Determination of selected quaternary ammonium compounds by liquid chromatography with mass spectrometry. Part I. Application to surface, waste and indirect discharge water samples in Austria

A method for simultaneous quantitative determination of alkyl benzyl, dialkyl and trialkyl quaternary ammonium compounds (QACs) has been developed, validated and subsequently applied to real water samples in Austria. The method employs liquid-liquid extraction (LLE) followed by liquid chromatography/tandem mass spectrometry (LC-MS/MS), using electrospray ionization (ESI) in positive mode. The overall method quantification limits range from 4 to 19ng/L for the enrichment of 500mL water samples and analyte recoveries are between 80 and 99%. The method was applied to 62 of the respective water samples without filtration to avoid the loss of the analytes due to the high adsorption capacity of these compounds. Maxima in the mg/L range, especially in the wastewater of hospitals and laundries, could be detected for the selected target compounds.     

Fate of cancerostatic platinum compounds in biological wastewater treatment of hospital effluents

The present work focuses on the fate of two cancerostatic platinum compounds (CPC), cisplatin and carboplatin, as well as of two inorganic platinum compounds, [PtCl₄]²⁻ and [PtCl₆]²⁻ in biological wastewater treatment. Laboratory experiments modelling adsorption of these compounds onto activated sludge showed promising specific adsorption coefficients K_D and K_OC and Freundlich adsorption isotherms. However, the adsorption properties of the investigated substances were differing significantly. Adsorption decreased following the order cisplatin > [PtCl₆]²⁻ > [PtCl₄]²⁻ > carboplatin. Log K_D-values were ranging from 2.5 to 4.3 , log K_OC from 3.0 to 4.7.

A pilot membrane bioreactor system (MBR) was installed in a hospital in Vienna and fed with wastewater from the oncologic in-patient treatment ward to investigate CPC-adsorption in a sewage treatment plant. During three monitoring periods Pt-concentrations were measured in the influent (3–250 μg l⁻¹ Pt) and the effluent (2–150 μg l⁻¹ Pt) of the treatment plant using ICP-MS. The monitoring periods (duration 30 d) revealed elimination efficiencies between 51% and 63% based on averaged weekly input–output budgets. The derived log K_D-values and log K_OC-values ranged from 2.4 to 4.8 and from 2.8 to 5.3, respectively. Species analysis using HPLC-ICP-MS proofed that mainly carboplatin was present as intact drug in the influent and – due to low log K_D – in the effluent of the MBR.     

Chemical defense of the mint plant, Teucrium marum (Labiatae)

Summary. The mint plant, Teucrium marum (family Labiatae), sometimes called cat thyme, contains two methylcyclopentanoid monoterpenes, dolichodial and teucrein. The former compound is potently anti-insectan. It is repellent to ants (Monomorium pharaonis) and induces preening reflexes in flies (Phormia regina) and cockroaches (Periplaneta americana). Evidence is presented suggesting that dolichodial, which is presumed to be the plant's chief defensive agent, is stored in the tiny epidermal capsules that beset the leaves. It is only when the leaves are injured (and the capsules ruptured) that the leaves become repellent. Teucrein, in contrast, has no anti-insectan potency. It is present predominantly in the leaf buds, unlike dolichodial, which is present mostly in mature leaves. It is argued that teucrein is the storage compound from which dolichodial is generated during leaf development.     

Performance Evaluation of Multiple Groundwater Flow and Nitrate Mass Transport Numerical Models

Environmental Modeling & Assessment - Benchmarking of different numerical models simulating groundwater flow and contaminant mass transport is the aim of the present study, in order to...     

Applying the Kuhn–Tucker model to estimate the value of recreational ecosystem services in Sicily

This paper applies the Kuhn–Tucker model to estimate recreation demand of parks in Sicily. We estimate a fixed coefficient specification and a random coefficient specification to take into account heterogeneity across visitors. Estimates suggest a diversity of preferences across the population and that parks with higher level of quality attributes are more likely to be visited. We also simulate two sets of hypothetical policy scenarios to evaluate and compare the recreational value of each park and the welfare impacts of changes in a quality attribute.     

Result-oriented approaches to the management of drinking water catchments in agricultural landscapes

Management of water quality in drinking water catchments is of ongoing, high importance as nitrate concentrations are often still very high. We analysed the Augsburg catchment in Germany, a unique example where a result-oriented approach has been implemented. We investigated the historical evolution of the water protection programme, the result-oriented payment contracts with farmers, and farmer satisfaction with the contracts, based on interviews with the water utility and farmers as well as an analysis of the literature. Today, the water protection programme has been successfully implemented, and a significant reduction of nitrate concentration was achieved due to the following factors: (1) investment of non-negligible amounts of money for high compensation and remuneration payments, (2) different contract options, (3) farmers’ participation in the negotiation process for result-oriented payment contracts, (4) involvement of “outside” people and institutions in negotiation processes, (5) anticipation of starting a programme when nitrate levels were still far below legislative thresholds, and (6) a political and legislative framework allowing direct decisions by a water supplier.     

Landfill leachate enhances fermentative hydrogen production from glucose and sugarcane processing derivatives

Fermentation can use renewable raw materials as substrate, which makes it a sustainable method to obtain H₂. This study evaluates H₂ production by a mixed culture from substrates such as glucose and derivatives from sugarcane processing (sucrose, molasses, and vinasse) combined with landfill leachate. The leachate alone was not a suitable substrate for biohydrogen production. However, leachate blended with glucose, sucrose, molasses, or vinasse increased the H₂ production rate by 2.0-, 2.8-, 4.6-, and 0.5-fold, respectively, as compared with the substrates without the leachate. Determination of metals (Cu, Cd, Pb, Hg, Ni, and Fe) at the beginning and at the end of the fermentative assays showed how they were consumed during the fermentation and demonstrated improved H₂ production. During fermentation, Cu, Fe, and Cd were the most consumed leachate metals. The best substrate combination to produce H₂ was molasses and leachate, which gave high volumetric productivity—469 ml H₂/l h. However, addition of the leachate to the substrates stimulated lactic acid formation pathways, which lowered the H₂ yield. The use of leachate combined with sugarcane processing derivatives as substrates could add value to the leachate and reduce its polluting power, generating a clean energy source from renewable raw materials.     

One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.