Volatile fatty acid evolution in biomass mixture composts prepared in open and closed bioreactors

In this study we observed the production of volatile fatty acids (VFAs) during the composting process of compost heaps in two different bioreactors (open and closed) at three different depths (0, 40 and 80 cm). The compost was prepared as a mixture of bio-waste, horse manure, grass and sawdust to ensure sufficient pH conditions in compost heaps. VFA contents in the composting materials were analysed weekly over 14–119 d. The degradation process was monitored, along with temperature, pH, total organic carbon, oxidizable carbon and mono- and oligosaccharides. VFA contents were evaluated with regard to the depth of the sample site in the compost heap and to conditions in the bioreactors. The maximum VFA occurrence was observed during the first 35 d; acetic and propionic acids in particular were determined to occur in each sample. Considerable variations in their formation and elimination were observed in the two bioreactors as well as at the various depths in the compost heaps. Significant correlations were found between individual VFAs, as well as between VFA concentrations and organic carbon contents.     

The concept of the Portuguese National Ecological Reserve: constraints and impossibilities in the Azores Archipelago

The biophysical features of small islands (SI) distinguish them from other territories; isolation, small size and several anthropogenic pressures reduce the resilience of ecosystems and increase their vulnerability to global changes. Many SI have a shortage of infrastructures, institutions and technical/financial resources that hinder planning and require different integrated solutions. In Portugal, the National Ecological Reserve (NER) is legally binding for spatial planning instruments. It aims to defend natural values and areas of ecological value, or sensibility, or susceptible to natural hazards. However, the criteria for the design of NER are strictly set for mainland territory, not taking into account specific features of small islands. A case study of the Azores Archipelago is used to demonstrate that spatial planning instruments should be adapted to island contexts. Such adaptation will increase the effectiveness of their implementation in relation to the protection of natural resources, stability of biophysical structures and prevention of natural hazards. Observing the main differences between mainland and the Azores Archipelago it is possible to define a methodological transposition of the NER aims and goals into an island context. This approach is an answer to the constraints in effective adaptation of spatial planning instruments for islands.     

Naturalness In Biological Conservation

Conservation scientists are arguing whether naturalness provides a reasonable imperative for conservation. To clarify this debate and the interpretation of the term natural, I analyze three management strategies – ecosystem preservation, ecosystem restoration, and ecosystem engineering – with respect to the naturalness of their outcomes. This analysis consists in two parts. First, the ambiguous term natural is defined in a variety of ways, including (1) naturalness as that which is part of nature, (2) naturalness as a contrast to artifactuality, (3) naturalness as an historical independence from human actions, and (4) naturalness as possession of certain properties. After that, I analyze the different conceptions with respect to their implications for the three management strategies. The main conclusion is that there exists no single conception of naturalness that could distinguish between the outcomes of the three management methods. Therefore, as long as the outcomes of the different methods are regarded as being of a different value in conservation, we should either abandon the idea of naturalness as the guiding concept in conservation or use the term natural only in the ways that take both its historical and feature dependent meanings into consideration.     

Global variability of food waste chemical composition and its consequences on the production of biofuels and chemical compounds

Journal of Material Cycles and Waste Management - The use of food waste (FW) for the production of biofuels and value-added compounds is growing worldwide. However, the significant chemical...     

Spatial modeling of factor analysis scores

The use of mosses as biomonitors operates as an indicator of their concentration in the environment, becoming a methodology which provides a significant interpretation in terms of environmental quality. The different types of pollution are variables that can not be measured directly in the environment - latent variables. Therefore, we propose the use of factor analysis to estimate these variables in order to use them for spatial modelling. On the contrary, the main aim of the commonly used principal components analysis method is to explain the variability of observed variables and it does not permit to explicitly identify the different types of environmental contamination. We propose to model the concentration of each heavy metal as a linear combination of its main sources of pollution, similar to the case of multiple regression where these latent variables are identified as covariates, though these not being observed. Moreover, through the use of geostatistical methodologies, we suggest to obtain maps of predicted values for the different sources of pollution. With this, we summarize the information acquired from the concentration measurements of the various heavy metals, and make possible to easily determine the locations that suffer from a particular source of pollution.     

