlastic pathways of methane generation, a model was created to describe laboratory batch anaerobic decomposition of cellulosic materials (office paper and cardboard). The total organic and inorganic carbon concentrations, methane production volume, and methane and CO₂ partial pressure values were used for the model calibration and validation. According to the fluorescent in situ hybridization observations, three groups of methanogens including strictly hydrogenotrophic methanogens, strictly aceticlastic methanogens (Methanosaeta sp.) and Methanosarcina sp., consuming both acetate and H₂/H₂CO₃ as well as acetate-oxidizing syntrophs, were considered. It was shown that temporary inhibition of aceticlastic methanogens by non-ionized volatile fatty acids or acidic pH was responsible for two-step methane production from office paper at 35 °C where during the first and second steps methane was generated mostly from H₂/H₂CO₃ and acetate, respectively. Water saturated and unsaturated cases were tested. According to the model, at the intermediate moisture (150%), much lower methane production occurred because of full-time inhibition of aceticlastic methanogens. At the lowest moisture, methane production was very low because most likely hydrolysis was seriously inhibited. Simulations showed that during cardboard and office paper biodegradation at 55 °C, non-aceticlastic syntrophic oxidation by acetate-oxidizing syntrophs and hydrogenotrophic methanogens were the dominant methanogenic pathways.     

深化改革 促进地震事业新发展——“地震科技的基础研究与应用研究”研讨班概述

本文概述了在当前面临地震队伍结构调整和人员分流的新形势下,如何进一步深化改革,追踪地震研究的世界先进水平,筛选和确定地震科研的前沿课题,为制定地震工作的深化改革政策提供科学依据。通过对30年地震预报实践的反思,提出今后发展方向。     

建立城市自然灾害承灾能力指标的思路探讨

本文论述了城市承灾能力的含义，分析了我国城市主要自然灾害以及承文体的类型和致灾因素，探讨了城市承灾能力指标，为城市承灾能力综合评判提供了依据．     

粉尘爆炸反应工程学简要综述

１９９３年在波兰召开的第五届国际粉尘爆炸学术会议上，邓煦帆曾在论文中提议建立粉尘爆炸反应工程学，并提出学科的目的意义、性质、主要组成部分和研究方法。本文拟将国内外有关本学科范围内的贡献，加以简要综述，以期能逐渐形成本学科的自身体系和特点。     

南京理工大学高压实验室及其研制高压水射流切割机

南京理工大学高压实验室自８０年代初建立以来，在高压容器及武器发射管的自紧理论和工程应用、高压零部件研制、高压传感器和信号放大显示系统、高压介质等方面做了大量的工作。９３年以来，进行了水射流切割机的研制工作，解决了超高压缸体的动态密封、高压缸体的自增强、无触点式换向传感器、内衬不锈钢组合型高压容器等诸多问题，试制成功了水射流切割机样机。     

唐山市概况和灾害潜势分析

本文概述了唐山市的基本情况及其经受的自然灾害和发展趋势,这些内容为制定唐山市综合减灾规划的前提和基础。     

膜生物反应器及其组合工艺在有机废水处理中的应用

膜生物反应器是一种膜与生物反应器相结合的废水处理新工艺。介绍了膜生物反应器的种类，特性及其组合工艺。综述了国内外用于有机物废水处理过程中的研究进展及应用现状，并对其发展前景作出了展望。     

炼铁厂2#电除尘的设计与应用

新疆八一钢铁有限责任公司炼铁厂上料系统1^#转运站，1^#a转运站，2^#转运站及1^#、2^#高炉高道料仓在上料时，粉尘污染较为严重，为解决粉尘污染问题，1999年炼铁厂组织设计与施工了40m^2单室卧式3电场除尘器，工程投运后，收尘效果良好，岗位粉尘浓度与外排浓度均低于国家标准。