Innovative technologies to remove alkylphenols from wastewater: a review

Environmental Chemistry Letters - Alkylphenols and alkylphenol polyethoxylates are emerging hazardous contaminants due in particular to their endocrine-disrupting properties. These compounds...     

Electrochemical treatment of wastewater to remove contaminants from the production and disposal of plastics: a review

Wastewater is major source of contaminants originating from the production, usage, and disposal of plastic materials. Due to their poor biodegradability of these contaminants in municipal wastewater treatment plants, additional advanced oxidation processes such as electrochemical treatments have been developed to improve the standard biological treatment. Here we review the applications of electrochemical treatments of wastewater for the removal of the following plastic contaminants: bisphenol A, phthalic acid esters, and benzotriazoles. We present the effectiveness of treatment in terms of contaminant removal and mineralization; the identification of transformation products; toxicity assessment; and process energy requirements. In the present review, we have focused on the applications of electrochemical treatments of wastewater for the removal of three important groups of contaminants originating mainly from plastics: bisphenol A, phthalic acid esters, and benzotriazoles. The review focuses on the research of electrochemical treatments for these contaminants from the last five years. The papers are assessed from the point of i) effectiveness of treatment in terms of contaminant removal and mineralization; ii) identification of transformation products; iii) toxicity assessment; iv) processes’ energy requirements. Electrochemical treatments were confirmed to be a viable option for the removal of selected contaminants from wastewater.

     

Application of the QuEChERS method for the determination of organochlorine pesticide residues in Brazilian fruit pulps by GC-ECD

The Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method was applied to the extraction of 14 organochlorine pesticides (OCPs) residues from commercial fruit pulps available in supermarkets in Fortaleza, Northeastern Brazil. The analyses were carried out by gas chromatography (GC), coupled to an electron-capture detector (ECD), and were confirmed by GC-tandem mass spectrometry (MS). The parameters of the analytical method, such as accuracy, precision, linear range, limits of detection and quantification, were determined for each pesticide. The results showed good linearity (R² ≥ 0.9916) and the overall average recoveries were considered satisfactory obtaining values between 69 and 110%, RSD of 2–15 %, except for hexachlorobenzene (HCB) in açai, acerola and guava pulp samples. The OCPs were detected in guava (α–HCH; lindane) and soursop (α, β–HCH isomers) samples. The QuEChERS method and GC–ECD were successfully used to analyze OCPs in commercially available Brazilian fruit pulps and can be applied in routine analytical laboratories.     

Genetic toxicity in surface water from Guaíba Hydrographic Region under the influence of industrial, urban and agricultural sewage in the Drosophila wing-spot test

Mutagenic and recombinagenic activity of surface waters in the Guaíba Hydrographic Region (RS, Brazil) was investigated using the SMART in Drosophila melanogaster. Two positive results in Caí River (September 2000 and August 2001) and in Taquari River (August 2001 and February 2002)--linked to direct recombinagenic toxicants were observed. In Jacuí samples, an indirect mutagenic and recombinagenic action was detected in a September 2000 collection and a direct recombinational activity was observed in February 2002. Also in February 2002--samples from Dilúvio Brook and Guaíba Lake (GPC) were able to induce wing spots by mitotic recombinagenesis. The former sampling site showed toxicants to have a direct action, and the latter an increment in mitotic recombination that depended on metabolic action. The SMART wing test shows that all positive responses were mainly related to homologous mitotic recombination.     

Extraction of arsenate and arsenite species from soils and sediments

The primary objective of this study was to develop a simple method that can be used to extract the more readily mobilizable and bioavailable arsenic species from soil and sediment while at the same time minimizing the transformation between (AsIII) and (AsV), the two most commonly found arsenic species in the environment. Several extraction strategies were evaluated using phosphate as extractant in combination with either ethylenediaminetetraacetic acid (EDTA), hydroxylamine hydrochloride (NH2OH.HCl), or sodium diethyldithiocarbamate trihydrate (NaDDC). The addition of EDTA in the phosphate solution did not prevent AsIII from oxidation. While promising results were shown when 1% NH2OH.HCl was added, conversion of AsIII began to occur with extended extraction time (> 12 h). Good results were achieved using 10 mM phosphate and 0.5% NaDDC where AsIII oxidation was clearly minimized. The combined phosphate and NaDDC solution was applied to several soil and sediment samples. AsIII spiked was quantitatively recovered in all soil types tested.     