The effect of visitors’ pressure on the spatial variability of sandy soil in an urban parks in Tel Aviv

The effect of visitors' pressure on the spatial variability of soil properties was investigated in three open green areas in Tel Aviv. Six types of micro-environments were chosen: under oak and pine tree canopy with low (OL and PL) and high (OH and PH) visitors' pressure; herbaceous area without visitors' pressure (HE); and resting area under high visitors' pressure (RA). For each micro-environment soil samples were collected from the upper 0-5 cm depth for organic matter content and moisture determination. Before sampling, soil surface compaction and litter biomass were measured. Soil properties were affected by visitors' pressure and by the type of micro-environment. Soil organic matter content and soil moisture proved significantly higher under oak trees at low visitors' pressure. Average litter biomass significantly decreased with increasing visitors' pressure in the tree micro-environments. Average penetration depth decreased significantly with increased visitors' pressure in all micro-environments. In all the cases where averages significantly decreased, variance significantly decreased too, but the coefficient of variations increased. This means that variances changed slower than averages. Changes in averages were accompanied by a change of data population structure, which indicated more soil spatial homogeneity under high visitors' pressure. The data from different intervals of data population of soil properties demonstrated the different sensitivity to visitors' pressure.     

Estimate of the uncertainty in measurement for the determination of mercury in seafood by TDA AAS

An approach for the estimate of the uncertainty in measurement considering the individual sources related to the different steps of the method under evaluation as well as the uncertainties estimated from the validation data for the determination of mercury in seafood by using thermal decomposition/amalgamation atomic absorption spectrometry (TDA AAS) is proposed. The considered method has been fully optimized and validated in an official laboratory of the Ministry of Agriculture, Livestock and Food Supply of Brazil, in order to comply with national and international food regulations and quality assurance. The referred method has been accredited under the ISO/IEC 17025 norm since 2010. The approach of the present work in order to reach the aim of estimating of the uncertainty in measurement was based on six sources of uncertainty for mercury determination in seafood by TDA AAS, following the validation process, which were: Linear least square regression, Repeatability, Intermediate precision, Correction factor of the analytical curve, Sample mass, and Standard reference solution. Those that most influenced the uncertainty in measurement were sample weight, repeatability, intermediate precision and calibration curve. The obtained result for the estimate of uncertainty in measurement in the present work reached a value of 13.39%, which complies with the European Regulation EC 836/2011. This figure represents a very realistic estimate of the routine conditions, since it fairly encompasses the dispersion obtained from the value attributed to the sample and the value measured by the laboratory analysts. From this outcome, it is possible to infer that the validation data (based on calibration curve, recovery and precision), together with the variation on sample mass, can offer a proper estimate of uncertainty in measurement.     

PLA and Montmorilonite Nanocomposites: Properties, Biodegradation and Potential Toxicity

The concern related to solid waste increases efforts to develop products based on biodegradable materials. At present, PLA has one of the highest potentials among biopolyesters, particularly for packaging. However, its application is limited in some fields. In order to optimize PLA properties, organo-modified montmorilonites have been extensively used to obtain nanocomposites. Although PLA nanocomposites studies are widely reported in the literature, there is still few information about the influence of organoclays on de biodegradation process, which is a relevant information, since one of the main purposals related to the final disposal of biopolymers as PLA is composting. Besides, in the last years some research has been conducted in order to evaluate the potential toxicity of montmorilonite, unmodified or organo-modified. Since the use of montmorilonite is expanding in different applications, human exposure and risk assessment are important issues to be investigated. In this context, this review intends to compile available information related to common organoclays used for PLA nanocomposites, its properties, biodegradation analysis and potential toxicity evaluation of nanocomposites, focused on montmorilonite as filler. Two issues of relevance were pointed out. The first is food safety and quality, and the second consideration is the environmental effect.