The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

Colonization and early succession on artificial hard substrata by meiofauna

An experiment was undertaken at Farol Island, Brazil, to examine colonization of bare aluminium surfaces by microbes and meiofauna. It was hypothesized that a primary source of meiofaunal colonists was sediment resuspended during upwelling events, two of which occurred during the experiment. Microbial biofilms formed on the experimental substrata within 1 day, and continued to develop throughout the experimental period. Among meiofaunal groups copepods also appeared on the first day, and nematodes on the second. Meiofaunal community structure developed in three main phases: an initial phase of 2 days, characterized by low abundances of copepods; a second phase during the first upwelling period characterized by higher abundances of copepods and also by turbellarians; and a third phase from day 13 onwards characterized by relatively stable abundances of a range of taxa including copepods, cirripedes, nematodes and ostracods. Nematode assemblages also developed in three phases, but with different timings coinciding with upwelling events: an initial phase, from the beginning of the experiment to day 9, characterized by few species and low (or no) abundances; a second phase following the first upwelling characterized by moderate abundances of Chromadorina, Chromadorella, Daptonema and Euchromadora sp. 3; a third phase following the second upwelling period (from day 26 onwards) in which Daptonema disappeared and the assemblage was characterized by moderate to high abundances of Euchromadora (species 1 and 2) and Chromadorella. Although shifts in nematode assemblage structure coincided with upwelling events no evidence was found for sediments being the primary source of colonizers on the aluminium substrata, in contrast to our hypothesis.     

A combination of ion exchange and electrochemical reduction for nitrate removal from drinking water. Part I: nitrate removal using a selective anion exchanger in the bicarbonate form with reuse of the regenerant solution.

The process of selective nitrate removal from drinking water by means of ion exchange was studied. A commercial strong base anion exchanger with triethylammonium (-N+Et3) functional groups was used in the bicarbonate (HCO3-) and carbonate (CO3(2-)) form. The aim of this study was to optimize ion-exchanger regeneration in view of the subsequent electrochemical reduction of nitrates in the spent regenerant solution. The effects of ion-exchanger form, concentration of regenerant solution, and presence of nitrates, chlorides, and sulphates in the regenerant solution were studied. The strong base anion exchanger in HCO3- form that was investigated was able to treat 270 bed volumes of model water solution containing 124 mg dm(-3) nitrates. To achieve adequate regeneration of the saturated anion exchanger, it is necessary to use approximately 30 bed volumes of fresh 1-M sodium bicarbonate (NaHCO3) regenerant solution. The presence of residual 50-mg dm(-3) nitrates in the regenerant solution, treated by electrolysis, resulted in an increase in the dose of regenerant solution to 35 bed volumes and a decrease in the subsequent sorption run of approximately 13%. The volume of applied regenerant solution was high, but the consumption of NaHCO3 for regeneration was low.     

Economic assessment of the negative impacts of ozone on crop yields and forest production. A case study of the estate Ostads Säteri in southwestern Sweden

Ground level ozone concentrations, in combination with the prevailing climate, at the estate Ostads S?teri in southwestern Sweden were estimated to reduce the yield of wheat and potato ranging between 5% and 10%. Occasionally, in years with the highest ozone concentrations and/or climatic conditions favoring high rates of ozone uptake to the leaves, yield loss levels above 10% may occur. Based on simple extrapolation, these ozone-induced reductions of crop yields at Ostads S?teri represent a potential total annual yield loss in Sweden in the range of 24.5 million Euro for wheat and 7.3 million Euro for potato, respectively. A simulation of forest growth at Ostad S?teri predicted that prevailing mean ozone exposure during 1993-2003 had the potential to reduce forest growth by 2.2% and the economic return of forest production by 2.6%. Using this value for extrapolation to the national level, the potential annual economic loss for Sweden due to negative impacts of ozone on forest production would be in the range of 56 million Euro (2004 prices).     

Efficient use of Fe metal as an electron transfer agent in a heterogeneous Fenton system based on Fe0/Fe3O4 composites

In this work a novel heterogeneous Fenton system based on Fe(0)/Fe3O4 composites is described. The composites with several Fe(0)/Fe3O4 ratios were prepared by two different methods, i.e. mechanical alloying of Fe(0) and Fe3O4 powders and controlled reduction of Fe3O4 with H2. Reaction studies and detailed Conversion Electron M?ssbauer surface characterization of the composites Fe(0)/Fe3O4, Fe(0), Fe3O4, alpha-Fe2O3 and gamma-Fe2O3 suggested that Fe2+surf species are essential to produce an active Fenton system. Kinetic studies for the oxidation of the dye methylene blue, used as an organic model molecule, and for the peroxide decomposition suggest that the reactions proceed via HO* radicals generated from Fe2+surf species and H2O2 in a Fenton like mechanism. The increase in activity caused by the addition of Fe(0) is discussed in terms of a creation of Fe2+surf species during the preparation of the composite and by an electron transfer mechanism from Fe(0) to Fe3+surf during the Fenton reaction to regenerate the Fe2+surf active species.